Have I Found the Best Way to Build a Neck Through Guitar?

Have I Found the Best Way to Build a Neck Through Guitar? | CNC Woodworking

Рет қаралды 9,835

Жыл бұрын

The biggest challenge I've had in the past building neck through guitars always came down to gluing the body and neck together accurately. In this video I share my new method to building neck through guitars and also how my ShopBot PRS Alpha has made the process even easier!
This project is sponsored by my good friends at BESSEY Tools! Their quality and product innovation is outstanding and is why they're a staple in my shop!
🎥 What to Watch Next:
CNC Woodworking Projects - • CNC Woodworking Projects
➤Thank you to these partners for supporting my channel and offering DISCOUNT CODES FOR YOU!! (affiliate)
Coffee breaks powered by Fabula Coffee! (code: WoodshopMike to save 20%) - bit.ly/3DVVEmD
Carhartt carhartt.pxf.io/15v3EB
StarBond CA Glue bit.ly/2UOXOQ8 (code: WSM15 to save 15%)
ISOtunes bit.ly/2zyp8sY (code: WSM10 to save $10)
MagSwitch bit.ly/3xPn0IO (code: WOODSHOPMIKE to save 10%)
SurfPrep Sanders bit.ly/2SV1AWk (code: WOODSHOPMIKE10 to save 10% )
Bidwell C-Channel & Mounting Plates bit.ly/3dFKA3T (code: WOODSHOPMIKE to save 10%)
Rampa Hardware bit.ly/3dFKA3T (code: WOODSHOPMIKE to save 10%)
Mullet M5 bit.ly/3dDQqCL (code: WOODSHOPMIKE to save 10%)
Wall Control bit.ly/3RaA0j4 (code: WOODSHOPMIKE to save 5%)
➤Materials: (affiliate)
Hardwood of choice
Titebond - amzn.to/38C9tFh
StarBond CA Glue (code: WSM15 to save 15%) - bit.ly/2UOXOQ8
Painters tape - amzn.to/2TQd7aL
➤Tools: (affiliate)
ShopBot PRS Alpha - www.shopbottools.com
MicroJig Pushblock - bit.ly/3DddBh7
Bessey Trigger clamps - amzn.to/33ZXn6s
Bessey Parallel clamps - amzn.to/3COLPpZ
Table saw (new version) - amzn.to/2PenpeF
Jointer - amzn.to/2sto5ai
Planer - amzn.to/2Sdc8xJ
Dual Drum Sander (similar to mine)- amzn.to/3aAKkgb
Miter saw - amzn.to/2PfDqBe
Freud glue line rip blade - amzn.to/33DBkCb
Freud sliding mitersaw blade -
SUBSCRIBE: bit.ly/2OEjCKH
SUPPORT: / woodshopmike
FOLLOW:
Instagram - / woodshopmike
Facebook - / woodshopmike
Twitter - / woodshopmike
Pinterest - / woodshopmike
#guitarbuilding #luthier #cncwoodworking
1 Timothy 1:15-17

Пікірлер: 36

@Repsolwhite Жыл бұрын

my heart definitely stopped the moment I saw that spindle travel over the fret board too! Well done Mike!

@WoodshopMike Жыл бұрын

🤣🤣🤣 I checked the tool path soooo many times! Thank you! 😃

@michaelmenkes7233 9 ай бұрын

not bad for first time. Its all about order of operations. Hot tip: fretboard goes on AFTER you've set the wings to the neck and carved out the body. This also gives you the ability to adjust the heights if things didn't align.

@WoodshopMike 9 ай бұрын

Thank you! This isn't the first guitar I've built, just the first one I've done a video on. Thanks for the tip, I've seen folks do it both ways, but I understand the benefits of your approach. Thanks for watching, have a good one

@BoneheadGuitars 9 ай бұрын

Awesome. Someday I want a CNC machine.

@WoodshopMike 9 ай бұрын

Thank you! The CNC is definitely a fun tool to have in the shop 😃

@jeffhampton6972 11 ай бұрын

Holy heck, this is great! I'm a hobbyist guitar maker who's looking to get more into this, and you video was both inspiring and very informative. Thanks!

@WoodshopMike 11 ай бұрын

Thank you very much! Happy to help if I can👍👍

@timothycreasy2161 Жыл бұрын

I never knew making an guitar required so many steps and so much time !! But it is coming along nicely. 🤘✌️

@WoodshopMike Жыл бұрын

There are much easier styles to make, but that's not how I roll 🤣. Thank you sir! (Just wait until I get into the next guitar build 😃)

@EdBender 2 ай бұрын

I never saw the need to align body and wings. Just cut the wings as big rectangles, glue them to the sides of the body, and THEN shape the body as a whole. As for gluing the fretboard and placing the frets so early: a pro luthier once told me that should be last on the list. If you screw up ANYTHING else in the process, you lose your fretboard (usually expensive wood), your frets (can be expensive too if good quality SS) and most likely your trussrod will be difficult to recover. In other words, you lose all the work done to the neck if something goes wrong with the body. Sounded smart to me. The only way to salvage that would be to dump the neckthrough idea, cut the neck out, and do another regular guitar with that neck. Good video. sometimes I wish I had a router, but on the other hand I build for hobby, so what's the sense in doing cookie-cutter guitars to me? The only PITA is neck shaping, a router would be good for consistent neck profiles. Wish you luck!

@billboy7390 Жыл бұрын

Very impressive worK with the CNC. You are a very good at designing what will be one nice guitar.

@WoodshopMike Жыл бұрын

Thank you! It's been a fun challenge thinking through the process. I've built a few other varieties of this guitar (semi-hollow and carved back and top solid body) before having access to a CNC for this one. They've all been fun builds😃

@TyroAbecedarian 2 ай бұрын

Fantastic work!. I love the project. I have a CNC as well sot it's great to see how you create such a nice project. I am planning out a neck through semi-hollow. I would love to hear any tips you might have

@WoodshopMike 2 ай бұрын

Thank you, I'm glad you loved the project! I built this same guitar as a neck thru semi-hollow, but the top and back were both drop tops so you couldn't tell it was a neck thru from appearances. It's a bit more involved, but only in the sense that you have to double check a lot more 😀 Is there anything in particular your unsure about with the process? Regards, Mike

@markhendrix745 Жыл бұрын

Would love to see you and the wife doing some more christmas projects

@WoodshopMike Жыл бұрын

Those were fun. Not sure when we'll get back to those though😃

@markhendrix745 Жыл бұрын

@@WoodshopMike no time better then the present

@corywillis3560 7 ай бұрын

Do you have the next step in this journey posted by chance? Id love to see the finished product

@WoodshopMike 7 ай бұрын

I sure do! It's the one that's mentioned at the end of the video 👍 Here's a link to the full playlist for the project kzfaq.info/sun/PLsy-TxTOlb0aKZszrzG8bj3gGtvV9JvnQ Cheers!

@robertmizek3315 Жыл бұрын

Nice approach Mike. I’ve never seen the dog-bone method used before and it’s really innovative. There are a whole bunch of opportunities to use it besides guitar bodies. Your whole process approach is extremely well thought out and your work holding choices are perfectly suited to maintain positional accuracy and allow aggressive cuts if desired without worry of the body shifting. Bob Mizek, Roberts Luthiery

@WoodshopMike Жыл бұрын

Thank you so much Bob! I really enjoyed thinking through the work holding and operational sequences. Cheers!

@robertboughton11 Жыл бұрын

Nice job on the guitar

@WoodshopMike Жыл бұрын

Thank you so much!

@Tarheelfoodie828 7 ай бұрын

Man you’ve been doing this since Highschool. You’re amazing at what you do!! Way to rep J-Rob and Cab Co. in a good way!

@WoodshopMike 7 ай бұрын

Thank you! 👊👊

@mareDBS 8 ай бұрын

To me, the most interesting part is how you successfully align the guitar (front and back sides). I need to learn how to do this on Shaper Origin

@WoodshopMike 8 ай бұрын

Thanks! It made assembly so much easier😃. The shaper origin is a very cool tool, I'm confident it can handle this kind of task!

@T0tenkampf Жыл бұрын

Pretty interesting...makes me wonder if using an actual bowtie shape can be slightly offset from the cavity and thus be used like a sort of draw pin / wedge clamp to really suck the sides into the neck. Well, I know it can be done, I guess the question is if its worth the effort

@WoodshopMike Жыл бұрын

Thanks! I'm pretty happy with this solution. It sure beats babying the glue up and hoping nothing slips outta place! I had pretty good clamping from the dog bone shape, not sure how much more a bowtie would help to lock things down, but it certainly wouldn't hurt.

@lokispeicher8103 7 ай бұрын

Truss Rod?

@WoodshopMike 7 ай бұрын

Yep there's one in there! I showed that in the neck making video👍

@HoshijiroTS336 9 ай бұрын

I'm confused. I thought neck through guitars were made from one single piece of wood.. Neck and body both one piece. So the same piece of wood goes all the way through the guitar. Hence the term "neck through".

@WoodshopMike 9 ай бұрын

The neck does go all the way through the body👍

@gordontall2441 28 күн бұрын

Yeah I will never be able to afford any of those machines.

@WoodshopMike 19 күн бұрын

I've been slowly building my shop out over the past 20 years, buying used tools of craigslist and upgrading as I could. It's been an endeavor for sure but even without my current setup this guitar can build built with a router, bandsaw, and a couple hand tools. That's how I built my first 4 guitars.