Hardieflex has been free of asbestos since 1981 according to their website.

Same

Ang pangit kasi ako mismo nag try .. di nasag0t sila

Hello Coffee berry, you may choose any. Others would opt for steel frame because its easier to use if you have the right tools. For some, they prefer wood because you only need a hammer to install it on a HardieFlex Board.

HardieFlex by James Hardie thank you for your kind response

Taga saan po ang shop i want to know youre branch in luzon may workers po ba kayo 😁pwede mabayaran sa paglagay tnx

Are you referring to roughing ins?

@@jameshardieph yes

@@liselabtalk For smooth circular holes: 1) Mark the center of the hole 2) Pre-drill a "pilot hole" 3) Using the pilot hole as a guide, you can either score the hole using the HardieFlex scoring knife or use a hole saw fitted to a heavy duty electric drill. 4) Tap carefully (you can use a hammer) to open the new hole

you can use rivets but it's not recommended.

Hello Nicki, your boards will perform better if you use HardieFlex screws or nails.

@@jameshardieph Kung gagamit ng hardieflex nails kailangan paba butasin ng drill ang hardieflex board?

Most contructor in dumaguete had different way in installing hardie flex. most of the time they used blind rivet instead of hardie screws and grind the protruding rivet heads with angle grinder and used A and B epoxy for the joints.. I actually used this method and it works very well.

May nagsabi Rin SA akin Nyan.

Wala pong asbestos ang hardieflex. :)

Lalanggamin un connections mo kasi masarap yung vcut

just inquire to your local hardware store

Latex po kasi considered concrete napo sya dahil sa materials na ginamit po.

John Knight

always use paint primer

Kay Alipio it is called Drywall Screw Gun. Meron nitong chordless. Pero puwede din ang ordinary variable speed drill na may screwdriver bit attachment.

Impact driver. Designed for drilling screws. Mas malakas ang torque nyan compared sa ordinary drill.

Sir anung magandang brand gamitin na drill bit pang botas sa hardieflex?blind revits kasi gamit ko.. Slamat

@@clarkalcover4015 ok gamitin ang rivets sa umpisa pero hindi magtatagal bibitaw ang hardiflex. Mas mainam pa din gamitin yung hardieflex screws

Sabi ng iba mas okay daw po kung rivet

K

pwede. using tox & screws for wall siding.

may naka-print sa board mismo

Same question here?

Same question rin po sa baguio po aq magpa lagay

Tama ka dyan sir,pagkaalam ko sir delikado talaga ang hardeflex sa kalusugan ng tao lalo na kung ilagay sa loob ng kabahayan 😊😃😉

Hala ! Totoo yan pa naman gamit namin katatapos lang.

Ano po ang safe na gamitin for ceiling ng residential?

@@mimosatarabeshi4553 Safe gamitin ang hardiflex for ceiling. Matagal ng hininto ang asbestos(80s or 90s pa). Mostly sa ibang bansa kasi gypsum board ang gamit(cement board for tile backing lang). May kanya kanyang advantage at disadvantage. I personally prefer hardiflex pa din since mas resistant to water, termite, fire and moist. Mabigat nga lang at mas matagal iinstall. Gypsum is lighter and very easy to install. Bawal nga lang sa moist and water. There are moisture resistant and fire resistant gypsum, not sure if available ba sa mga local hardwares(I doubt). Mostly yung normal kasi available.

@@angryshaolin thank you so much for the input. I’m happy we made the right choice of going with fiber cement board! Salamat talaga for affirming. Hehe ☺️