@BruceLyeg Жыл бұрын
Nice job. You don’t need the collars, it stays down on its own once the duck is on the bead of the tire
@Ej8marv 10 ай бұрын
Your right. Thanks
@ya472 10 ай бұрын
If you welded on the nuts first, then drilled the hole, you could tap the hole to give more bite for the bolt.
@Ej8marv 10 ай бұрын
Oh dang didn’t think of this. Thanks
@melvis2017 4 ай бұрын
Great job and the good way to explain things 🇩🇰🙏👍
@martymcfly3986 10 ай бұрын
very creative, good job, thanks for sharing
@Ej8marv 10 ай бұрын
Thank you for watching.
@ya472 10 ай бұрын
Is there a specific reason why the duckbill is on the following side of the arm, rather than on the leading side? After all, the duckbill must travel counter-clockwise.
@Ej8marv 10 ай бұрын
To be honest I didn’t really think of this but I haven’t had any issues the way I have it set up. I’ve already changed like 2 sets of tires all around so I’m sure she gonna hold up for a good while.
@ya472 10 ай бұрын
@@Ej8marv This is why I ask, because from an operational point of view, I thought it odd to drag the duck than push it. It probably makes no difference to the duck, but it would be more intuitive to go counter-clockwise. Just a thought.
@Ej8marv 10 ай бұрын
@@ya472 your probably right. I would like to make a new and improved version in the future. I will definitely look into the way you describe it and try it out. Thank you
@joshuamcneal5515 8 ай бұрын
How much would you charge to make on of those
@Ej8marv 8 ай бұрын
Idk. I’m not a certified welder and metal is expensive right now.
@joshuamcneal5515 8 ай бұрын
@@Ej8marv if you will I’ll pay for one
@spiceian Жыл бұрын
Do you have a link for that part?
@Ej8marv Жыл бұрын
www.amazon.com/dp/B00LC4MLPK?ref_=cm_sw_r_apin_dp_TABNREJZQZVSZ4HP9G9B
@israelroque3921 5 ай бұрын
Can you give me a part number Or give me a name for the part....
Matt's Automotive Channel
Рет қаралды 4,5 М.
TSR Garage
Рет қаралды 64 М.
Shop Dog Fabrication
Рет қаралды 28 М.
DriftSanti
Рет қаралды 18 М.
Mad Ginger Customs
Рет қаралды 698 М.