Hayward Aqua Rite Salt System Install, Salt Cell for Pool Salt Systems Installation

Рет қаралды 43,877

4 жыл бұрын

In this video I will take you through the process of installing the Hayward Aqua Rite salt system into my pool. I am using the largest salt cell available from Hayward AquaRite. The cell is a T15 cell. We will install the salt cell, flow switch, control panel and re plumb all the parts of my current pool filtration system. The Hayward AquaRite system is by far my favorite to use for making your pool a salt based pool. Salt systems are a great way to keep maintenance and pool chemicals price down. If you have any questions please let me know. If you enjoy my content, please subscribe. I would love to have you be apart of my channel. Thanks
Please Subscribe to my Channel if you like my content-- kzfaq.info
🚪Check out my Website for more Projects. CWKshop.com
🚪Amazon Associates Product Links--
👉Hayward Aqua Rite Salt Cell -- amzn.to/2ECXii2
Products I Use:
👉SONY HX80 Camera-- amzn.to/2LakC6I
👉YETI Microphone--amzn.to/2zkUzqM
🚨DISCLAIMER: This video and description contain affiliate links with Amazon Associates Program. As an Amazon Associate I earn from qualifying purchases. When you click on a link I receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

Пікірлер: 49

@installer18yrs 2 ай бұрын

The 12 inces of straight pipe is before the float switch , not after. The cell can be counted for the 12 inches. Reference the Hayward installation guide Swim Pure Plus page 11.

@Ingeanous 2 ай бұрын

Good catch, just put in a CircuPool.... they have similar instructions. I would think the flow switch would last a little longer before the cell because it wouldn't be exposed to as much chlorine... although back flow is a thing if your not running a variable speed pump 24/7.

@alexnone3374 Ай бұрын

@@Ingeanousit is supposed to go before the cell and the 12 inches is supposed to be before the flow switch. This guy installed it backwards.

@matthewmiller2120 Жыл бұрын

This was excellently done. I have to install this system and you left nothing to my imagination. Thank you so much!

@phjohnso 3 жыл бұрын

Very Helpful - thank you!

@ChasesWKshop 3 жыл бұрын

You’re welcome.

@jmrandom194 2 жыл бұрын

Good video, but you should only twist 1/4 turn when gluing pvc. Also, you aren't saving power when using half the amps. Power (watts) is voltage x amp. Twice the voltage (220) with half the amps is still the same power. And electricity is billed on the kW-hour...so no cost savings. But still good video. This will be useful when I install the same chlorinator in my pool this summer so thanks!

@russoloco1662 4 жыл бұрын

We use Christie's Dry Hot all in one. 0-110 temps hasn't failed me yet.

@joejim2963 10 ай бұрын

Thanks for doing this video. I’m just starting my pool build and am installing this unit too. Can you expand how you brought your 220v service to the panel. Is shared from your pump 220v service? If so does it split at a junction box, timer or other?

@WaveMan138 2 жыл бұрын

This is awesome, thanks. One question - the Hayward manual specifies that the 12 in piece needs to be BEFORE the switch, not after, and if the switch is placed right after the salt cell, the salt cell counts for the required 12 in. Did I mis-interpret something?

@ChasesWKshop 2 жыл бұрын

That’s a good question. I think it might be because the water coming out of the cell may be more turbulent since it’s going through the grid of the cell. Could possibly be something totally different than that too. They could have possibly changed the manual too. Hope this helps bud. Thanks for the comment!

@jmrandom194 2 жыл бұрын

Jeff, you are correct. In this video, what he called "the 12 inch piece" was not needed. I mean it might've been needed simply to get everything to reconnect, but not in terms of the Hayward requirement. Reason being, as you said, if it's AFTER the turbo cell, then the turbo cell counts as the 12" piece. Basically they (Hayward) want to ensure no bends in the 12 inches leading up to the flow sensor to reduce turbulence.

@russoloco1662 4 жыл бұрын

New pad has a pool. Movin' on up.

@ChasesWKshop 4 жыл бұрын

Jed Eropkin the old house had one too and I installed one of these after first year. I can keep a pool clear unless I use one of these lol.

@heathermctaggart5415 2 жыл бұрын

Where do I find the MSP id - our professional installer didn't tell us and I'd like to use the app

@macieowenmorgan5448 Жыл бұрын

I am about to *attempt* to install this on our pool. I never write reviews, but your video was so helpful that I just had to! I’m glad they told you about the audio. I connected to a speaker to solve that problem. 😂

@ChasesWKshop Жыл бұрын

Awesome! You’re welcome. Glad I was able to help you out. The audio was bad haha but it was the first time I had recorded anything outside. In post I was going to overdub it but it was impossible haha. Thanks for the comment!

@hanskronheim3099 2 жыл бұрын

I had to turn the volume all the way up to hear you but the commercials blew my ears out. Very difficult to understand some of your words due to you personal volume. Otherwise great instructions. My system is arriving today. 24,000 gal pool.

@ChasesWKshop 2 жыл бұрын

I’m sorry. I’m learning something new everyday making videos lol. Glad I could help you out though. Thanks for the comment. Hopefully o can make things better in the future.

@Pinkielover 2 ай бұрын

they all come with the 2 inch

@AKelly1337 2 ай бұрын

How long does it take to get an accurate salt measure? I just installed a new unit a few hours ago and it's reading low.

@ChasesWKshop 2 ай бұрын

I’m not 100% sure but if it doesn’t steadily increase after about an hour I’d add more salt to your pool.

@marvinisit 2 жыл бұрын

Hayward's video says that the cord on the chlorinator should come out of the bottom.........

@keramiz3072 2 ай бұрын

Is this a system we can plug in??????

@tylereves4925 Жыл бұрын

What did you use to punch a whole through the box in order to put the ground through

@shawnhall2841 3 жыл бұрын

Isn't the cell supposed to be vertical? I'm no expert though.

@ChasesWKshop 3 жыл бұрын

Hey bud, I’ve never seen one that way but that doesn’t mean it can’t be done. I went by the installation instructions and it didn’t mention a vertical direction. All of the diagrams showed it in a horizontal position.

@BryanMakesThings 2 жыл бұрын

can't hear the audio

@ChasesWKshop 2 жыл бұрын

Sorry bud. I’ve had some others say that. I’m still learning on making videos lol sorry for the trouble. Ear buds may help out. Thanks for the comment.

@fincarosa6767 Жыл бұрын

Me either. I couldn't even watch it

@KGSWIMMINGPOOLEXPERT 2 жыл бұрын

if u use salt filter system is it means I don't need to put chlorine?

@ChasesWKshop 2 жыл бұрын

Yes. You may have to add shock occasionally but it’s just to speed up the process.

@KGSWIMMINGPOOLEXPERT 2 жыл бұрын

@@ChasesWKshop how about the piping?is it the same in traditional pool? Just after in the filter is the salt water machine?

@ChasesWKshop 2 жыл бұрын

@@KGSWIMMINGPOOLEXPERT yes. It would be on the discharge side of your filter right before the pipes going to the pool jets.

@KGSWIMMINGPOOLEXPERT 2 жыл бұрын

@@ChasesWKshop ok ty ..

@KGSWIMMINGPOOLEXPERT 2 жыл бұрын

@@ChasesWKshop do u have a video about the first steps of how to get the right balance chemicals if it's a new water..and what is the color of water if it's salt water system..