Harbor Freight 110LB Pressurized Abrasive Blaster REVIEW!

Рет қаралды 112,227

Күн бұрын

Tools I use:
Milwaukee 3/8" M12 Impact (bare tool) - amzn.to/3Etyxyt
Milwaukee 3/8" m12 Impact (kit) - amzn.to/2ZuUDBe
Milwaukee 3/8" Ratchet - amzn.to/3Bp4ru3
Milwaukee 1/2" Impact - amzn.to/3GtNUIU
Milwaukee Flashlight - amzn.to/3EtzeI5
Milwaukee Fuel Combo Kit - amzn.to/3w0ZVRq
I am in no way sponsored by Milwaukee, I am just a huge fan of their tools. It really helps this channel by purchasing through the product links I provide, thank you.
In this video I sand blast for the first time with the central pneumatic 110lb abrasive sand blaster from Harbor Freight. I hope you guys enjoy and make sure to subscribe!

Пікірлер: 72

@jaimechimie 3 жыл бұрын

Thanks for the review and showing the compressor that you use. It was very helpful to see a real world user and the results that they were able to achieve.

@Arthurian. Жыл бұрын

I'm 3 minutes in and you're going over everything so thoroughly. Much appreciated

@Carnivore_Resident 2 жыл бұрын

Just one recommendation for anyone that stops and read this. Never or least avoid blast with the fuel tank specially with gasoline since is very flammable, sandblasting creates sparks when the media hits metal so becareful.

@1heart7seas1moon 2 жыл бұрын

Thanks

@jacobmiller6375 Жыл бұрын

Bruh you wild

@danielfirsdon3571 Жыл бұрын

NACE published an article about this year's ago. The air propelling the sand is fresh air creating a pocket of fresh air in which gasoline vapors are not present. Before you say what if the spark exits this pocket of fresh air, the velocity of the air rapidly cools any spark below the temperature it could ignite the vapor.

@scottbeilby2182 2 жыл бұрын

Good work walking us through this..thanks for sharing 👍

@richardpoe2370 Жыл бұрын

Hey for the first time you ever sandblasted bud you did a good job I used to have to sandblast on a job at Delta Delta airport terminal in Atlanta Georgia 500 and something pieces and I had to blast them with a big industrial Titan sandblaster you did good have a blessed day

@cardo1111 Жыл бұрын

Nice shop and hands-on review 👍🏽

@samuelchancock 8 ай бұрын

Bro, hilarious, that ya started out, being brutally honest. Hungover 😂. Ya got my subscription and likes, bud. Coming to ya from Houston....

@NickMango Жыл бұрын

I have about 30 SF of steel plate to clean and I was considering getting this, but I don't know. I think for your application its a must because of all the bolts and crevices, but for me I think a large grinder like 7" and a bunch of flapper wheels should do it. Thanks a lot for the video. Definitely helped me out.

@Anth4044 Жыл бұрын

Nice video thank you so much for sharing this I'm going to purchase me this 👍👍👍

@edwinhidrogo7717 Жыл бұрын

Your hilarious man, hung over as hell got me😂

@Teknakill Жыл бұрын

SUPER EASY TIP....On flat surfaces, use wire brushes on a drill or grinding wheel, way faster and saves media. Smaller spot sand blasters are for tight areas where you can't reach.

@remingtongoff73 2 жыл бұрын

I had the same issue with mine. I went with a stainless steel ball valve as an upgrade I also noticed I went through the ceramic tips fairly quick also.

@bruceb6262 Жыл бұрын

The most important thing with these blasters is too make sure your sand is dry, or it wont flow right. with dry sand you can lower your pressure so smaller compressors can keep up. Also you can use playground sand from HD or lowes just sift it when you pour it in, make sure its dry and wear a respirator blast away.

@redneckswitwheels Жыл бұрын

Never ever use playground sand it has silca

@GregoryJohnston77 Жыл бұрын

That's exactly what i use and do, also switch to the deadmans handle.

@Arthurian. Жыл бұрын

@@redneckswitwheels Meh, when you live by a nuke plant, the motor city & quarry putting silica into the air every single day, it's all relative.

@bamslife2812 Жыл бұрын

That's a killer shop you have

@douglasphillips24 2 жыл бұрын

Definitely need a big air compressor for this blaster & get a better mixing valve & tip cause I had to shake the blaster while blasting. Also my air compressor couldn't keep up . For the $ it's definitely worth it & a 1/2 face respirator is highly recommended.

@EEZYEEEE 7 күн бұрын

What did you treat the blasted areas with afterwards to prevent rust?

@richardcurtis2688 2 жыл бұрын

Turn handle around! It's backwards for packing purposes

@samuelchancock 8 ай бұрын

Hey, are you gonna do a video with the POR 15? Also, how do ya like it?

@adamjayandtheuglycrew3079 2 жыл бұрын

I had the same issue with the valve wearing through. I bout a different styled valve, I believe it was called a deadman’s valve. Not 100% sure on that name being the correct name for it. But that deadman’s valve didn’t ever wear through like that valve that was included with the blaster.

@davejalenderki Жыл бұрын

A welding hood with clear cheap replaceable lenses would be a better shield. Thanks for the video.

@robert5 Жыл бұрын

The valve needs to be all the way open or all the way closed. If you only partially open it the sand will eat it up, like you had happen.

@johnedie9544 2 жыл бұрын

The system sucks kept clogging using a 19 scfm air compressor . I finally updated to Ameriblaster update works fine now .You pay for what you get .

@claytonwhited8242 2 жыл бұрын

Is it supposed to be small sections because im tryin to do a car and its really small barley spraying psi

@danillovv6 Жыл бұрын

Hey buddy, I have a question, what is the average pressure work to keep the blaster?

@drainmonkeys385 3 жыл бұрын

Well... I’m in the same boat ... never did it... well maybe I held a blast gun once when I was a kid and my uncle was sandblasting something... eh... that means I’m clueless... but will be buying a kit.. either harbor freight or northern tool ... I got some things I want to restore

@AlxDv 3 ай бұрын

“I’m hungover as hell..” take my thumbs up.

@johngreen8179 3 ай бұрын

How many bags of media did you go through?

@WOZCINEMA 3 ай бұрын

What’s the smallest air compressor that will work with this blaster?

@abrammatthew756 Жыл бұрын

Can you use this in a sand blastingcabinet

@user-yy4xq5bv8x 7 күн бұрын

Superficial rusty 0k , heavy rust Work ?Wisconsin bad rusty truck

@tylersimpson8115 Жыл бұрын

What air compressor did you use

@Realest1979 Жыл бұрын

Glass bead and Ameriblaster tip/hose

@samyish Жыл бұрын

Uhtred of Bebbanburg if he was a mechanic.

@thelifeofsenorford2822 2 ай бұрын

clicked on the video as soon as i heard “im hungover as hell”

@cloudrhezii 3 жыл бұрын

How do you think this will do against getting deep in rust pits ?

@j-bobsgarage7535 3 жыл бұрын

Should do just fine

@brollin2flybrollin2fly49 Жыл бұрын

That good

@jonathanritter7364 6 ай бұрын

How long did it take you to blast this?

@shadesCAN 2 жыл бұрын

Ditch the valve at your tip. Your going to be constantly washing the guts out of them. I use to use a industrial blaster that could turn them brass valve bodies to dust in just a few minutes using silica sand.

@METALMUNCHERS77 Жыл бұрын

How many bag to fill

@richardsmith9872 2 жыл бұрын

on your next hood cut sheets of plastic and tape them on the hood and as it gets foggy you tear it off and you have a new one! thats how pros do it.

@trevorcurl4756 2 жыл бұрын

The bottle says do not use sand as blasting media. Why is that? Or is the media you used a okay media to use?

@ripntearslayer9101 2 жыл бұрын

I'm sure it's talking playground sand or general purpose sand, the grits are to irregular. Sands that are made as a blast media are good, since they're standard grit sized granules

@scprotz8102 2 жыл бұрын

Most likely they don't want you to use a silica-based sand. When used as a blasting media, it shatters the sand, creating very fine silica dust which you breath in and can cause silicosis. Not everyone will have a high-quality mask (or even use one) and will breath in some of the particles.

@tbirdboy 3 жыл бұрын

I have a question. . I have a 110lb pot. I also picked up 50lb bag of Black Diamond fine grit. Should I dump the whole bag in or is less better for flow? I'm running a Speedaire 7.5 hp/25 cfm. Thanks.

@j-bobsgarage7535 3 жыл бұрын

You can dump it all in, it doesn't matter how full it is because the valve on the bottom of the tank is the media adjustment.

@markcobb6561 Жыл бұрын

You can fill your tank to 75% capacity for normal weather conditions. When the humidity is over 80%, fill to 50% capacity to avoid clogging.

@Tampainian 2 жыл бұрын

How long did it take for you to do everything?

@j-bobsgarage7535 2 жыл бұрын

Around an hour if I remember right

@Tampainian 2 жыл бұрын

@@j-bobsgarage7535 Awesome, just got a used one for $25. Has a few leaks but easy to fix.

@chrisgonzalez2980 2 жыл бұрын

Where did u get ur sand at ?

@norris.7670 Жыл бұрын

👍

@timpayne3401 2 жыл бұрын

you look like the dude from Yellowstone

@j-bobsgarage7535 2 жыл бұрын

the amount of times I get that you wouldn't believe. A good card to have with the ladies haha

@mpyoung33 2 жыл бұрын

I was thinking where do I know this guy from and your comment was exactly what I was thinking.

@doomman700 7 ай бұрын

Open the valve all the way up, or you eat up valves.

@dubledee777 4 ай бұрын

Wet ur clear up more lol. Full fan more fluid

@NeverEnoughPyro40 Жыл бұрын

You probably shouldn’t be assembling an operating equipment when you are hung over! The reason you blew through the side of the valve was because you were using it to control the flow, It is stated in the instructions that the ball valve at your nozzle should be wide-open and you are to control the flow at the bottom of the pot or you will blow a hole through the side of your valve! Harbor freight’s tools are cheap enough they don’t need people making them look even worse because they are too lazy to read the instructions!

@GregoryJohnston77 Жыл бұрын

Get a dead mans handle, these valves they come with ALL do this and fail then people leave bad reviews on the blaster.

@PaulPassarelli 3 жыл бұрын

Do people really not understand that the valve at the nozzle is *NOT* a throttle, it is an ON/OFF switch. The replacement valve will "blow-out" in another bag if it's used to control the flow! Next time RTFM!