Harbor freight bed crane modified with electric winch welded to hitch receiver...

No video

Harbor freight bed crane modified with electric winch welded to hitch receiver...

Рет қаралды 19,805

2 жыл бұрын

I did this to make swapping my 1983 chevy k10 over to a 5.3 easier due to uneven terrain and the lift on the truck makes it difficult to swap with a regular engine hoist!
UPDATE!!! the video attached is that LS 5.3 in my squarebody k10 running
UPDATE!!! I will be swapping a 98 chevy blazer 4.3 liter engine with this crane.. once completed I will be LS swapping my 1988 chevy s10 with the same crane will be posting videos once the job is started...
SUBSCRIBE FOR MORE!!!
SMASH THAT LIKE BUTTON!!!!

Пікірлер: 16

@markg3305 Жыл бұрын

I did something very similar except I used two pulleys to double back on to make the winches life easier 😅

@hankplays4563 Жыл бұрын

thats the heaviest load it will ever see i use it primarily to load beams onto my car trailer from the saw mill

@markg3305 Жыл бұрын

@@hankplays4563 that's exactly what I use it for! haha I wasn't trying to bash your design just sharing what I had to do because my winch kept thermal locking

@sammas7440 Жыл бұрын

Nice build, but I was nervous about the tongue weight limit.

@hankplays4563 Жыл бұрын

yeah that was over the weight of that hitch but it was only a test

@hankplays4563 Жыл бұрын

i primarily use it for loading lumber like 6x6's and logs onto my trailer... I will post a video of it being used on the trailer

@paradisewithmoto4196 2 жыл бұрын

W video

@stlpro2a386 5 ай бұрын

Hmmm...car suspension didn't appear to squat at all picking up that engine. That car should have squatted 4-6" at least. Super springs or was there a jack supporting car in some manner?

@hankplays4563 5 ай бұрын

its a volvo xc90 they are a beefy suv.. no jack no stands just the suv suspension

@anesthesiadreamin 2 жыл бұрын

Thanks for posting! Am I seeing it right, it looks like you bolted the mounting/fairlead plate to the winch, then welded the mounting plate to the crane? I don't know the advertised weight rating on the hypertough winch, but I have noticed with my HF 2500# winch it struggles with 400-500 lb loads, even with a short and large power cable and fresh battery. Do you think all these winch manufacturers are over-rating their power?

@hankplays4563 2 жыл бұрын

oh yeah that winch is rated for 2500 lbs and is hooked directly to that cars brand new 800 cca battery and the car is running

@hankplays4563 2 жыл бұрын

i will tell you DONT TRUST THAT HAND WINCH

@tanglewood777 4 ай бұрын

these type winches are not meant for lifting only dragin so dangerous wot loks it if power goes it fall to ground

@hankplays4563 4 ай бұрын

weird its lifted like 4 engines and picks up logs and has never once released.. Huh i even had one of these winches bolted to my barn beam and it used to pick up my mowers NEVER have they ever dropped the loads attached.. OH and the jumper cable disconnected in that video at the end and the engine didnt drop weird.. HMMM weird

@tanglewood777 4 ай бұрын

@@hankplays4563 had one on crane moter burns out in months if liftin heavy stuff if weather dont kill moter first