4-6-22. Being a 120 lb. 5’-3’ woman this was the only way I could build this by myself, and it worked beautifully, building it on the floor and sliding it in and around the toolbox worked great! April 6, 2022 purchased. Helpful note: Just be careful to make sure the tiny overlap flange on the top rim of the toolbox overlaps the corners at each top of leg. If you forget to do this then simply loosen the bolts and pull the flange to sit on top and over the legs at the corners. It’s a beautiful box!

Forgot to thank OneArm Bandit for his great idea!!

By the way, my model was a newer model with more bolts, but still works the same.

Thanks good tip 😊

You got that right. Thank you NASA and Black & Decker for inventing battery-powered tools!

On sale for $179.99 right now

@@edwardtaylor2250 Thank you for the heads up.

Got mine for $170 a month or so ago and a week later it was 160 at a parking lot sale.

​@@durpydurp7497 Before Covid I was a regular at HF. I was on top of their promos. But at times it was frustrating, in a week to 9 days they could have 3 different prices on an item. I have most of what I need but if there is a good promo, well you can never have too many tools. LOL Stay safe, Joe Z

A magnetic tool bar. I was trying it to see if it would help me hold the bolts in giving me another free hand.

I think the "$199" model comes with the folding side table.

I just got one today with the membership can get it for 159 they have a 2 drawer that is pretty much same demetions that is 159

Unfortunately, since the higher tariffs on Chinese made stuff came into effect, all the prices are a little higher than they used to be. Still pretty good deals but definitely not as good as they were.

I bet he's right about the tariffs, but I got mine on Black Friday for $99.

Now "on sale" for $149.99 (6/2020). STILL not a bad deal, and bottom is now reinforced!

OK, so I figured it out. I was able to get one drawer out and see the piece that's supposed to slide up was not moving when the lid was opened on the left side. So, I turned the whole chest upside down on a card table with the lid open and leaving room for the spring loaded rods to go up or rather down with whole chest inverted. The lock lifted or rather dropped thanks to the force of gravity, and I was able to get the drawers open and out. And sure enough, there was a loose nut and washer. Incidentally to get the drawers out, you push the plastic locks on the drawer sliders one up and the other down. To reinstall the lock slider to the rod, I laid the chest on it's side, undid the 2 bolts that go through to the inside of the chest, then you can remove the rod, pull the slider all the way up, put the washer and thread the 8mm nut and tighten with a 8mm socket, universal and 1/4" ratchet. The locking slider was bent on top on mine, and there was not much threads sticking up, but there's another nut to adjust on the other side. Likely it being bent was the reason the nut fell off if it was ever attached or just barely attached. Anyway, adjusted the nut a little, bent the piece back, reattached. It works now.. And of course put thread locker on the bolts to not have to do it again. EVER hopefully. Ok so where was I. Really not liking the rubber detents. Hmmmm. Another day.

@@durpydurp7497 Thanks for posting a great followup to this video and sharing the solution:>)

@@jeffwiggins3351 So, as it turns out HF has 2 different lock setups on the drawers on this box. One is the rods, which we've been discussing, and other is rectangular metal tubes. That's what I see when I go to harbor freight. But I also see vids on you tube from years gone by with the box tubes. So what gives? Why are there 2? When did they switch over? I had mine shipped, so it came from a warehouse vs the store. BTW they won't ship the 5 drawer or I would have gotten it but they did ship this one, only 20 bucks, which they refunded due to my problem. So are they receiving 2 different kinds or did I just get old stock with a design that's since been updated? That would suck. BTW love love love my new tool box!

My jaw dropped when he said $100 🤣 i was like bro where???

@@p-teddy1342 Joe Biden

just wait until 2028

I did too but the manager made it right $84.00. The manager said if she can find the coupon she make it right.

@@kooncesphotography I paid the $107. My store had a posted notice so I figured it's still a good deal at $107.

Cool vid. I went through two boxes that were damaged before I I finally got one that wasn't damaged as bad. But for 89 bucks, you can't beat it.

and now they're $249 ;)

Always find the deal. It's what makes the world go round. Some people say it's residual angular momentum from the formation of the universe..blah blah blah. It's definitely finding the deals.