HANGAR 9 P-51D MUSTANG - DLE 20cc RC ARF 69.5" 1/6 SCALE WARBIRD - FLIGHT TEST # 1 - DEANO

No video

HANGAR 9 P-51D MUSTANG - DLE 20cc RC ARF 69.5" 1/6 SCALE WARBIRD - FLIGHT TEST # 1 - DEANO - 2019

Рет қаралды 91,812

Күн бұрын

(PART ONE OF TWO)
CHECK OUT PART TWO OF DEANO FLYING HER AT AN AIRBASE -
• HANGAR 9 P-51D MUSTANG...
ANOTHER WINNER FROM THE HORIZON HOBBY STABLE - THIS 1/6 SCALE 20cc (60 SIZE) WARBIRD CERTAINLY FITS THE FIGHTER PILOT WANNABES PROFILE !
IT CAN BE POWERED BY PETROL OR GLOW OR ELECTRIC - CHOICE IS YOURS PEEPS,
WE ARE FLYING HER ON A DLE 20cc PETROL SIDE EXHAUST WITH PITTS MUFFLER TURNING A 16X8 MASTER AIRSCREW,
WE CHOSE THE SIDE EXHAUST VERSION BECAUSE THE REAR EXHAUST BOLT ON EXHAST PIPE IS SMALL AND QUITE LOUD !
CHECK OUT THESE SPECS ON THE MODEL -
Airfoil Shape: - Semi Symmetrical
CG (Center of Gravity): - 6 9/32" (160 mm) behind leading edge of the wing
Completion Level: - Almost Ready-To-Fly
Control Throw (Flaps): - Take-off 13/32 inches (10 mm) Landing 25/32 inches (55 mm)
Control Throw - High (Ailerons): - 7/8 inches (22 mm)
Control Throw - High (Elevator): - 7/16 inches (11 mm)
Control Throw - High (Rudder): - 1 15/32 inches (35 mm)
Control Throw - Low (Ailerons): - 5/8 inches (16 mm)
Control Throw - Low (Elevator): - 1/4 inches (6.5 mm)
Control Throw - Low (Rudder): - 1 inch (25 mm)
Engine Size: - 20cc 2 to 4-stroke gas/petrol (sold separately)
Flaps: - Yes
Flying Weight: - 11.5-13lbs (5200-5900 g)
Landing Gear: - Yes
Length: - 60" (1.52m)
Material: - Balsa Wood
Minimum Required Radio: - 5+ channel
Minimum Speed Control: - 80 Amp
Motor Size: - Power 60 1800W outrunner with 80A ESC and 6S LiPo (sold separately)
Propeller Size: - 16 x 8
Recommended Motor Battery: - 6S 5000-7000 mAh Lipo
Recommended Receiver Battery: - 2000 mAh 2S 7.4V LiPo or higher
Retracts: - Optional
Servos: - Standard Digital, 7-8 required (sold separately)
Spinner Size: - 3.7" (95mm)
Trimscheme Colors: - Printed Covering
Wing Area: - 848 sq in (54.7 sq dm)
Wing Loading: - 32.6 oz/sq ft
Wingspan: - 69.5" (1.76m)
FEATURES -
Expertly constructed with lightweight, laser-cut balsa and plywood
Finely detailed, satin-finish covering includes scale nomenclature, panel lines, and more
Two decal sets let you customize the trim in “Geraldine” or “Sky Bouncer” livery
Detailed cockpit includes a 3D instrument panel, expertly painted pilot bust and more
Rugged fixed landing gear with 4-inch wheels and realistic shock-absorbing struts (included)
Retract ready-optional E-flite® electric retracts available
Functional flaps expand the flight envelope and enhance scale functionality
Scale control surface hinge lines, gear doors, wing guns and antenna
Painted cowl with simulated engine and exhaust detail
Scale spinner with matching paint finish
Optional-use wing pylons with removable drop tanks
Two-piece, plug-in wing for easy transport and final assembly
Large top-hatch offers complete access to the electronics and fuel tank
Complete hardware package includes everything for EP or gas power recommendations
NEEDED TO COMPLETTE -
20cc two- or four-stroke gas engine or equivalent electric motor system
Full-range, 5+ channel transmitter and receiver (6+ for the retract option)
(8) Standard-size servos (7 for the electric power option)
(2) Batteries for receiver and engine ignition (for the gas power option)
(1) Propeller
PLEASE LIKE US ON FACEBOOK AND SUBSCRIBE TO OUR CHANNEL TBOBBORAP1 AND FOLLOW US ON TWITTER NOW AND KEEP UP TO DATE AND WATCH OUR HD / 4K QUALITY RC MODELS VIDEOS AND PICTURE UPDATES OF THE MAJOR UK RC SHOWS AND CLUB FLY-INS AT -
/ tbobbo. .
/ tbobborap1
/ tbobborap1
FILMED DOWN THE PATCH ON 6-5-2019

Пікірлер: 178

@guilhermegarcia4338 3 ай бұрын

This plane is beautiful, in my point of view this is the most beautiful design that I saw about p51 !!!

@barqwoof 5 жыл бұрын

Pete, I understand the passion you and your son Deano have for the full blown aerobatics and his competition but my heavens. What an amazing "scale" flight performance with one beautiful model. Deano, thank you. Jim

@tbobborap1 5 жыл бұрын

thanks jim, yes deano also has a passion for warbirds and fast jets - check him out flying his 1/4 scale mustang (unless you've already seen it) - kzfaq.info/get/bejne/fbuUadeL1N7an2g.html

@tbobborap1 5 жыл бұрын

also this one jim - kzfaq.info/get/bejne/qp10odN4ybSyh5c.html

@matjazpajek4390 4 жыл бұрын

One of the best video showing p51, flying as it should. Great work and beautiful plane. Very nice flying

@tbobborap1 4 жыл бұрын

many thanks matjaz - check out part two here - kzfaq.info/get/bejne/nK2Krad9r7ndqJc.html

@tbobborap1 5 жыл бұрын

CHECK OUT PART TWO OF DEANO FLYING HER AT AN AIRBASE - www.youtube.com/watch?v=fGZzD...

@just-incase3483 4 жыл бұрын

I like the way he fly’s, not afraid to hit the ground or break it!

@tbobborap1 4 жыл бұрын

yep - fly it like he stole it - lol

@arthurvanaalst 5 жыл бұрын

Dear friends, I have been watching your videos for some time and I enjoy it every time. Deano is really a fantastic pilot and I know almost no one who can measure this. I have seen a few movies from the past when he was young and you could already see that he was in his fingers. Nice father and son the same hobby. Thank you for your publications and many greetings from the Netherlands of a model building enthusiast.

@tbobborap1 5 жыл бұрын

wow - many thanks for your kind comments Arthur, its nice to know that you've watched our channel for a while now, yes im very proud of deanos rise in the rc ranks inc his two years winning of the freestyle masters comp, its nice to get pleasant feed back from you and many of my subscribers over the years as it helps me deal with all the dumb crap questions & insults I get off many other subscribers, greetings to you in the Netherlands and may you build many many more models in future - regards pete & deano

@emanuelmota7217 6 ай бұрын

If this video doesn't sell a BUNCH of these H9 20cc P51's I don't know what would. Beautiful plane, very scale, and excellent flying from Deano (as usual). If I didn't already have three warbirds ....

@tbobborap1 6 ай бұрын

Many thanks emanuel

@BuckleyRoadBand 3 жыл бұрын

Just love this video! I'm flying this bird on a Power 60 with 6S battery and happy with her performance. However, every time I watch this video I want to convert her to gas! Great flying!

@tbobborap1 3 жыл бұрын

thanks steve, keep her electric and then get the H9 P-47 and go gas ! - kzfaq.info/get/bejne/qdNnlqWBxsmsgY0.html

@BuckleyRoadBand 3 жыл бұрын

@@tbobborap1 You read my mind! Guess what Santa brought me for Christmas! Hanger 9 20cc P-47!

@tbobborap1 3 жыл бұрын

lol - youll love it steve, keep the C of G at the forward measurement on both models and they will fly and land just right m8, thanks for subscribing as well,

@stevenmurray5860 5 жыл бұрын

You know I have a special place for the Stang! Great coverage T-Bob!

@tbobborap1 5 жыл бұрын

thanks steve, glad you liked it

@Zipperneck. 5 жыл бұрын

As a warbird should be flown: Balls to the Wall, Baby!

@tbobborap1 5 жыл бұрын

oh yeahhhhhh

@arturoespinosa8985 4 жыл бұрын

Beautiful flight, very fast and must of all very well flew. Perfect balance and control.

@tbobborap1 4 жыл бұрын

thanks Arturo, a brilliant little model

@453421abcdefg12345 5 жыл бұрын

A really impressive demonstration, this looks fun !

@tbobborap1 5 жыл бұрын

thanks chris, awesome little model m8

@waynelee6307 5 жыл бұрын

Way to whoop that mustang around Deano, getting better every day. Thanks Pete

@tbobborap1 5 жыл бұрын

lol - thanks wayne, I was waiting for him to start his 3d schedule on the poor little thing

@easystar123 5 жыл бұрын

A really nice warbird and expertly flown. Well done.

@tbobborap1 5 жыл бұрын

thanks aiden

@cbgadget4740 5 жыл бұрын

Super video Pete, beautiful airplane. The flaps down flying was great. That Deano is an amazing pilot. Really enjoyed the end of video specs on the plane 👍👍👍😎😎😎 Cary

@tbobborap1 5 жыл бұрын

thanks cary, lovely little model this one

@pfmurphy525 4 жыл бұрын

Nice review & really nice flying. Thanks.

@tbobborap1 4 жыл бұрын

thanks paul

@justanotherguy469 5 жыл бұрын

Wow, you give more information than Horizon Hobby. Great flying by the way. I'm building a 1/7 scale Stuka Dive Bomber that I bought form Tower Hobbies. I just installed the Bordakone 1.3 cannons under the wing and installing a detailed cockpit from Scale Cockpits, running on a DLE 20. My first plane and will be my first time flying I am going to install 6 axis gyro to help me stabilize and am practicing with Horizon flight simulator. Thanks for the great video. It was inspirational.

@tbobborap1 5 жыл бұрын

thanks guy, id hold off flying your stuka as a first ever model if I were you and buy a foamie trainer / sports model to learn on first ! something like a wot 4 or a riot would help you gain the experience youll need to fly the stuka - pete,

@justanotherguy469 5 жыл бұрын

@@tbobborap1 Thanks for the advice. I think I will do that.

@FarmerFpv 5 жыл бұрын

You fly that thing like it's on rails. One of the best tracking P51's I have seen. Superb work on the sticks! 🔥 subscribed.

@tbobborap1 5 жыл бұрын

many thanks for the sub farmer, glad you liked the vid, amazing little model for sure

@FarmerFpv 5 жыл бұрын

@@tbobborap1 you're welcome, it was definitely a pleasure watching you fly!

@tbobborap1 5 жыл бұрын

thanks again

@FroggyFrog9000 5 жыл бұрын

I need one of these ARFs thats a little bit bigger, that I can fit in....

@kittyhawksydney5114 3 жыл бұрын

Great Flight ! Great Pilot!

@tbobborap1 3 жыл бұрын

Glad you enjoyed it

@jonathanmoon9926 5 жыл бұрын

Very nice, looking good!

@tbobborap1 5 жыл бұрын

thanks jon, great little flyer m8

@jonathanmoon9926 5 жыл бұрын

@@tbobborap1 look forward to seeing her fly myself, looks like she's on rails.

@tbobborap1 5 жыл бұрын

shes the same as my old p-47 m8, very smooth and predictable !

@skidillydiddily8571 5 жыл бұрын

Been tempted for a while now for one of these, think I will now grab one before they are discontinued! What prop size were you using, sounded a bit of a noisy little beast!

@tbobborap1 5 жыл бұрын

actually shes very quiet on a pitts style muffler skid, run her on a master airscrew 16x8

@johnkinnane547 5 жыл бұрын

Nice aircraft Pete and Dean you certainly improved the angle on the flaps, it would look really good with a four blade prop and it’s a bit of a pity how that muffler sticks out the side of the cowling good one John

@tbobborap1 5 жыл бұрын

cheers john,

@josipvrandecic2472 5 жыл бұрын

A perfect test ... thank you both. Note: Engine works fantastically at all positions (neg and pos G)

@tbobborap1 5 жыл бұрын

many thanks jos, great little engines - well worth the price, awesome little model as well my friend

@georgevprochazka5316 3 жыл бұрын

Hi Bob, is there any other DLE muffler option that would fit without having to cut out the side of the cowl ? Thanks

@tbobborap1 3 жыл бұрын

hi george, yes if you buy the rear exhaust dle 20 engine then you can have an exhaust can directly out of the back of the engine with no need to cut the cowl out !

@TheFleckening 5 жыл бұрын

Throw some Nerf whistles in that thing and you've got yourself a winner!

@tbobborap1 5 жыл бұрын

lol - thanks ryan

@hishobby 5 жыл бұрын

Amazing So nice

@tbobborap1 5 жыл бұрын

thanks hobby

@specialized29er86 5 жыл бұрын

A beautiful model, going to get one the same with a 4 stroke engine.

@tbobborap1 5 жыл бұрын

nice - youll love it

@tuckercoffey9708 4 жыл бұрын

How much elevator throw are you using?? Hoping to maiden mine when the weather clears up.

@tbobborap1 4 жыл бұрын

its in the video description

@jingyuhan2766 2 жыл бұрын

I am always on the lookout for your wonderful flights and videos. Thank you very much. I am currently building this H9 P51 and will try my first flight soon. I see you do not use any flap mixing. Can you tell me if the nose of this P51 goes up or down when full flap? Your advice will be very helpful for me trying my first flight.

@tbobborap1 2 жыл бұрын

many thanks for watching our videos jingyu, we balanced this model on the recommended forward C of G measurement in the manual and when full flaps are deployed there is no pitch change at all, i think we actually mention it in one of these videos somewhere - have you seen the 3 other videos of this model that we have filmed ? happy landings,

@p3arljam26 5 жыл бұрын

Great flying as always now Hangar 9 needs to come out with some 30cc warbirds.

@tbobborap1 5 жыл бұрын

thanks jam, great idea m8

@jonathanoxlade4252 3 жыл бұрын

They have a 50cc model its quite a big plane if you have space for it

@mischef18 5 жыл бұрын

Looks great and fly's well bro. Are these off the shelf planes or is there some construction involved. All the best

@tbobborap1 5 жыл бұрын

rtfs ken, they are 75% built and covered and you then put the model together m8

@justanotherguy469 5 жыл бұрын

@@tbobborap1 The only problem I have found is that the instructions are in a Chinese English.

@Raelman 5 жыл бұрын

That's nice...

@tbobborap1 5 жыл бұрын

thanks israel

@NmNColt 5 жыл бұрын

Title says RTF - Is there a hanger 9 version that's truly RTF? Engine servos -etc? I got out of flying a few years ago after 15 years in. I'd love a gas turn key option

@tbobborap1 5 жыл бұрын

sorry scott should read ARF (changed it now ta) no you cannot buy the full package that im aware of - unless a model shop can sell you everything in one hit !

@emanuelmota7217 6 ай бұрын

Yes, you can buy rc planes RTF - on the used market! Here in the US I look at Flying Giants classified (get most of my planes this way - and they're RTF! (just put in your own receiver). Of course you REALLY should inspect everything first and fix any deficiencies)

@getoneup2585 5 жыл бұрын

Is there no end to deanos talent Pete ??? Amazing flying m8 and can't wait to see you flying her the next time we hook up bud 👍👍👍

@tbobborap1 5 жыл бұрын

thanks paul, be good to catch up m8

@dennisstanley4059 2 жыл бұрын

I hear your father in the video mention that you needed to change props, which prop did you end up going to for the best performance? Also the flap settings that you show in your video are those per the manual? I am building the exact same combination. Thank you very much for your help.

@tbobborap1 2 жыл бұрын

we went for a master airscrew 16x8 in the end dennis, cant remember what the manual flap throws were but as you can see we dropped them down at 90 degrees and they work perfectly

@dennisstanley4059 2 жыл бұрын

@@tbobborap1 Thank you very much

@tbobborap1 2 жыл бұрын

@@dennisstanley4059 shes a great little model to fly if set up propperly dennis. Hope yours goes well. Let me know how she flies 👍

@daykin17 4 жыл бұрын

If you don't mind me asking Deano, which aircraft was friendlier to fly, the Hanger 9 P-47 or the P-51 ?? Thanks

@tbobborap1 4 жыл бұрын

good question day (pete here - deanos dad) both model fly and land superbly and are fully aerobatic, the p-47 is a little heavier than the p-51d so cannot be thrown around as tightly as the mussy because of the higher wing loading but dont let that put you off its just as good as the p-51d - neither of them stall at low or high speed unless you really push your luck, weve not stalled either of them in normal flying so the choice is yours day !

@daykin17 4 жыл бұрын

@@tbobborap1 Thanks Pete, appreciate it...and keep up the amazing vids

@barknozer3076 Жыл бұрын

Would it be better to use a 25 cc engine or is 20 cc enough?

@tbobborap1 Жыл бұрын

what do you think by watching the video ?

@barknozer3076 Жыл бұрын

@@tbobborap1 It dies while climbing. So maybe?

@BelloBudo007 4 жыл бұрын

Not a models guy but boy that was really good to watch. Just curious if cannon/machine gun sound is an option?

@tbobborap1 4 жыл бұрын

cheers bill, you can fit sound generators but more money and weight and the engine will drown it out !

@astroworld744 5 жыл бұрын

Hello just wondering what fuel mix and type of oil you use that engine never missed a beat , ive got the same model and am a little nervous on putting the cowl on it as my past 4 warbirds have all over heated or had some form of vapour lock do you do anything special to cool the engine in a cowl like that , i also have dle engines

@tbobborap1 5 жыл бұрын

hi paul great question m8, we use red line semi synthetic two stroke oil (red in colour) read the dle manual for oil mixes in their engines but we ALWAYS use a 40:1 petrol/oil mix ! the knack of keeping the engine cool is to have a bigger opening at the back of the engine cowl than the opening at the front ! because the hot air expands roughly 3 to 1 so a bigger opening at the back / bottom of the cowl will allow this expanding hot air to flow out and cool air in over the cylinder head ! check the 3 photos @ 9:42 to 9:49 ive opened up the holes it the exhaust to allow the hot air escape from the top of the cowl, also the pic @ 9:51 showing the cut out under the cowl to keep her cool ! some engines do need a cowl / ducting around the cylinder head but these models dont need it, ive never overheated an engine in a cowl yet, check out part two of deano flying her here - kzfaq.info/get/bejne/nK2Krad9r7ndqJc.html - brilliant model ! hope you get on ok with yours - have fun - ps - the oleo legs that come with the kit are f*^%$£g useless as they are very soft ally and bend easy on hard landings so be carefull !

@astroworld744 5 жыл бұрын

@@tbobborap1 ah very good information and thank you so much for taking the time to reply to me so quick really appreciate that thank you again

@tbobborap1 5 жыл бұрын

thanks paul, no probs m8 - happy landings

@skydejavu5617 5 жыл бұрын

Is that electronic retract?

@tbobborap1 5 жыл бұрын

Yes they are eflite electric retracts sky

@darrelc5411 4 жыл бұрын

What prop are you using and what do you suggest as a good prop for this engine/plane?

@tbobborap1 4 жыл бұрын

@darrel c

@786free1 3 жыл бұрын

Nice, grrat flying.What size model is that?

@tbobborap1 3 жыл бұрын

all in the video description

@bobsmith2177 5 жыл бұрын

Hi Pete, do you have plugs for the wing connections? Thought I saw a red plug in one of the photos on the fuselage? If so were did you buy them. Also are you running a 16x8 classic series master airscrew prop? Thanks matey

@tbobborap1 5 жыл бұрын

hi bob, the plugs are brilliant and save so much time - check them out here on the global rc website - www.gashanger.com/index.php/servo-extension-leads-accessories/kuza-servo-extension-multiplug-3-wire these are 3 way (ailerons, retracts, flaps) he (paul) also sells the two way plugs, they are not cheap (you need two sets - one for each wing) but do make your life so easy ! ive bought another pair for my h9 p-47 im building ! dont worry about them falling out as deano uses them on his 3d models and has never had one fail under hi G loading ! check out our second video of the mussy flying if you like then go to the photos at the end and youll see my set up and close up pics of the plugs etc - hope all this helps bob - a piece of advice - the oleos that come with the kit are crap soft alloy so any hard landings will bent the tubes and the retracts will not go back up in the wing so be carefull or throw them away and fit stronger oleos ! let me know how she flies etc - regards pete kzfaq.info/get/bejne/nK2Krad9r7ndqJc.html

@tbobborap1 5 жыл бұрын

yes bob im using the classic round tip (its quieter) as the K series screams and is too noisy for our club site ! I think the K series might perform a little better from my past glow motor experience,

@bobsmith2177 5 жыл бұрын

tbobborap1 thanks Pete that’s great I’m definitely going to get a pair. I’m building the p47 so got the upgrade oleos. I’m putting a dle 20 up front aswell. Many thanks for your help buddy Regards Bob

@tbobborap1 5 жыл бұрын

bob ive also answered your earlier question from last month - hope it all helps m8 - pete

@tbobborap1 5 жыл бұрын

thanks, let me know how she flies bob

@chadstuart9923 3 жыл бұрын

My father is building one very similar in size. What engine would you recommend. Hoping for something that looks like the real deal.

@tbobborap1 3 жыл бұрын

same as in the video chad

@landonxc 4 жыл бұрын

I’m choosing between a DLE 30 and OS FS200S engines. If you were to choose one which would it be?

@tbobborap1 4 жыл бұрын

a dle 20cc petrol, the dle 30 is too much power and youll need tail weight this will up the wing loading so she wont fly nice and will be fast to land and wont be as manoeuvrable as my set up ! not sure about the os but again a heavy engine and not as much power as a petrol !

@landonxc 4 жыл бұрын

tbobborap1 Thanks for the reply. I guess I should have stated that this is for the Hanger 9 P-51 150 size model w the 80 inch wingspan. It’s already got the OS installed but I’m wondering if I should buy it w/o the motor considering the prices of glow fuel at the moment. I’m buying it 90% complete w just a few minor things left to finish up.

@Isegawa2001 4 жыл бұрын

Hey man. Do you think that bird could fly with a 15 cc FS-90? I've been looking to put my engine to use, but haven't found a good model. If you have time to reply, thanks.

@tbobborap1 4 жыл бұрын

hi, yes you could (preferably an os engine) but it wont be as powerfull as a petrol engine so be carefull

@Isegawa2001 4 жыл бұрын

@@tbobborap1 yep, it's an OS engine! That's great, man. Is there a link to buy it?

@claudiomedalha8567 5 жыл бұрын

👏👏👏👏👏

@bobsmith2177 5 жыл бұрын

I can’t decide hanger nine p51 or p47 help!!! Great vid as usual Pete and perfect flying as usual Deano.. What one fly’s best??

@svenk.9117 5 жыл бұрын

I would choose the Mustang, sehr is cheaper and more beautifull

@tbobborap1 5 жыл бұрын

hi bob, sorry for late reply (I see you've bought the mustang) I used to fly the original h9 p-47 and I can tell you the mustang flies almost identically as in very light wing loading makes it easy for high speed aerobatics and reasonably tight turns with out flicking out on you, very easy to take off but both models best trait is they are so bloody easy to land on full flaps that it makes the whole flying experience so much fun because your not dreading the landings ! (im not sponsored by h9) so im not bigging them up for any kind of gain but they are both brilliant first time warbirds to start flying bob, the retracts oleos are crap (I explained in the other message you sent me) try and replace them with stronger ones or never land her hard as they bend easy - remember to keep your C OF G to the forward measurement they give you and she will fly awesome - good luck and let me know how it goes - pete,

@robertkibler4662 4 жыл бұрын

@@tbobborap1What retracts oleos do recommend ?

@muskokamike127 4 жыл бұрын

they aren't merlins but I do love the sound of nitro engines over electric.

@tbobborap1 4 жыл бұрын

thanks mike

@muskokamike127 4 жыл бұрын

@@tbobborap1 brings back memories in the 70's when it cost over $2500 to get into flying and I learned about it at the local flying fields......

@luisotavio6398 4 жыл бұрын

Parabéns pelo avião, lindo lindo. Queria saber se nesse avião cabe um motor 25cc 4t???

@SuperHD1968 4 жыл бұрын

Excellent flying.. whats your CG in this set up.? im building the same plane

@tbobborap1 4 жыл бұрын

at the forward measurement they give you in manual - flies like a dream and lands perfectly

@SuperHD1968 4 жыл бұрын

@@tbobborap1 thanks for answer greetings from texas usa

@robertbaker50 2 жыл бұрын

Shit I definitely buying one of these next. 20cc all I need, 60cc may be way overboard for a weekend flyer.

@tbobborap1 2 жыл бұрын

shes a great little flyer, and so is the hangar 9 P-47 rob - check her out here - kzfaq.info/get/bejne/qdNnlqWBxsmsgY0.html

@tbobborap1 2 жыл бұрын

here she is again rob - kzfaq.info/get/bejne/nK2Krad9r7ndqJc.html

@robertbaker50 2 жыл бұрын

@@tbobborap1 the P-47 looks a little to bulky for me. I don't mind em big but rather a sleeker version plane like the mustang. Actually after viewing the video and not the image of the plane it doesn't look as bulky as I thought.

@robertbaker50 2 жыл бұрын

@@tbobborap1 I'm really leaning towards the Krill 39% 2.8m Laser Z-2300 MK2 150-170cc ARF, KK Racer Red

@Perry_Wolf 5 жыл бұрын

I'm drooling over this one. Just bought the Hangar 9 Carbon Cub, still in the process of building it. Nice quality kits. Would like to know more, were you using a gyro stabilizer or is that thing just that locked in?! Looks like it's flying on rails! Excellent flying buy the way!

@tbobborap1 5 жыл бұрын

thanks perry, absolutely no gyros - just deanos thumbs ! awesome little model

@robertkibler4662 4 жыл бұрын

I like scale war birds, so if I was to go with a four blade prop on the DLE 20cc AR, what size prop would you recommend, company and aluminum spinner? Would there be an issue with the DLE spinning a four bladed prop?

@tbobborap1 4 жыл бұрын

I wouldnt waste your time as it would smother the motor and wouldnt get enough rpm to pull it along the floor - anyway you cant see it when its running so whats the point ?

@robertkibler4662 4 жыл бұрын

@@tbobborap1 Thank you, another question, what aluminum engine mounts did you use? I notice they are not the stock mounts that come with the kit.

@don0219 4 жыл бұрын

nice flying, what prop size is on it?

@tbobborap1 4 жыл бұрын

cheers, its in the video description

@don0219 4 жыл бұрын

@@tbobborap1 oooppps sorry, i focused on the flying itself. thanks

@tbobborap1 4 жыл бұрын

thats ok mark, i generally try to put info on my videos description box but most people are to lazy to look !

@doyman 5 жыл бұрын

Did you have to trim your spinner to get that prop to fit? Its looking like I need to do that on mine with the same prop.

@tbobborap1 5 жыл бұрын

I dont recall trimming it but its not a problem if you have to

@stevethomas-cc5lz 4 жыл бұрын

im trying to find part number for rectracts or what size are they ?

@tbobborap1 4 жыл бұрын

me too

@rbadillomac 4 жыл бұрын

Wath CG use on that setup

@tbobborap1 4 жыл бұрын

by the book

@davidharnes3248 5 жыл бұрын

15×8 xoar prop for dle20

@tbobborap1 5 жыл бұрын

I use a 16x8 master airscrew on all my dle 20`s

@IbnAir23 3 жыл бұрын

No retracts on tail wheel. Hanger 9 that’s CHEAP

@tbobborap1 3 жыл бұрын

dont need one ali - just more to go wrong - then you loose your rudder on the landing if the wheel doesn't come down !

@don0219 4 жыл бұрын

hi there, what are the wheels diameter? 8:49

@tbobborap1 4 жыл бұрын

hi mark, they are 95mm or 3-3/4 inch dia

@don0219 4 жыл бұрын

tbobborap1 i have 4", do you think they will fit the wheel well?

@tbobborap1 4 жыл бұрын

@@don0219 no because its tight as it is and if you have a bouncy take of and bend them slightly they wont fit in the wheel wells when they go up !

@don0219 4 жыл бұрын

tbobborap1 ok thanks a lot, i think i have to buy 3 3/4 inches.

@don0219 4 жыл бұрын

tbobborap1 one last question, i need the leng of the strut, im looking at the 161mm length. will it be the correct length

@BIGGBULLxxx 5 жыл бұрын

That airplane is fast as heck and it sounds good, but I'm gonna have to unsubscribe and stop watching rc airplane videos.

@tbobborap1 5 жыл бұрын

lol - dont unsubscribe m8 - get rid of the wife / girlfriend and buy more toys

@BIGGBULLxxx 5 жыл бұрын

@@tbobborap1 ...That's a dream to come true 😇

@justanotherguy469 5 жыл бұрын

I started watching them back in November and now I can't stop. I bought a Stuka Dive Bomber from Tower Hobbies and outfitted her with the Bordakone 1.3 cannons and am waiting on a full scale cockpit from Scale Cockpits. I am not even finished with the build yet and I just bought a Beechcraft G58 from RC Aerodyne. and thirsting for an A-10 Warthogg 1/7 scale with twin Jetcat P160 RXi-B turbines and I have not even flown yet. Right now they will just be cool to scale out and look at in my living room. I'm Hooked, No more woman!!!

@BIGGBULLxxx 5 жыл бұрын

@@justanotherguy469 ...And don't forget to get a 1/4th scale carf models p47 thunderbolt with the moki 250cc motor 🤪

@tbobborap1 5 жыл бұрын

way to go - lol

@khalid-7653 5 жыл бұрын

Someone mention horaizon hobby to see the power for dle 20 c.c best than the trash evolution engine 🤢

@tbobborap1 5 жыл бұрын

dle is a great little engine khalid

@khalid-7653 5 жыл бұрын

@@tbobborap1 I have 6 dle engine all of them working great

@tbobborap1 5 жыл бұрын

brilliant

@goodboyringo9716 11 күн бұрын

PUT A BETTER PROP ON IT

@tbobborap1 10 күн бұрын

@@goodboyringo9716🤣🤣 the prop is just fine ringo 👍

@goodboyringo9716 10 күн бұрын

@@tbobborap1 ... It's plastic and it bends while flying . A wood prop is what you need. stop being so cheap !

@tbobborap1 7 күн бұрын

you seriously think your going to notice the difference between those two props after seeing it fly on here ringo 🤣🤣 the reason i use master airscrews on virtually every glow / petrol model i fly is that when it takes off / lands and tips over the prop doesent splinter like those expensive wooden ones do that you use - so its cheaper and i just go fly straight away ! cheers ringo 🤣😂

@goodboyringo9716 6 күн бұрын

@@tbobborap1 ... I guess you have a good reason to used them but your plane shouldn't be tipping on take off or landing not good for your plane, one day it could get damaged really bad . Have great year flying.

@tbobborap1 6 күн бұрын

@@goodboyringo9716 🤣🤣🤣 ive used master airscrew props for 41 yrs now (i think) and never lost a model yet ringo ! Its rare that my models tip up but when they do my props dont splinter - unlike your wooden ones ringo. But thanks for the advice and i wont be changing to wood any time soon ringo 🤣🤣🤣