👇WeldTube Store👇 www.weldlife.com

Bob and Jody from tips & tricks would be the best duo ever.

I love watching Mr. Moffat...he is so knowledgeable! I always learn something!!

Great to see Bob again. He's the reason I got into welding. Awesome dude. Cheers fellas😎

Yay Bob is back! The dude is no-nonsense but knows his craft and I greatly respect that about him.

So happy to have seen Bob again. Wish he'd come up with his own channel.

Glad to see Bob again!!! He needs his own channel!

Great to see the one and only Bob back in action !!!

The man, mith, and legend Mr . Bob

I’ve seen a lot of heavy equipment done hard facing with the stick welder. That’s new to me seeing it done with tig.

Yeeaahh baby!! Bob definitely in da house! Love watching this master Craftsman weld!!

Only clicked because I saw bob.. reminds me of the original way the channel was

BOB! BOB! BOB! BOB! BOB! BOB! BOB! miss that old man

The Man, The Myth, The Legend...Mr. Moffat!

Bienvenido profesor moffatt. Gracias por esta clase. Siempre recomiendo este Canal a mis compañeros.

Always great when Bob pops in!

Good to see Bob again 👍

Mr. Moffat is back !! Yeehee !!

Hey hey mr Moffat good to see u round these parts again 👍

Bob! I missed you🔥🔥, keep it up!😎😎

Two of my favorite welders. Great video fellas with good info.

Something to notice, i gues the tig Rod is stellite 6/12 but with tig most of the time you'l need around 3 to 4 layers because of the hardfacing stuff is mixing together with your base material. And also cooling down slowly is pretty improtant due to cracks

Bob is the Man! Love 'em both!

Bob's back

*@**0:54** Love those swirls, to me that's artwork. Was told that logic behind was to never give a rock a consistent angle of attack to pry or lever the hard facing rod (Chromium rod,cobalt, stoddite, etc) off your shovel, and that the swirls mean the angle the rock hits the hard facing rod is always changing.*

Bob!

I met bob n got a pic with him at my hs competition at south coast 😎

Good to see Bob Great video

Def tip the camera dude haha wow nice shots. Good welds!

First welding fine second tig welding awesome also thanks for sharing this video.

BOB! BOBS BACK! HELL YEAH!

So badass. This is the first rod iv seen just break like that. I am so interested in finding out how it lays! Dope ass video guys good work

Holy shit its bob moffit good to see him in videos

Good to see bob.

I had no idea about the rods I will by some to play around with Thanks for the education

weld is art

Stellite is so hard it has to be cast and ground. 3" drill bit would wear out when drilling abrasive bearing mat. .600$ used stellite to build outer edges

Bob's the BEST!!

Wow, it's Bob!😃

Right on Bob !!

YEEEAAAHHH Bob Moffatt !!!!!!!!!!!!!!!!! I love this guy!

Absolutely loving going to school at South Coast Welding Academy! Great instructors and an amazing place to learn this skill set!

Bob is the best

Would be nice to see you using a fume extractor.. You are trying to teach; do it right

BOB AND JASON are kings

Nice fume extraction. If you can smell it, you're inhaling it. Crazy the amount of our older welders here in the states that have COPD at 50 and shaky ass hands from chronic heavy metal poisoning. All things aside, you guys are killer welders.

I’d pay money to see Bob Moffat on this show more

Nice seeing Bob welding! I've never used those electrodes for hard facing but did hear the fumes are really bad . Why no fan or fume extractor?

Congratulações

Very unique material and a lot of fun to weld always wear proper PPE wen welding any alloy's

Snapping that stick tells how hard it is. Crazy thing.

I use the 2.7mm Dia Stellite 6 Tig rods for welding Shear blade tips, It is a pretty nice rod to weld with but you can't put more than about 5mm thick or it will crack, I also peen the welds each time, to stop them cracking when they cool and then the whole blade needs to be cooled slowly in sand buckets so the whole thing cools evenly. Good to see welding of different uses and for special reasons.

miss u Bob..

Woow very nice.💗

Two badasses 🤙🏽

What lense are you using on your camera to get those clear arc shots ? It's fantastic clarity

I did a school project on this and how it’s used for dump trucks and claws

You're my boy, bob!!!!

The guys spot on about clay and sand comment.. If the shape of the weld beads are right they fill with earth and protects the bucket even more. We only use stoddy mig wire now great stuff

Been wondering where Bob got to

Go go Bob 🤘✌️

Any thoughts on a respirator for the stoody rods? I think you're meant to for the stoody mig wire.

I mostly do wire feed dual shield for hardfacing.

i'm looking to try and make a wood splitter using mild steel and arc welding hardfacing rod on top after i've ground a 45 degree edge to the mild steel part. my question is - do i need to lay down a 'buttering' layer of e.g. 7016 first and then put the hardfacing on top of that or is it ok to just weld hardfacing rod on top of the mild steel plate? i've heard that a buttering layer should be put down first but when i have seen videos on hardfacing i have just seen the hardfacing rod being welded onto the steel itself. what would you recommend??

How about adding hardface on top of an exsisting hard base? Does it need to be buttered with a soft material first or can you lay right over a exsisting hard surface?

If i was welding armor plate steel for targets.. would this be the rod to use if its gonna be under gunfire?

I bet tig might he nice on some thinner equipment or for getting a really nice edge on a cutter bar something like that. Kinda would be cool to make a knife out of mild steel then tig some hard facing rod on it to keep it sharp 🤔

Nice sure 🔥❤️

The boss!

BOB!!!!!!

That argon sure is flowing.

بوب موفات اسطورة

I am doing a welding special course for 3 years.

My leaf spring hangers on my 1982 freightliner I would weld a square piece of flat bar steel where the leaf would lay on. Its alot easier than laying down beads to build up the worn metal. Can welding square pads or bolting them to the bucket be possible or is every job different?

Soldar sobre piso es lo mas sencillo que puede haber, me gustaría verlos soldar sobre cabeza, en orizontal, vertical, en todas las posiciones. O en edificios, haciendo montajes,

Hi can you guys educate me how to weld on truck chasis an what is the process to weld on truck chasis poeple saying in truck i should weld uphill with 7018 en some poeple say that it should weld downhill with 6013 our 6010 what is exactly can you guys demonstrate our educate me pleas

Can yall do a heavywall double x ss..tig, stick it out?? 6g? I bust mine last month!! SS Stick is no joke.. I get a lot pin holes everywhere..!! filler n cap!! Sorry its not ss...its inconel 617 but 316 ss is fine...please if you have time! Thanks

Impressive but the best wearing material out there is Eutectic 's DO11

Using Stellite/Stoodite 6 just for hardfacing is a bit overkill. You usually use that if you also have to fight corrosion at the same time, as these are very expensive metals and just abrasion resistance can be had for a fraction...

Lesson learned

What brand / type of rod is that ??

Tig method looks nice. However I would like to see how it works in real life on a used bucket with all the contamination it has deep in the pores of the metal.

David....would you be David Ciriza Junior , from Texas ?

Did you know that the file won't cut when driven backward? Very basuc stuff !

Bob!!

Moffman!

Hahahaha the cheer for bob 🤣🤣🤣

Nice démonstration but I think stick was little cold... thanks any way.

Well, thats it. I am gonna have to get a pure argon bottle to start doing TIG after watching that.

Argon hurricane

Is this like hardening carbon steel? If the file skates, will the weld break easy? Asking because I actually don’t know, not trying to be a douche.

I bet these two make bank.

I ran some stoody 35 this week on two buckets. I managed to run a little vertical up with the 1/8 rods but it left a little of tiddies. Has anyone else ever had to run hard face out of position. I know it’s not meant for that

I have melted several 10,000’S of hard racing rods sometimes 12-16 hours a days sometimes they where 1/4 inches

How about Encinal

Ran a lot of stellite at a manufacturing company, never liked it. Switched over to Eutectic rods and wire, they are a way better product. Stellite seems to be old news compared to what other companies are putting out

👍

👨🏻‍🏭👨🏻‍🏭💯

Lol. Bob knew what was gonna happen. Homeboy didn’t know 💩 from shinola

That youngin should pay attention to Bob....he's a treasure trove of info and experience.....i swear Bob could weld with a microwave if he had too......