Hanover Deric+ / Eric+ (How To Upload Destination File, No Keylo)

Рет қаралды 8,216

4 жыл бұрын

This video shows how to upload your own destinations to a Hanover Deric+ or Eric+ controller quickly and without the Keylo and Base Station.
USB / R232 cables can be purchased on eBay for around £5
Hanover Helen 3 Download:
wmbusphotos.com/forum/index.ph...
Feel free to request any other Hanover tutorials in the description. Thanks.

Пікірлер: 44

@blyatdimitiri3708 3 жыл бұрын

Great video mate - it really helps me to upload all data without keylo (which could be very difficult to get one now!)

@alxtransportvideos601 4 жыл бұрын

Great video, if only I had found a video this simple years ago when I got mine. I dribbled through manuals before finding out how to do this...

@NC-002 4 жыл бұрын

Ruvaneth Unys Photography & Video glad you found it simple! There wasn’t many videos of how to do it clearly on KZfaq so I thought make something clear and simple for new time Hanover users

@Re_Mecs 3 жыл бұрын

I work for Hanover and always nice to see them in the wild and not in a bus :)

@NC-002 3 жыл бұрын

Thanks buddy! Plenty of us keep a few for ourselves! Great fun to experiment with!

@Re_Mecs 3 жыл бұрын

@@NC-002 yeh they seem fun...someones made a mario slideshow on one recently...working hard as always ha

@ciaranbird3373 4 жыл бұрын

Great video, very informative :)

@NC-002 4 жыл бұрын

Thanks mate!

@JordanElliott11065 3 жыл бұрын

Great video. I'm from New Zealand

@NC-002 3 жыл бұрын

Thank you!

@paulfin100 Жыл бұрын

Hello, fantastic videos on the Hanover Display. Just subbed! I have an Eric + and have read the manuals inside out, I can not for the life of me get the display upon power up to dislay the last used destination. What am I missing?

@user-wo2tc6xs4h Жыл бұрын

Good day. Very good video. I would like to ask you for help. I found a thread on the Internet about the software you are talking about, but all the links there have not worked for a long time. Could you help me get this program?

@ThatBusEnthusiastOlli 4 жыл бұрын

Hi there, very helpful but I have one question, After pressing 'Load data' on the controller do you have to press the 'send output file' button on the laptop? Or does it automatically start transferring over after you press 'Load data' on the controller?

@NC-002 4 жыл бұрын

Hi, once you press Load Data, it’ll transfer it automatically.

@ThatBusEnthusiastOlli 4 жыл бұрын

@@NC-002 Ah ok, Cheers

@raduvalcz5963 10 ай бұрын

Is there any tutorial how to upload with key-lo on deric+ ???

@alexfung2159 3 жыл бұрын

If you only have a Deric+ controller in hand (from a retired bus) and without any .BIN file, can you export the DB back into Helen for editing i.e. the reverse of what you'd be doing?

@NC-002 3 жыл бұрын

Good question, I’m not entirely sure, but surely there must be some way to

@benclabburn6647 3 жыл бұрын

Any ideas what the deric and the sign draw in terms of power? I know they’re both 24v but how many amps?

@NC-002 3 жыл бұрын

I believe the minimum they can have is 18V but they’re usually best with 24V, can’t say I know much about electricity but I think the PSU says 2 Amps

@aumdallymohammadalfaad7094 Жыл бұрын

Hello. Can you help me to send data to Hanover DRS?

@linogomes10 6 ай бұрын

Hello, Great video. I need some help with it, could you please help me with assembly connections? I have the dots panels and derick+, but not sure how power it on.

@linogomes10 6 ай бұрын

power on the 3 pin plug, left is positive middle is ground, on derik, same for panel, pos and ground, and com port is other 2 pin plug. important at least 19vdc power required. just assembled mine today

@linogomes10 6 ай бұрын

kzfaq.info/get/bejne/esCUeK6KqreXo3U.html

@jurgenparllaku2328 Жыл бұрын

cant download the software, the link up there doesnt have any download link, can you help us?

@lockly6258 10 ай бұрын

HI, link is dead, please reload link of helen installer! thanks in advance

@madjock7784 3 жыл бұрын

Where can you get the software for them using a DG3 controller

@NC-002 3 жыл бұрын

DG3’s use the same software as the Deric/Eric,

@madjock7784 3 жыл бұрын

@@NC-002 I was meaning where can you find the software

@NC-002 3 жыл бұрын

@@madjock7784 if you have Facebook, there’s a group I run called Destination Display group, there’s download links for Hanover software in there. If not try Googling it, there’s a forum somewhere with a download for an older version

@madjock7784 3 жыл бұрын

@@NC-002 applied to it

@djspykeofficial Жыл бұрын

What driver do you have for the USB/Serial cable?

@NC-002 Жыл бұрын

If you use it with your computer whilst on the internet, it should download them automatically

@djspykeofficial Жыл бұрын

@@NC-002 it’s showing on my computer as a CH340 driver

@samplenames793 4 жыл бұрын

where can i get a controller and display? wanted one for ages

@NC-002 4 жыл бұрын

eBay is the easiest but they're usually expensive, just approach an operator or ask around like I did.

@alxtransportvideos601 4 жыл бұрын

Try some preservation groups, they might sell equipment to help raise funds! I got a full set of hanover flip blinds cheaply through a local group!

@NC-002 4 жыл бұрын

Ruvaneth Unys Photography & Video exactly! I got my flip dots for free just because of social connections, and for the same reason I got a SIGNIFICANT discount on my LED!

@alxtransportvideos601 4 жыл бұрын

@@NC-002 Agreed, knowing the right people always help. I have about 5 sets of blinds and a working (manual) blind box I got free from multiple sources. Just ask around, worst anyone can say is no!

@NC-002 4 жыл бұрын

Ruvaneth Unys Photography & Video wow! Would love to see some photos of them sometime! You got Twitter or anything?