ProMonk, there is nobody more naturally funny than you on KZfaq.. That part about the wiring and Leesburg I almost spit out my lunch so funny. Great job 😄🤙🏻

Monkey - love your videos. It’s the fact that you do “walk through, talk through and wrench through” that make them so awesome. I don’t know what the Racer Boy theme is for baggers, but you have me interested and researching. Keep up the great work!

I usually read the instructions afterwards to make sure it was done correctly

Love Harley Davidson. Can't afford em though. I'm building a old ass GoldWing. A 1983 Aspencade. One day I'll own a R.G. limited. I'm two years away from being able to purchase. That's when the ol car payment will be gone. Looking at 2015 or newer. For now. The 83 gets the nod. Purchase of the bike and all the crap I'm doing I'll end up having 3k in it. Not including the cost of my time. Bought non running. It now runs idle and stops. Next is paint gotta wait till spring. Doing a two tone harley-esk paint scheme in green and black

I did that light bar setup on my bike back in 2017 when I bought my road glide. I got the white light bar from eBay for 16 bucks. I posted it on the road glide FB page and had a bunch of people asking me how I did it. I should have gotten a patent🤣

Liked the time lapse, so you do work on your bikes!!! Liked the banjo music even more.

Perfect timing just sat down for my morning coffee

The time lapse was great. should do that more often.

When I had to replace my battery on my Indian Roadmaster, i know, its and Indian, I left the ECM connected but put in a Crown Royal bag. Gave me insurance against a very expense mistake.

I like the time lapse. Also, great tip about making sure your tank is full when you are removing it 😂😂😂

Brother, You garage looks clean! lol No boxes!

I read the directions, and by that I mean I look at the pictures.

Looks like a Face I a robot face...Ever heard of Ninetendo R.O.B the lights looks exactly like it

Great vid if that bar hits your fender you got way bigger problems lol

I like the time lapse part🤙🏼 keep up the great work! Sorry I didn’t get back to ya on buyin that seat😒

Great video. Now I have a “how to”, can’t wait to put that light bar on my RGS.

I really like the Advanblack hand gaurd lights

Great video with information and humour, normally poked at your good self. 😂keep doing what you do man.

Merry Christmas to you, tge Mrs, and your child! Hope Santa is good to you! Coal for most of us!😮😅😂

Great video and I really like the time lapse.

Happy holidays to you and your family Pro Monkey! Hope you get everything you wish for!

Nice video and nice light, but the wiring... Choose an accessory switch kit from Harley, install a switch on the dash instead of the blank-plates. Tip for a new video. :-)

Looks like a smile face lil

Nice job on the new light Merry Christmas to you and yours

Heading to J&P cycle this morning for lights. lol perfect for the holidays. lol....I know that look..."well shit, where did I put that"...hmmmmm Merry Christmas to you and the family.....

Ok,on the oil issue at air cleaner. Since installing cam,you have increased need to balance air flow in engine cases. The trask trans top vent would an excellent choice. Also, very important, M8 engines when modified prefer to be happy when oil level on dip stick is about 1/2 quart low. Trust me, it will help with air cleaner bleeding oil. Enjoy.

Wow you actually did a video with you DOING something, was the mechanic busy today?😂😂😂 kudos.

Looks good, and like the new camera angle 👍👍

That time lapse must have been hell to edit. What with all the having to cut out the real mechanic jumping in and doing it all for you.

Pro-Monkey you should take the wheels out and get them powder coated Red to match the Windscreen. It would look bad arse, and you should also get the beauty rings on the engine heads done the same color. Just Saying…

Looks like bender from future Rama

timelapse! wow, its like a real youtube channel now. lol

Always look forward to your videos brother

Doing well. 😊😊

18:35 - To me right here it looks like either C3PO or W.A.L.L.E.

New follower here, Merry Christmas.

Dam Monk, I just noticed those specks. Just how bad is your peepers? I bet you can see the future with those.

Time-lapse Cool 👍

Love the video, more time laps please

Great video, love your content. Just sayin for this and what I saw... Phase add a shift linkage (solid black) Also, I feel that spot under the frame for the new light switch will get so f'n hot and melt any adhesive. My thought was to utilize one of the dummy buttons on the top tree. ✌

😂😂youre such a dork....but great video and idea for my sons bike. Only issue I have is the bracket covers the adjuster for the headlight but thats ok. How many times would you adjust the damn thing!!! Merry Christmas to you and yours brother.

That's a sexy table!

Next project should be, proper handlebar and riser install on a performance bagger. Come on man.

Nice

Kinda looks like Bender from Futurama 😂

I don’t understand how that bike is so damn clean under the seat!! Lol I’ve never had a Harley this clean…

Could still tap into the power outlet and use the switch 🤷🏼

Well I’m sure you have an idea of how to fix the oil dealio DK custom products have what they call a transformer mount and air cleaner that is what I used after some other failed attempts

How does the light bar work at nite for you. Want one now. I'm in Michigan lots of fog. Just curious. Great video. As always

MERRY CHRISTMAS 🎄

Love the hat

Why couldn't you run the switch right off of the auxiliary buttons on the inner fairing?

Great job looks like a lot of stuff to remember. Definitely not for me. 13:12

What is that hurly durbison mount you got there. Is that for your phone? That’s really cool.

Just curious, why didn't you mount the switch to the inside of the fairing for easier use while riding?

Merry Christmas, now for the love. Please pull off those ugly fork reflectors, it's killing me .

Nice video, thinking of doing the same. Question, how do you like the amber color lens at night or would the clear lens cast light further? I'm needing more of a fog type on dark roads/rain and looking at tis install instead of crash bar lights. Thanks,

Hey…! Looking at that seat cushion on the garage floor. Is that for the bike or your garage stool?

You do know you could have tapped that switch off the cig lighter plug to right lol probably should have used relay to as well

I need that hat.

I read the instructions twice and still get it wrong.

Let us know how well it lights up! I live in the country and I'm always looking for better lighting!!

How do you feel towards the build quality once you get that Harley Davidson strip down?

Ok...as stated before GREAT VIDEO BUT...one thing thats been bothering me. Instead removing the tank and running the power button down the spine...why didnt you just run it to the already existing switch blocks in the dash like yhe CVOs??? The plugs are already there in the harness. GRANTED youde have to buy the factory switch from Harley to power it up but doing it that way would be alot cleaner and you wouldnt have an external switch to fumble around for.

I have an 04 Dyna lowrider that I've converted to a trike could that be mounted to the lower Triple Tree

What kind of seat cushion do you have laying their by your seat? I have an Air Hauck I just love. In my 3000 mile's one way to Sturgis my butt couldn't take it anylonger. Soooo the seat cushion added 2-300 miles a day farther. I'll do between 6-800 miles a day now at 69 yrs old. You do the math. I say best $100 I ever spent. I tried jel cushions but hated them.

I'm working on my bike trying to figure out why it won't start as I listen to you. My stupid mistake why it won't start. Missed a battery cable, Oops

Just so you know, you do NOT have to splice ANY wire on your Harley tp ANY wire harness from custom dynamics, I deal with Brad, I have about 6k worth of there led lights on my 22 ultra, they will make you ANY harness adapters to plug & play your lights, like I told Brad, I paid a lot of money for my ultra, I’m not cutting & splicing anything on it, yes it might cost 5-10 bucks per connector but it better than cutting, even for my custom dynamics led run/blink mirrors, they made me a harness to plug into the system with dead ends on them to attach the splice ends onto, but I still never cut the wires

Where did you get your cover for the power vision ?

Kinda looks Like a robot face lol

Not worried about burning your hand on the motor reaching to turn the light on? Using a table vs the trash can, what are you trying to do be a “professional monkey” ?!? Lol Lightbar looks good!! How about a short riding with it at night? Ride safe happy motoring!!

What do you do for work?

Actually it looks like you have two eyes and A mouth on the front of your ride.😁

Yeah , not much of the look monk! Go beg for a new head light !

Your speech about brotherhood in 1% clubs is so false there's one thing that comes before brotherhood and loyalty and that is self preservation in my buisness I see it all the time .

Looks like an unimpressed face 😑😑😑😑😑😑