Harley Dyna Switchback shifter linkage change
Рет қаралды 1,752
4 жыл бұрын
@ricardoquiroz588 3 жыл бұрын
I have a Switchback myself. So keep the videos coming on all upgraded replacements. Thanks Biker Brother
@seancurtisministries 15 күн бұрын
I didn’t have a clue about how hard it is to find parts for this thing!
@blainenornhold8608 3 жыл бұрын
Do you change your own oil? If so how many quarts does it take ? I talk to different dealers and they all give me different answer they say 3 quarts or 4 quarts. My service manuals said 2 1/2 quarts. I just dint want to have HD change my fluids i would rather do it myself.
@2ndkickmotoandauto 3 жыл бұрын
2 1/2 is what goes in mine. Overfill it and it will end up coming through your air breather and wrecking your oil filter
@genepulse 2 жыл бұрын
Hey, thanks for the video. A quick question: I have a fair amount of play in whole shifter arm assembly, the shaft also has amount of play. Is it normal for switchback? Can’t find a part to replace shifter and a shift arm with shaft. My “2013 Dynas” manual doesn’t have the part number, just a diagram of what goes where.
@2ndkickmotoandauto 2 жыл бұрын
A common problem is that the inner linkage can come loose. Check it and tighten it. If it doesn't tighten up. The shaft maybe stripped. Same goes for external linkage by your foot.
@genepulse 2 жыл бұрын
@@2ndkickmotoandauto everything is tighten up. By the inner linkage you mean the shaft (that short end you’ve lubricated in a video)? It wiggles inside in all dimensions. Can’t find a part number for it. I’d change the whole assembly, but can’t get a match neither at in aftermarket, nor at Harley site.
@2ndkickmotoandauto 2 жыл бұрын
By inner shaft, I mean the shaft behind the clutch. It's the bottom side of the lever that the linkage is attached too. Also Harley's do tend to have freeplay more then other manufacturers
@genepulse 2 жыл бұрын
@@2ndkickmotoandauto yeah, but that’s some scary amount of play. Thinking to change the whole thing. You think this module was designed specifically for switchback? Won’t regular dyna shifter shaft/arm fit? What would you do? Sorry for so many questions :) it’s my first bike
@2ndkickmotoandauto 2 жыл бұрын
I'm not sure. The switchback shares many parts from many models including dyna and touring models.
@seancurtisministries 15 күн бұрын
It is a problem, ALL the time! I wished it was only a problem “some time “
@blainenornhold8608 4 жыл бұрын
What part s that gear shifter linkage and did you have any problems with it. Can’t find any for my 14 FLD
@2ndkickmotoandauto 4 жыл бұрын
Any harley shifter linkage will work.
@2ndkickmotoandauto 4 жыл бұрын
Watch full video. I explained how
@blainenornhold8608 4 жыл бұрын
2nd Kick! moto and auto mi
@blainenornhold8608 4 жыл бұрын
Mine gear shift linkage is 15” CTC and most of the harleys are only 12 3/4 you think they will work?
@2ndkickmotoandauto 4 жыл бұрын
Watch how I adjusted and clocked my front linkage bar back.
@jerryt6177 3 жыл бұрын
Curious about your upper fairing. Who makes it and is it just the outer shell? Don't need a radio or any of that stuff and not sure if I can get one that doesn't need the inner half with speaker cut outs.. Can't see what your bike has but the look is right...
@2ndkickmotoandauto 3 жыл бұрын
Its a Memphis Shades fairing. #7011 same as road king. See my video about trim and deflectors
Ride Fit Nation
Рет қаралды 8 М.
Wrenches Corner
Рет қаралды 1,5 М.