Introducing the brand new Hartke Bass Attack 2 Preamp/Direct Box with Overdrive! Here's some of the tones you can get from this beast of a preamp!
The Bass Attack 2 combines Hartke's classic preamp/direct box circuitry and striking tone into a rugged, zinc die cast stompbox-style design. Its ultra-clean, flexible output stage and vast array of tone shaping controls include 1/4" and balanced XLR direct outputs and Hartke's legendary Shape EQ, Contour and Overdrive effect.
Leveraging Hartke's years of experience focused on the needs of bass players, the Bass Attack 2 provides unique tone sculpting capabilities. The stompbox gives players access to Hartke's Shape circuit, which activates a specialized preset EQ curve that can be customized using the Shape Frequency and Amount knobs. Players can also add a little extra color with the Bass and Treble knobs, along with the dedicated Contour switch.
The Bass Attack 2's Overdrive circuit provides bass players with creative control over effects ranging from subtle tube emulation to grungy fuzz. The Tone knob lets you determine the perfect amount of high-frequency growl, while a dedicated Mix knob manages the blend between distorted and dry signals.
Featuring a 1/4" parallel output for dry signals, a 1/4" effect output for your amp, and a balanced XLR direct output, the Bass Attack 2 provides flexible output options for FOH or studio recording consoles. Its direct output Pre/Post switch allows players to adjust stage sound without affecting the mix sent from the XLR to FOH. The Bass Attack 2 can also operate off of a mixer’s phantom power via its XLR jack.
Bass preamp and direct box with overdrive
Shape EQ circuit with Frequency and Amount control
Bass and Treble knobs with Contour EQ switch
Overdrive effect with Mix wet/dry control
XLR direct output with Pre/Post and Ground Lift switches
1/4" parallel and effect outputs
Powered via two AA batteries, AC adapter (sold separately) or phantom power
Rugged, zinc die cast stompbox-style design
nput Impedance: 1 Meg Ohm
Output Impedance OUT: Unbalanced 1k Ohm
Direct Out: Balanced 400 Ohm
Parallel Out: same as Input Source
Level: +6dB to -24dB
Tone Controls Bass: +/- 15dB, 30 Hz
Treble: +/- 18dB, 20kHz
Contour {Switch}: Fixed Mid Scoop Curve
Shape Frequency: 200Hz to 800Hz
Amount: +15/-25dB
Direct Output IN/OUT {Switch} IN: Parallel Input jack, OUT: Parallel Output jack
LIFT/GROUND {Switch}: Isolates the Input and Direct Output signal grounds
Power {in jack}: 9VDC center negative
Batteries: 2x AA - internal up-converter to generate 9v
For TABs and downloads become my Patron at: / dannysapko - Or tip me at www.paypal.me/dannysapko if you enjoyed this video!
All vocals and instruments recorded by Danny Sapko.
More Videos:
Follow: / danny.sapko
Like: / dsapko
Special thanks to my premium Patrons:
Bill Ramsay
Jake Banuelos
HARTKE | HARTKE BASS | HARTKE BASS AMP | HARTKE BASS ATTACK | HARTKE BASS ATTACK 2 | HARTKE OVERDRIVE | HARTKE PREAMP | HARTKE DI BOX | BASS DISTORTION | BASS OVERDRIVE | BASS PREAMP | 2017 | BASS PEDAL 2017 | NEW RELEASE