I don't need a collector version, this will do since I'm introducing my little ones to it

If Hasbro made a collector focused Megazord that articulates like the Transformers Combiner Wars Combiners, I would be all in on them!

I honestly dont mind that much, i kinda hope they do every megazord at least every main one. Its a cheapish alternative to rebuying the originals or the legacy ones.

As someone who wanted the megazord as a kid but couldn't afford it and wasn't paying for the high end stuff it could be worth getting to play around with relive a little nostalgia with my kids because they also like power rangers and I can justify it to my wallet

Those three separate packaging reminds me of the Zyuranger Deluxe Daizyuzin in which one option is to buy three separate packages back in 1992.

See for $45, I don't think it looks that bad. I kinda wish the sword looked better. All the gray plastic everywhere looks very cheap. But the chestplate actually looks pretty nice with the silver paint on the "teeth". Bandai often used stickers for that. The problem for me is that I've never had a Mighty Morphin Megazord before (only had a Shogun Megazord in the 90s), and every Bandai version goes for $300+ these days online. I'm talking Legacy, 2010, and even 1993! So if nothing else, I appreciate the fact that Hasbro made this.

They should make a Dragonzord and Titanus go along with this toy.

Love to see a Dragonzord version for this

Hope Hasbro make Dragon zord and Titanus.

Sorry if this was mentioned. I think tank mode, tyrannosaurus is supposed to sit closer to the ground with one more ratchet and the arms of the mastadon are supposed to be fully extended so it looks a little more sleek and tank-ish. Pterodactyl should also clip to the back mastadon legs with raised bit/clips around the blue and yellow painted bit. I like this set. Hopefully widely available in time, and for under 50, it's not a bad OG Megazord.

I'm going to buy this one and repaint the gray parts with silver paint

As far as the tank configuration goes (if you can really call it that...) The Pterodactyl is supposed to clip in between the Mastodon's legs on back, not resting on top of them. And the arms should be straightened out with the shoulder guards closed over the upper arms, while being positioned in an upwards angle. It really sucks that they couldn't have at least incorporated wheels at the bottom the Tyrannosaurus's feet as well as the Saber Tooth Tiger and Triceratops, at least in tank mode it'd be able to actually move across surfaces like the classic 90's figure.. Oh well I guess.

He's got more articulation than most megazords

I'm good with my Bandai Legacy Megazord, memories of Toys R Us

It would be nice if Hasbro did a Has Lab Megazord.

I feel like with a little customizing it will look great!

It's a little to expensive to be a little kid's toy (50 more or less with tax) and its to cheap looking for an adult collector, maybe it would be an alternative for the Super Mini-Pla customizer.

We need dino zord power now!

For 45 dollars this could have used more paint or at least some more stickers

As a collector who can't afford collection grade prices this will be great! Hopefully they do a Dragonzord and, god willing, Titanus

We dont need collectors version when this allows them to make all of the zords and even maybe different zord forms (i.e the movie exlcusives like the shogun looking rpm zord)

This may be cheap, but for someone like me who can’t afford resell, and was too stupid to get them legacy when it was sitting on shelves. This will be perfect. Lol. Thank you for this. Hopefully I can find this in stores.

As someone who never got the legacy stuff and doesnt wanna pay the second hand prices, I think I'm gonna grab this to put with my other dino team zords

I think this new Hasbro basic Megazord does work alright despite me wishing it had some method of proper knee articulation. Still prefer how the Beast Morphers Zords work regarding the value for money they have with their functionality, but this is still decent.

Would be good to see if anyone adds a bit of paint to these to see how good they can make them look

think of it as a 'practice run" for hasbro

Well i never got a megazord as a kid. So this will do for now. It is taller then my 6 in funko pop so that is cool.

The figures do what they need to for the price, not bad I like them a lot. No complaints.

It's sad that the most detailed of the set is probably the pterodactyl

Happy meal toy quality set.

So good to see

Bought the new Hasbro Megazord recently. He is a great looking Megazord for the price and not having to worry about him like an expensive collectable is also a bonus. Im getting the upgrade sticker set and will paint the sword to at least make him look a bit better.

It's not bad for its price. I actually wish that Hasbro would eventually release their versions of the Dragonzord and Titanus, as well as the other megazords and ultrazords of the whole MMPR franchise.

We need the power of REPRO LABELS! Now!

You will play the cheap one more rather than the expensive one. It's a good toy for desktop, where you randomly reach for it to transform.

when i buy this its gonna need a lot of paint work.... but i love a challenge, and i hope some third party company like reprolabels makes stickers

2:20,listen to the guy. He says the truth. 2:46,wow,color instructions?! Hasbro is kicking it. 11:05,uh...wow. Could be worst though. 14:36,pretty good looking. Well,the original Zyuranger toyline you also had to buy 3 sets in order to get Daizyujin: powerrangers.fandom.com/wiki/Zyuranger_(Toyline)#1992 So it's pretty cool they're doing that tribute.

Easy hack if you want your mega sword to have knee joints swivel the hip backwards and turn the leg of the mega sword the other way so so the reverse knee joint has a proper knee Joint

The Legacy was $60 ($45 USD) in Canada when it first released at Toysrus (which was a STEAL). It had stickers, which was unfortunate, but there was also diecast on it and the plastic quality was great.

I have the original 93 Bandai Megazord I had since was a little kid still in good complete shape and have it displayed with my other old zord sets (93 Dragonzord , 94 Thunderzords, 96 Zeo zords) I also have this 1 set in boxes and 1 built as the Megazord on my shelf. I will admit this one ain't bad for the price and yes they do make aftermarket decals to dress it up more but mine I used a thin tipped black permanent marker to detail the head, thighs and another red permanent marker to detail the 2 squares on the leg parts. Looks just fine!

I’ll definitely buy this and if they eventually make a collectors version I’d get that too

Legacy Megazord had stickers too and was just a retool of the 2010 release.

These are awesome!!!! I just came across these at Wal-Mart sadly no Dino Rex, this is almost identical to the 1993 Mega Zord downsized but the way it transforms and painted.

I'm not going to buy that but I do want 6-inch megazord and we getting 12-INCH ZEO MEGAZORD!!!!!!!!!!!

Finally! A Megazord I can afford lol

You could really spruce these up with a good paint job!

Clearly not Lightning Collection and looks a lot like the 2010 Bandai America mold (which was slightly retooled for their Legacy Megazord). But you know what, I'm getting it because there isn't a sticker sheet. I hate applying stickers to figures.

Can you tell if it has future proofing for the Dragonzord or Titanus?

Hasbro. You guys are experts in transforming and combining robots. This isn't a complicated robot design. There's no excuse for this kind of articulation. The zords and megazords are where you should shine!

Hasbro just hasn't provided any sense of a roadmap. Unlike other brands Bandai had been getting quite a bit of momentum going. We were just waiting on Shogun Megazord to generally conclude the MMPR era. There were all premium figures(with some major shortcomings here and there). Then you got SOC Zyuranger/MMPR S1 zords. Hasbro hasn't provided a premium offering. The LC props they've done have also not been up the visual quality of Bandai's offerings. So it's this sense of not knowing if Hasbro wants to do premium items and announce such things before we start investing in the lower quality things. You can pay $50 or pay $100+ going up to $300-$500 for a reseller. SOC Megazord production is over and the big online sellers are out of stock. There really aren't good alternatives. Want Spider-man figure, you have tons of options. Want Superman.........I mean Batman, then you have tons of options. To this figure, I would have loved it as a kid. The Legacy Megazord would look like trash today If I had gotten that version back then. Certainly would never have touched a SOC.

Not sure if you had the original Dino megazord but that is exactly how it was in the 90’s. Like same mold was used to shrink down for these. Lost the trunk to mastodon and wings to pink one and legs to sabortooth

With all due respect, I'm leaning more to this Hasbro's basic version of Dino Megazord over the collector's edition.

boii even if it was a low grade toy.. megazord is megazord still epic!

"God, the leg just looks like sh...cheap plastic!". 5:03 idk why that made me laugh hard 😂😂😂

I'm so glad I still have my old original release Megazords

A lot of the Hasbro ranger toys have been cheap plastic compared to the bandai toys but they tend to have much more paint detail than what you’d expected from the bandai toys

been wanting them to release the dragonzord, titanus and tigerzord for this line

We all know that this isn't going to be owned by kids. Kids don't even play with toys any more. I did get mine today at Target. It was the last set dont know if they'll put out any more. But I'm happy with it and it looks good next to my original Megazord.

Dude I'm not trying to be mean, but you made this figure look 10x worse than it is just because you didn't know what you were doing. Play with the toy before getting on Camera bro. I bought this figure as soon as it came out, and I was very disappointed in it's quality, however it's not near as bad as it looks in this video. Not trying to be mean.

you didn't build the tank right at all that's why it doesn't look good.

Idk if anyone has seen that thunder megazord that was shown overseas at a convention but I would like to see a version of this megazord with that kind of look from that thunder megazord

You've got swivels at the thigh, and below the knee. How would it look with the thighs rotated 180? The feet could be some kind of armor. Not accurate obviously, but you'd get proper knees.

So I got the BD15 stickers, definitely a big improvement. Honestly after seeing how Hasbro handled the Combiners in Transformers, I'm a lil disappointed. They've shown they can do combining robots with paint applications and no stickers.

Honestly this is the only type of megazord toy that should exist. Only ones that combine

I have been looking forward to this for months. I had checked my local Target since I saw some people reported that it was already out, but when I checked my local Target the past few times, they were not out. I also checked Wal-mart, even though I haven't heard of any news of them coming out there either, but as I predicted, Wal-mart doesn't have them, either. I did check online listings and there was a seller on ebay selling all three sets for 99 dollars, which compared to the 49 dollars it's actually sold for sounds like a complete rip-off for a new set. I had decided that every Sunday for the next couple of weeks, I'll check my local Target to see if they've arrived there and when they do finally arrive there, then I will make the purchases. I find it interesting how you have both the new Dino Megazord and an older release of the Megazord. 300 dollars is quite a lot for the older one, but given as to how you said something about the older one breaking, I think the newer one may be a better deal both in price and in stability. Having two of the same set of zords and having one set be individual and one set be combined together does sound like an interesting idea, but for me, I like interchanging them with having them be combined together and then split them apart. Right now I do that with my Uchu Sentai Kyuranger voyagers as well as with my LEGO Voltron. Sometimes have them be displayed combined and sometimes as the individual robots, and the same case will be for when I get the Dinozords. But this video did give me a few things to look out for for when I do get them. #AdaptKyuranger #PRRumorsTurnOutFalse

I have mixed feelings towards the hasbro power rangers line in general; while I love they come out with a lot of the villain figures, their rangers and now the zords are kinda horrible. I am buying their villain figures but skipping all the rangers and zords. To me, combining them with SOC zords and SHF Rangers, that is the best display for my ranger collection.

Kinda want it as a background thing so looks good enough may have to edit the mastodon head

i think it looks kind of cheap but dude, looks awesome for a custom, i hope i can get one, i have the marchon dino megazord of 1994 with remote control with light and sounds but this looks pretty nice on a great low budget way

There’s a lot of negativity around this release, but I’m very excited for it. I don’t have the expendable funds to throw at picking up an original, legacy or the small fortune for a SoC. I’m very happy to have an opportunity to pick up a set and throw up on a shelf for under $50.

This looks well constructed! Looks about the size of the 2010 Megazord which wasn't bad either

Compare it to the 93 original release. In 93, people would have gone nuts for the play-ability of these three. And for about, if not less than, the price of the deluxe toy at the time? You wouldn't be able to keep this on the shelves. You're comparing a steak from your local grocer, to Full blood Wagyu Tenderloin (one of the rarest, most expensive steaks in the world) and calling the local steak trash because it's not as good as the expensive one. Give it a fair comparison.

This feel like a cheaper version or the megazor they sold in he 90s

Looks comparable to the 2010, which also retailed in that $40-50 range.

You dont flip out the hands for tank mode the cannons peg into the holes on the bottom of the mastodon feet

you forgot to turn the wrists around

I’m so jealous of your soul of chogokin megazord!

This is right at my budget🤗

This is a great Dino Megazord for $45. I don't feel like it looks cheap. It can be best describe as basic. But you can display as dino zords or Megazord; what else can you ask for?

When the Legacy Megazord is released here in the Philippines, If I am not mistaken, it was around P5,000-6,000 PHP which if you convert to USD it is around $100USD-120USD. It is very expensive here in the Philippines. Also, the Legacy Thunder Megazord, it was retailed around 10,000 PHP- 15,000 PHP ($200USD-$300USD) if I am not mistaken and that's a lot of money. I am so eager to get one myself but I have no money at the time for I am only a high school student and that kind of money is almost the same as my tuition fee so I feel bad about that. Now that I can afford to purchase one, the availability is impossible and the price is doubled, HAHA I wish I had the money at that time to purchase one. Hasbro released a lower quality version last 2020 and the price is not reasonable at first time it was released. For 1 pack of zord it cost 1000 PHP ($20USD) which is 3000PHP ($60USD) for the whole set. But now, I purchased it for half the price, 1 set for only 1400 PHP ($28USD) and I think it is a great buy! my son loves it and most of all I feel like I am 10 years old again. HAHA in fact I am the one that opened the package even though it was intended to be a birthday gift for my son. I do love it. The Hasbro Megazord is not a bad Megazord in my opinion. Coming from a non collector, it is a great buy. It brings nostalgia. I can't complain with the price I paid however there is still a lot more to improve for the product specially the hollowness and the lack of stickers. I have contacted a local dealer hear in the philippines for a decal set which cost 250PHP ($5USD), I think it is almost the same as BD 15 decals and it does bring out the best in the megazord. It is now detailed with the sticker set.

I might pick it up, I'm also a little frustrated that it appears to be worse quality than the Super Mini-Pla release

So I just got this toy on special from Amazon as a complete set and the only complaint I had was the lack of articulation in the head and knees. Which I expected to carry over from the now discontinued super mini pla model kit. But it is still an upgrade compared to the original/legacy dino Megazord.

For the price this isn't bad.

Just to give you a recap on the MMPR legacy zord releases and prices when they first dropped. The First 2013 released Legacy megazord die cast was $79 / $80 bucks. But it had a very bad leg joint stability problem when combined into the mega-dragonzord. Dragonzord was relased in 2014 along with the legacy dragon dagger both for 80 bucks as well. Titanus was $200 but the priced dropped momentarily to $150. White Tigerzord and Saba were released in 2015 both for $80 bucks also that same year. Both the megazord and black / gold edition were 80 to 99 bucks. both of those megazords leg stability issues were fixed tightening them. 2016 was the legacy thunger megazord for 200 and the legacy blade blaster for 80. and also the legacy red ranger helmet for 100 bucks and the legacy ninja megazord for 99 bucks as well.

No it clips on the feet of the mastadon. Not hard to figure out since it's for little kids

Where can I find these?

It sucks that I can't find the others at my target, I did get lucky when finding the Mastodon and Pterodactyl, So now I'll just have to wait for the other 2

Not even a Rangers Fan and I'm tempted to get this guy because I think he would look good with my Godzilla's

I was about to order from Amazon in a couple of days until i saw the end transformation of Megazord. It seems to be suffering from malnutrition. Thanks for the full review.

I bought this and they literally put the Mastodon M stickers on the wrong side so there's no Ms on the front. They're on the back. Other than that, it was fun to put together

I rather have this than an expensive diecast version. Plus, I wish Hasbro would of given us Dragon Caesar to go along with this version of Daizyujin.

I hope Hasbro make other zords of this kind

There’s package art out there for all of it in one box, I’m hoping to wait for it

I hope they make the dragonzord.

This looks great

Anyone else hoping for a dragonzord like these?

Stop complaining about the articulation because it has the most articulation of all the mass retail Dino Megazord toys!! (better than the OG & 2010/Legacy versions who're total bricks) You're just totally spoiled with the Soul of Chogokin GX-72 Daizyujin. *Hasbro's Dino Megazord actually has almost the exact same articulation as SoC GX-72 Daizyujin minus the head, wrist, and ankles!!

Just snagged mines today and its AWESOME! A definitely cheaper option over Deluxe and Legacy tho. Hope they release the Dragonzord to combine with it to make Dragonzord Battle mode!

The Hasbro Version Megazord It Look Cool

I'm so looking forward to this! I see nothing but opportunities!

I hope and pray that hasbro does one collector megazord per season. Every season deserves some love after being heavily neglected by bandai and even thought mmpr is the most popular, im sure megazords would still sell if they were from something that isnt mmpr