Yes sir! You’re very welcome. I’m glad you found it useful. I felt like everyone love vrod and want to own a custom vrod but so hesitated to do it since there are no one willing to share it !

Thanks for your support! Will try to make more video

Hi! You’re welcome

You’re welcome rider 👍

Hi! Thanks brother! Wish you Nice rides out there

Thank you very much for watching and subscribe for my channel! 😀

Cheers 🍻

@DIY_Corner253 can you please drop a link to the exhaust and the body kit you put on.

@@Arsh-bv2ij link for body kit is in part 1 installation video. Exhaust is Akrapovic 2 to 1

Me 2

Hi, thank you brother. I ended up find a better spot for it already:)

@@DIY_Corner253where did you ended putting it?

@@jermaroemerencia2551 hey brother! I ended up mount it right under and parallel with the master cylinder.

can't see it on the video. so it seats behind the radiator Shroud ?

🤘🏻😃 welcome in

Hey! Thank you 😄🙏. Pretty concentrated and No music for this particular video lol

Thank you rider brother! Muscle already got the aggressive looking! I think you can convert to night Rod special rear fender if it’s what you’re looking for 😀

Thank you for visiting my channel! Depends on where you buy the kit, my is around $1200 unpainted. You will have to do all the work yourself. Watch my part 1 installation video. I have the link and more info about it :). If you order the kit from them. Tell them you got referred by Tu Nguyen (DIY Corner ) enjoy your vrod

you are right. It won't fit perfectly. there will be a gap between cover and odometer. I spoke with seller and that probably the best they can do. each body kit maybe lightly different. for the gap, you probably have to seal it up after installation or you can leave it like that and make sure no water get into it. Don't ride the bike in the rain or wash the bike the way you wash your car. after custom the bike need to be treat like a show bike, lol real gentle =D

I didn’t have to order it. You will have to order a long one and cut it down. I believe it’s around 5.5” long

Hi friend! Thanks for visiting! Check out my installation part 1 video in my channel! I have the link in there

I recommend using plastic fastener. It will be easier

Hi I did custom rear fender on different VRod . Not this one. I didn’t have a chance to make video for it since it was little messy to install. But I plan to make a video in the future

@@DIY_Corner253 is it hard to do the rear? Does it require cutting?

@@albertolariosmarque I took the rear frame off so no cutting on the bike, just trim the fender

Removing the odometer doesn’t make any change to the bar, I just make a metal plate to cover on top to make it look nicer.

Thanks

You just need to drill a hole on top of the plat top cover and mount it on there or mount it on the inside wall of the air box pan

@@DIY_Corner253 amazing thank you!! One more thing, for the air box cover, you didn’t show how you drilled the 2 holes in the front to keep it in place. I bought the exact same kit so wondering how you did that v your video is great

@@cdomenico27 I showed it from minute 5:25 in the video. Pretty straight forward brother

Hi, I am also installing this kit and was also wondering with the sensor. Because there is a company which make new cover for the airbox pan for airbox cover with integrated odometer. But you say we don't really need that and can fix the sensor somewhere inside the pan? Thanks in advance

Hi! Where are you located? I’m in Spring Texas

I live n Conroe tx

AggAuto Universal 40"x13" Car Grill Mesh - Aluminum Alloy Automotive Grille Insert Bumper 6x12mm Rhombic Hole, One of the Most Multifunctional Shape Grids 100x33cm Black a.co/d/dwqhEJy

Hi! I will make a short video about that soon ! Stay with me

@@DIY_Corner253 Thanks!!!

Hi, you can find another container and transfer the fluid over but then you need to bleeding it! What I did was mount it up side down with a couple of zip tire on the side without extending the hose. Just paint the cap black. It the quickest way. You can see in other video I made with the bike

Hi! I think it is M8 metric

Cut to where it got about an inch left from flat top filter cover. Sorry I don’t have the exact measurements

@@DIY_Corner253 where did you get the M6 bolt? can you post a link?

@@johnnylee3750 sorry! unfortunately I don’t have the link. I got it at work and cut it off to the correct length. I think You should be able to buy at local hardware store

Around $1200 for the body kit

Around $1200 for the body kit

Hi! Do you have a v rod or you have different bike? I only do v rod. And if you have Facebook, you can get in touch with me at “Tu Hoang Kha Nguyen” for easy communication

:) cảm ơn bạn mình chưa lập instagram cho VRod. Maybe create one pretty soon