Hank’s Squarebody Is FAR WORSE Than We Imagined…

Рет қаралды 15,394

Ай бұрын

Our friend Hank from Haniltonville Farm dropped off his squarebody Chevy that he has been building with his granddaughters for some paint and body work, but this thing is FAR worse than any of us imagined…
In this video, we’re going to show you everything that needs to be done to this thing before we can even START thinking about paint work… is it too much? Can we fix it? I guess time will tell…

Пікірлер: 51

@Chuckiewashere 13 күн бұрын

Come On Hank, This truck would look awesome as a stepside

@icanseymour Күн бұрын

Bob from Shell's Paint and Body?? That dude is super cool! Delivered paint stuff to him for a while when I worked with CarQuest in Marianna.

@CoopsHouse Күн бұрын

@@icanseymour yessir! Bob and I go WAY back!

@HamiltonvilleFarm Ай бұрын

That looks MINT to me!!!😂

@CoopsHouse Ай бұрын

If you close your eyes and don’t look at it……. 😂

@CoopsHouse 19 сағат бұрын

@@jonhbaker1511 what did I do?

@GarnettM 5 күн бұрын

These old trucks were bad for Fuel tank venting too , Check the cap remove it see if problem goes away might be creating a vacuum so gas can`t be drawn to motor .

@CoopsHouse 5 күн бұрын

Yessir. Vent tube was in good shape and not clogged. Once we replaced the carb, it ran a million times better

@chuckclark9464 Ай бұрын

Well, you can take the floorboards out of both sides and get the girls to start and stop like the Flintstones lol

@CoopsHouse Ай бұрын

😂😂😂

@larrytucker2938 Ай бұрын

Somebody needs to tell Hank that the truck is beat. That thing smokes like a cheap cigar and almost all the jacked up 4X4's have drivetrain problems.

@brianpulstsr8680 23 күн бұрын

It definitely need front diff checked since rear was full of water.

@douggrove762 Ай бұрын

I may know were there is a hole truck.

@thomass2055 Ай бұрын

I'm just saying this from experience edelbrock doesn't run right on Chevy I went with a holley 750 double pumper 4 barrel. My truck runs as smooth as glass.

@CoopsHouse Ай бұрын

That’s about all I run on any of my stuff. Don’t have much experience with edelbrock aside from intakes

@russmurphy7062 Ай бұрын

I hate to break this but Edel-junk doesn't work AT ALL. The carbs are a new version of a Thermoquad.

@brianpulstsr8680 23 күн бұрын

Looks like those are bolt-in bed sides. Have you checked into aftermarket replacements? Looks like you could get both sides for about a grand at Summit Racing. How much does Hank love his grand daughters?

@CoopsHouse 23 күн бұрын

Yessir, I believe they’re a combination bolt in/weld in. But the bracing and the floor are shot as well.

@danielvanmourik Ай бұрын

beuatiful skoolies on that place

@CoopsHouse Ай бұрын

Yes sir. Great bunch that runs the place too!

@markbusey1593 Ай бұрын

Didn't realize he bought such a rust bucket for the girls. Evidently he didn't look it over very well. Should just yank the small block out and find a better looking square body. I'm sure there are many out there cheaper than he's fixing to spend on repairs on this one!

@CoopsHouse Ай бұрын

I’m not sure he realized it either. I’ve built several of these so I’m familiar with what to look for on them. We’ll get it back like it needs to be though.

@SunsetAcresFarm Ай бұрын

Nice! You guys do any side by side work? 😅

@CoopsHouse Ай бұрын

We haven’t but I’m sure we could lol

@antonejones9200 Ай бұрын

Hey bro are used to have a truck like that with the old side bed and everything but I got rid of it it’s not here but my town has them here in Merced California I can go to the junkyard here and check and see and see if they have it or have wondered if you could get well you’re gonna have to come and get it

@CoopsHouse Ай бұрын

Thanks man. That would be a little too far for us lol

@jeffhiatt4000 Ай бұрын

Maybe look for a new cab.

@CoopsHouse Ай бұрын

I could find one. Just not in the cards at the moment. Once I get the floors and rockers in, it’ll be good to go

@chuckclark9464 Ай бұрын

I keep asking you what that car is in the by the front door. It looks like a nova Pontiac. I used to have one and I’m just curious about what it is. I don’t know why you won’t answer me unless you’re like a lot of other people you only answer if you’re part of Patreon, I don’t know.

@CoopsHouse Ай бұрын

I’ve answered every time. I reply to every comment on our videos 😅😅😅 it’s a 69 nova lol

@chuckclark9464 Ай бұрын

@@CoopsHouse thank you I’ve never seen the reply. I apologize if you sent it because I had the same body type. Mine was a Ventura 2.

@CoopsHouse Ай бұрын

@@chuckclark9464that’s alright. I lose comments on here all the time. Lol. But that’s awesome! Love that body style

@MattChristensen-ky4gr Ай бұрын

Electric pump an regulator. Runs way better than those old manuals

@CoopsHouse Ай бұрын

Sure is a pain when those electric pumps wanna start acting up though 😂

@MattChristensen-ky4gr Ай бұрын

In tank tbi works great cep to just make access hole make a fancy diamond plate cover

@larrybailey43 Ай бұрын

Sure like that color on the Chevelle

@CoopsHouse Ай бұрын

Thanks man!

@michael_3985 11 күн бұрын

In my day we that truck a rust bucket. Lol

@CoopsHouse 11 күн бұрын

It’s definitely that 😂

@tonypaul2987 Ай бұрын

I see the problem

@CoopsHouse Ай бұрын

Which one? 😂😂😂

@cliokid49 Ай бұрын

Where is your shop located ?

@CoopsHouse Ай бұрын

Florida Panhandle, around Panama City

@dancurrier6421 Ай бұрын

hello any updates on Hanks truck for his granddaughters looks like it's in bad shape

@CoopsHouse Ай бұрын

@@dancurrier6421 it’s definitely rough. We’re waiting for some parts to come in so we can really get to work on it.

@dancurrier6421 Ай бұрын

why not updates been over 6 days

@CoopsHouse Ай бұрын

This stuff takes a lot of time, and we’ve been waiting for parts.

@JMRRebuilders Ай бұрын

that thing is uglier than the guy who bought it. well at least he took it to the right place ot get it sorted.

@CoopsHouse Ай бұрын

We gonna make it happen 🤙🏻

@douggrove762 Ай бұрын

It's a piece of junk.

@CoopsHouse Ай бұрын

It won’t be when it leaves here