Thanks, the pump was just something I had lying around. The maximum lift seems to be around 300-350 lbs., which is enough for my purposes.
@KEOHO19653 жыл бұрын
Can I ask, what is the square tubing diameter? On the 1000 lb. side. 2” or 2 1/2”?
@phineasj.whoopee33013 жыл бұрын
The larger tube is about 2-3/8" (60mm), the smaller (inner) tube is about 2" (50mm) both are about 1/8 (3mm) wall.
@KEOHO19653 жыл бұрын
Phineas J. Whoopee Thanks, I built my new crane, if you care to see it. kzfaq.info/get/bejne/npZ6kree2Zy-Y30.html I messed up, I should have put a photo of the new crane @ the beginning of the video. The completed crane is @ the end of the video.
@abrielonsurez40517 ай бұрын
Do you have the t5 hardwired to your truck battery? Toggle switch for controls?
@phineasj.whoopee33017 ай бұрын
I have a starter relay under the hood which connects to the battery and feeds a heavy gauge (welding cable) wire to the pump motor. A pair of 16 ga. wires connect the pushbutton switch to control the starter relay.
@abrielonsurez40517 ай бұрын
@@phineasj.whoopee3301 how many lifts do you get out of your battery before its hard to start your truck. Or dp you idle your truck while operating the crane?
@phineasj.whoopee33017 ай бұрын
@@abrielonsurez4051 I can fill the truck with large rounds (3/4+ cord) without affecting the ability to start the truck. I don't idle the truck.
@abrielonsurez40517 ай бұрын
@@phineasj.whoopee3301 thank you very much i have the same crane you have but mounted on the platform of my log splitter. I just ordered a T5 i found on ebay i would like to duplicate your system and save the back ache since all my wood pile is large rounds. Thank you very much for your help you have a very intelligent method.