Happy to help. Any questions just ask. Thank you for watching and all your support sgtboz.Great safe and have a great day.

Happy to help. I hope you're feeling better and get better every day. And yes, Sportster will put a smile on your face. Any questions just ask. Thank you for all your kind words and your support. Antonio ride safe and have a great day. And get well soon.

Great tip! Thank you for watching and all your support Pat. Ride safe and have a great day.

Happy to help. Any questions just ask. Sportsters are great machines. Thank you for watching. And all your support Jesse. Ride safe and have a great day.

Happy to help. Any questions just ask. Thank you for watching and all your support Josh. Ride safe and have a great day. We all need to save money that's for sure.

Happy to help. Any questions just ask. Thank you for watching and all your support Raiderworld. Great safe and have a great day.

Happy to help. Any questions just ask thank you for watching and all your support blackhands. Ride safe and have a great day.

Happy to help.Thank you for watching all your support mpista. Ride safe and have a great day.

@@TwoWheelRocco I watch your videos all the time some of them over and over. You have helped me in so many ways to keep my Sporty on the road.Your presentations are easy to understand You Rock Rocco !!

@@mpista7182 truly, thank you for your kind words. Ride safe and have a great day. I love these motorcycles and to help people stay on the road.

Happy to help. Thank you. I love that Corvette too. I've owned it 45 years ride safe and have a great day.

Now i need your help very much. I have a 883 curb Sportster 2000. It is shots to the carburetor, but only at idle or slow driving on the parking. I have done next: 1. Checked the fuel tank - clean. 2. Cleaned the strainer in the tank - clean. 3. Checked the fuel shutoff valve and the vacuum diaphragm - they work. 4. Replaced the vacuum tubes - the vacuum holds. 5. Checked VOES - works. 6. Cleaned and checked the carburetor, accelerator pump - everything is fine. 7. Compression is normal. 8. Intake manifold - the gaskets have been replaced, there is no air leakage. 9. I have changed the head gasket, checked the valves with solvent - there are no leaks. 10. Replaced spark plugs, replaced high-voltage cables. 11. Ignition adjustment has no effect. What you think?)

@@artem4480 ignition module are notorious for failing on those bikes. located on right side under nose cone, too much heat causes intermittent problems. I hope this helps. Let us know how it works out. I couldn't really understand what your bike is exactly doing? Shots to the carburetor???

Happy to help. Thank you for watching and all your support arten. Ride safe and have a great day.

kzfaq.info/get/bejne/n7meqKqTud2opI0.html

​@@TwoWheelRoccoThanks for your answer) Could you see video about it?

Happy to help. Any questions just ask. Thank you for watching and all your support Garth. Ride safe and have a great day.

@@TwoWheelRocco working on my 01 Harley sportster hugger, didn't mark the cables, and I'm replacing the throttle cable and return cable. Which one is NEAREST me when looking at the side of bike/carb?

@@user-rv2cy3rv4e take a look at the video and take note which one has the Spring on the cable and use that as a reference point. It's only two ways it can go on. And then, if you throttle twist down, and the gas goes up, you're in business. I hope that helped. Offhand I don't recall which one.

Happy to help. Any questions just ask. Thank you for watching all your support Jeff. Ride safe and have a great day. And thank you for your kind words.

How do you help, thank you for watching all your support Bobby. Ride safe and have a great day. See you soon.

Happy to help. You could buy them on eBay. I'll send you the link. Otherwise you'll go crazy looking for them. Thank you for watching and all your support. Charlie don't feel bad many many years ago one took off from me never found it again. Thank you for watching and all y. Ride safe and have a great day. www.ebay.com/sch/i.html?_id=335129054550&_nkw=Motion+Pro+01-0032+Ferrules+for+Throttle%2FIdle+Cable. Hope this helps

Happy to help you'll notice there's a spot on the cable hardware where that spring slides in when you're installing the cables. It gives you a little room to wiggle around. Do the twist grips first and I believe that's the Second cable has the spring. Take a close look at the video. 7:20 Hopefully that helps. Any questions just ask. Thank you for watching and all your support Rich. drive safe and have a great day.

Happy to help. I've seen this before. The cables were ordered off eBay and their Chinese knock offs. they are just an eighth of an inch too short. I've seen people pull the metal off the cable and cut it back so they have more wire so they can install it. That's up to you how you wanna go about this, Any questions just ask. Thank you for watching. And all your support oxblood. Ride safe and have a great day. Let us know how it works out. Remember, you will end up with minimal adjustment at the throttle. I would return the cables and buy good ones different vendor and spend a little more money. Ebay is notorious for a bad parts. I like JP cycles fast delivery.

Happy to help. If something is not broke don't fix it,, your throttle as I understand you're hitting your front brake and the throttle is revving. That's the way you are handling it. Do you have free play in that throttle like a quarter inch if you do, that's proper some people like a little 8th inch. the less free play the more sensitive it is as you hit the break or when you just have the bike and you just hit it and it gets two sensitive free play is good for storage. I'll send you a video on how to winterize oil changes and good gas to 2006 bike so it's a Carburator bike. Start up bike. turn the Petcock and shut the gas off. Let the bike run until there's no more fuel in the carburetor. It will die out. Keep the bike on a the battery tender in the garage, check tire pressure. Wait till Spring. take a look at the video. Let us know what you think. Thank you for and all your support and ride safe and have a great day. kzfaq.info/get/bejne/ett1oZdnmpm2ioU.htmlsi=xcxwmXI-peOdvaNE

Happy to help. I have seen this before, Chinese cable. Buy a new one from a better source. Thank you for all your support Ben. Ride safe. Have a great day. Let us know how it works out. You know there's not much to the cable if it's too long, it's too long.

Happy to help. Thank you for watching and all your support. Antonio. Any questions just ask. Ride safe and have a great day. Thank you.

Happy to help. That's Siamese carburetors if I remember right so now you say it only runs with the choke on. That tells me that your idle jet circuit still needs cleaning. Sometimes it takes a few shots at those old Honda 750. Thank you for watching and all your support Ricardo. Let us know how it works out. Ride safe and have a great day. jet circuits are small on those twin carburetors.

Happy to help. Any questions just ask. Thank you for watching and all your support Fred. Ride safe and have a great day.

Happy to help. Any questions just ask. Thank you for watching and all your support. Great safe and have a great day.

Happy to help. Put all the play back in the cable. Makes it easier to remove or install. Thank you for watching and all your support Kama. ride safe, and have a great day.

@@TwoWheelRocco Thanks. Your videos are some of the best. Ive learned a lot about these bikes from you. Thanks for making then.

@@KamaTanha happy to help. Any questions just ask ride safe and have a great day.

Happy to help. I've seen this before and actually you bought a cable off eBay and it's a Chinese knock off and the cables just that short to give you those problems. It's not my first time seeing that with knock off cables. China. Thank you for watching and all your support. Ride safe and have a great day. It's an 8 inch off those cables. Chinese damn shame. Sorry I don't have a better answer for you. Been there done that the right cables are not that hard of an install as long as you can get those adjusters on your twist script all in you should have no problems with the right cable.

@@TwoWheelRocco I'm just trying to get my existing cables back on after replacing the fuel inlet valve in my carburetor, so they are the stock cables. But I don't know where that little spring goes. Finding a diagram that shows that seems to be impossible. Even the service manual doesn't mention how to route the throttle cables.

@@jp2code happy to help look at part. 6:50. Then look at part 7:25. The spring will be on the inside cable. Take notice I removed the chrome cap to make room for the cable to fit. They were Chinese cables. That's why I know about it. The original cable on that bike was brought to me broke. He had the same problem. Hope that helps. Let us know ,take about quarter inch off the cable, and everything will be smooth, then make up the difference with the adjustment. At your throttle end cables.

Happy to help. I would take a look if it's a vacuum Petcock that the Diaphragm is failing. I'll send a videoThank you for watching all your support Rick. Ride safe and have a great day. Take a look, kzfaq.info/get/bejne/bayfbLRqmLWuiH0.html

Happy to help. Any questions just ask. Thank you for watching and all your support. Great safe and have a great day.

Happy to help, You have it adjusted too tight. Put some play back into the cables. Test the twist grip and make adjustments from there. That should do it. Let us know how it works out. Thank you for watching and all your support Max. Ride safe, Have a great day.

Happy to help. Yes it is. 1965 L-78.396/425HP I've owned since 1982. Thank you for watching. And all your support. ML. Ride safe and have a great day. There is a video on my KZfaq page with me driving the car.

Happy to help. Any questions just ask. I live in the Treasure coast of Florida. How can I help you. Thank you for watching and all your support Herbert. Ride safe and have a great day. Love those Sportster.

Happy to help. The process is about installing the cables. Yes, those twist grips are my favorites. But everybody has their taste. Thank you for watching. And all your support George. Ride safe and have a great day. Just trying to help on the install.

Happy to help. Thank you for watching all your support Rich. Ride safe and have a great day.