Most of my 65 years on this planet Hunter, 3 things come to my mind when Expletives happen. 1-Murphy's Law what can happen will happen, 2-This too shall pass, 3-If at first you don't succeed, try, try again. Maybe I can speak for all of your fans, we are happy to know your talents get you out of a bind every time we watch your videos. We learn something new every day, don't we? Keep on being you and we will keep on watching.

The very fist shot of the tire rolling out the window killed me 😂

Your attitude in the face of persistent adversity is amazing. Keep it up!

"That's my tire..." Holy crap that was funny.

Your trips sound about like mine. I’ve got lots of similar stories to swap sometime. On way back from buying an excavator 2hrs from my house I smelled diesel, stopped and looked and saw fuel shooting out of my fuel primer pump, bottom of paper gasket seal blew and was spewing it everywhere. Was by a golf course and tried to ask if anyone had back of steno pad or something to use but no luck, ended up using a leather glove, traced the gasket outline, cut it out with a pocket knife and installed it. Didn’t leak a drop and it’s still installed that way many trips later. If it ain’t broke don’t fix it, when it breaks, fix it up and keep trucking. Love the content, keep it coming.

After getting stuck on that corner so many times you think it would definitely be worth the cost of for a load of gravel to widen that turn 😉

“Hey hunter watch the end of the trailer there” *completely misses ramp* 😂😂 25:44

Always a good day when Hunter uploads

What people don't understand-- who haven't been on these long trips: This country is MASSIVE

OMG Love the sound of that cat. That growl, black smoke, whistle, tires spinning. So cool!

Perseverance…….ingenuity…intestinal fortitude……courage…..all the words that come to mind when I watched your content. Well done, I’m impressed.

Well it was tough Hunter ,but you did it man. You adapted and overcame fine job. I wish you well in your new place and thanks for taking us along 👍

Love the content sorry for your trouble. Greetings from Dublin Ireland

Road fixes are the best !! Nice work, got her back moving, again and again!!😂

It's amazing to see the behind-the-scenes of such a long haul. Your dedication to getting the job done, no matter the conditions, is commendable! 💪

Just a thought, in case of all of them are pretty old lines, maybe get rest of them new too🤷🏼‍♂️

Still shocked that tire came off the rim while driving 😂 glad you made it home safe

Not a sketchy load at all, love this haha

Hell of a trip Hunter. Glad ya made it.

The stuff you get to work out for ya stresses me the heck out and I’m all here for it. Lol

Wow, I bet not too many people could have pulled that move off. Great to see you use your skills to solve problems as they come up. Keep making videos, there are some of us who look forward to them.

great video Hunter ,you seem to be able to solve your problems without too much hassle ...but what a trip....happy you got there safe and sound

Jeezus you were giving me PTSD flashbacks from when I owned a 1974 Freightliner that was 13 yo when I bought it. Good truck, but it was 13 yo and I was always broke living load to load. Old Maude was tired and broke down A LOT. Never in a good place, either. Learned how to slither up inside to do engine repairs without tilting the cab because that was a nightmare unloading everything not tied down. Didn't have a portable wire welder, those weren't around back then, but it wasn't hard to sniff out a local welding shop to do some creative stuff. Good luck and spend a few bucks on some base material for that corner.

As when u was broke down it would of been nice for Heavy D to fly his helicopter in with the part u need. U went out of your way many times for him.

Your persistence and most importantly, attitude always pays big dividends. I knew that you would have a few issues, anyone would, but you managed to overcome them all, no sweat. Looking forward to seeing you fix up the daily. I forget if you mention it or not, but are just going to launch the bed and just toss on a flatbed instead?

Not having diesel going to a cylinder will not give the upper cylinder lubrication and kill the piston and liners. It will happen very quickly.

Crazy trip man. Welding that fitting at gas stations had me laughing pretty good. Epic load. Not sure that would pass MTO inspection up here in Canada lol.

The fact that hunter lost a tire had time to get his phone n record only tells u how long that tire was rolling .......damn Turned out the best though

So glad your posting content I really enjoy watching your. Channel all the way from Australia

Pretty good going considering how much you were hauling by yourself 👍

My Man Hunter, I'm sorry that I'm late. Now that was fucking exciting. First the tire rolling off, then the blowout, the injector problems, it scares me sometimes that you travel alone. But how you solve all the problem so sensibly is admirable. That is another reason I love your channel, see, it's not just waiting on that flash of skin. lol Your brilliant. When you say your lucky, your are indeed Hunter, your living "your dream". I also want to mention I really enjoy your editing and camera work on this. Some of those shots with the sun behind you are amazing. The shots out the cab window are priceless. I think that old ford girl really loves you and did her best to bring all your belongings home. Stub was so excited to be home he almost jumped right off that damn trailer. Again we all have to give you high praise for getting that massive load finally home. Hunter I'm happy you got all your possessions and toys home safe and sound. Love and Peace.

Glad you made it home safe and sound. That was a rough trip.

Attempting to weld the injector line was worth the attempt! Good on you for giving it a shot. And that drip would probably have gotten worse with time. The fact that you were able to weld it enough to make it that far was impressive!

Congrats Hunter - glad they let you weld outside the drive through like that - and didn't get run over.

Just watched my first Hunter Goodrich video. Seems like a pretty 😎 channel. I subbed to your channel.

Hunter , I respect the hustle my friend !!! I’m dying to see you get settled in and start building and creating and repairing stuff. Thanks Hunter. I enjoyed this crazy trip

You're crazy Hunter! I'm glad you're home with that load though!

Hunter your amazing. You take the cards your givin, and you keep going no matter what. Not giving up, you figure it out and keep pushing forward. You’re an inspiration for the next generations 👍🏼

Literally just got to 1m50s was about to say alloy wheels corrode check your tyres… and wheel nuts. Here in england we have to show we’ve checked wheel nuts every week to our government body. Ive never had alloys on a truck before.

A bit of a Haggard Garage of trucking here, and I love it.

I don't think that I've ever seen someone as patience and determined as you. I'd of lost my shit in the first 5 minutes and then said fuck this I'm done 😂👍🇨🇦🔧

That stretch of interstate at the North Carolina/Tennessee line is my favorite part of that drive between Ashville and Knoxville. Such fun, twisty roads. At least in a car. In a semi, I'm sure they are insanely irritating.

well, nobody can say you aren't tenacious!

Yooooo 12 seconds in and "that's my tires"!!! I had to stop the video and get me some popcorn 🍿!!! I knew this one was gonna be GOOD!!! 😂😂

Aww man, it will sound so good with some dual straight pipes, man I love those inline 6 single turbo cats🤩

Whenever you're creating any structure that should resist shear (like those metal bars securing your pickup), always try to create triangles in each plane.

If you dismount the tire roll the rim on flat ground. If it steers left or right its junk.

My brother started his trucker life, with a ford like yours. Had the some problems. Good attitude

Talk about MacGyver you are the MacGyver of all times. You have a very creative and knowledgeable mind Hunter. Bravo on your part brother

All that and you still had a smile on your face. That's awesome

Me and you have very similar luck, that's why i started shipping stuff I buy online states away instead of getting it myself. I have newer and older trucks/trailers and haven't had much luck. The way I decide and convince myself to just ship stuff is just "pay 1000$ to ship a pickup truck from texas to my state, or drive there spend nearly that in fuel back and forth. Hope nothing breaks or don't lose a tire otherwise that would already put my costs higher then shipping and staying home." I know your situation here was much different so paying someone to ship all that wouldn't have been worth it. It's nice/sucks to see someone with terrible luck waiting for the days of some good luck such as myself LOL!

to fix the fuel line when the line itself snapped instead of the fitting, I'd get a 1/4 steel coupler or whatever is closest to the line diameter, and then use a 1/4 npt die to thread both ends of the fuel line. and then 3 rolls of teflon tape lol. I highly doubt that would leak, but as far as it breaking again in 10 miles who knows. do the lines have a special heat treatment? seems like the welding made them brittle, not that you really had any other options though... love seeing the ingenuity and self reliance. keep it up.

As old Marisa Tomei once said when you're down south in the mud and you don't have a limited slip one tire spins the other does bupkis😂😂😂

Dude, awesome video. I was so eager for part 2. Can't wait to see some projects

6:05 Hunter, that’s my 7-11 in Springville! I met you when you helped Dave get rid of a bunch of Datsun Zs.

I could have been a little more angry if I had been on that trip when it comes to lemon after lemon.😂👍 That man nerves are made of steel.

You have one heck of an understanding friend. One of my friends ask ,hey do you mind If i bring a bunch of stuff here from 3/4 across USA to here? Well he better be a best friend. Lol .excellent videos Hunter

You have a great attitude. I swear things like this happen to any project I work on. Not to this scale though lol. Love the channel!!

What an adventure thanks for sharing

"A creative load" - i couldn't have phrased it better! 🤣🍻 (i'm commenting, as i watch - currently 7:44)

Watching from KENYA 🇰🇪 EAST AFRICA.good job bro!

Simply unbelievable!

Sorry we weren’t able to help you out and find you a fuel line buddy. Was good meeting you though.

Hunter and I have the same kinda luck - I've had to repeat to myself over and over and over "when the wind fails, we go to the oars".

Dude that was a sick video! You’re a pretty intuitive guy!

Life is an adventure, some bigger than others.... most not close to yours. Hope to see your projects from the hills of North Carolina.

Goin out on ur own struggling by urself u have the strength to make it successs will b urs,🙏🙏🙏

I had a cat b model that had the same problem breaking lines, to solve it you need to get an arrangement diagram of all the injector line brackets and mounts, it is vibration that breaks them and one missing bracket will let the lines vibrate and that is what causes the failure.

Without clamps on the injector lines you will break a line every couple thousand miles.

Epic episode! You took all of these challenges in your stride and you powered on. I feel bad for your mishaps but it makes for great content! 😅

Hunter, you're a mighty, hard-working young man, mister ...

This was a crazy adventure. I have noticed in the other trucking videos zero outside rolling shots. May I suggest a few gopros? One facing the trailer for some truck stop and in town maneuvering and one in cab of you rowing gears. Would make for some cool b roll and would feel more connected to the adventure.

I had a 95 F150 just like that.. 5spd 4x4.. Fantastic truck. It only had a 302 though; entirely too small for such a big truck. But it was great in 4Low. So I upgraded to a 2002 F350 with a 7.3L.. Probably the best truck Ford ever made. Between owning the two of them-- Lets just say, I'll never be a chevy or dodge guy

Where the hell is dave?? Sure glad to see he is right there to help out! Oh wait it's not a big money deal for him so guess you won't see him.

That injector line, after you welded and tested it, you can see fuel vapour leaking, before it blew again

Tough luck! Still looks like a solid rig and a trailer full of fun!

49 seconds in and I'm thinking a pre trip inspection was skipped 😂

*Some backyard neighbors installing tires in a rush Hunter: How in the heck?????!?!?? Hahhaha

'content corner' should b the name of that turn.

New to the channel here, really enjoying the sketchiness, but why is the exhaust just side dumping 😂 there has to be an old stack laying somewhere 😂

9:33 i'm from Germany, and here we have a word for what happened - "Verschlimmbessern" - like, "fix it, till it breaks"! 😂 …sometimes, the Chinese "[cha-bei-doa]" (good-enough) approach can get you home. 😅

Your patience is commendable.

Hey hunter will you ever restore your cabover? I feel like it'd be a fun series just like Deboss with their cabovers! Maybe not as far as getting it to an immaculate condition but just restoring on the mechanical part of it, and rejuvenation on the cosmetic part of it. I'd like to see your cabover as being dependable one day without any major mechanical problem 😂

I thought that was my tire! It came off my car in Wyoming and my car is still there! A month later.

Keep up the up loads love seeing how you just get it done

Hello there bud. Hope all is well ✌️👍🙏🙏

Should check out SH Tube in Corbin, Kentucky they do some amazing custom built stuff for big rigs!

Hunter I appreciate your get r done attitude!

Damn, you have the worst luck Hunter!

My man….you give me anxiety…. Welcome Home! ✌️~~~~>Oregon

Dude 3 extra loads of gravel woulda saved you so much time and effort on that corner lol

Keep on keeping on hunter life will test your shit to point of no return so keep creativity 😅😅😅

Holy shit gretta , look at that lovely black smoke.

Illinois is where Cat manufactures a lot of stuff, probably would have been able to find a fuel line with less lead time here

Hunter you a nut! But you got a ton of heart please stay safe don’t give up and keep the videos coming!

How you made it without any tickets is a story of itself… Best of luck

Just bought some Falken Wildpeaks for my Jeep! Thanks!

I sang “Time to do some sketchy sh1t” many times during this episode😂😂😂

Man that was some troubleshooting and ingenuity if I have ever seen any. Damn brother. From another guy who drives for a living. I would have replaced all those Injector lines after a failure like that. If you have anymore trips planned. That was a nightmare man.

Dang. I feel like I’m reading a Novel that I don’t want to end. Only half way through but Keep on Trunkin as Jerry wld say