Hayward Pool Automation - Pro Logic & Aqua Plus Controllers

Рет қаралды 46,326

4 жыл бұрын

This covers automating your Hayward pool equipment to control from a Computer or Mobile device. This is specific for the Hayward Pro Logic and Aqua Plus pool controllers.
Who I purchased from online:
www.swimmingpoolsupplyusa.com/
My Model:
Hayward AQL2-BASE-RF Wireless Base Receiver $155.00
Hayward Aqua Connect Home Network Device $399.00
Direct Contact:
how2togo@gmail.com
Disclaimer: Due to factors beyond the control of “How2ToGo”, We cannot guarantee against improper use or unauthorized modifications of this information. “How2ToGo” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “How2ToGo” recommends safe practices when working on vehicles, properties and or with tools seen or implied in this video. Due to factors beyond the control of “How2ToGo”, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “How2ToGo”.

Пікірлер: 38

@touchofclasssolutions5526 Жыл бұрын

That kids uncontrollable 😂😂😭😭😭 I feel you definitely appreciate the video. Entertaining and informational 👍

@kellystclair1 3 жыл бұрын

I had given up on ever getting my Hayward ProLogic Remote Control Pool System working again! Thank you for this video. It should be linked to the Hayward Corporate website!

@dennisheimann6523 4 жыл бұрын

Excellent, thank you for the explanation... going to do the same

@SahRobbie 4 жыл бұрын

Super helpful video, thank you!

@michaelekrot1732 2 жыл бұрын

I have a Hayward AQL@-SS-RF Wireless Floating Remote for my E Command 4 but I do not know how to change the color of the LED lights using the remote, I can easily turn on and off.

@ujustswim 2 жыл бұрын

You don't have to drill new hole for antenna you're right that is a knockout. You just have to gently hit it harder be careful not to hit the board maybe bend off tab with needle nose on the inside

@jasonastacio4187 4 жыл бұрын

How does this compare to the omnilogic?

@georgeisawesome 3 жыл бұрын

Anyone know how to find which version i have? The buttons on the panel itself don't work and my remote battery is dead. How can i find out if i have version 4.20 or higher?

@CcPhantastic Жыл бұрын

Hi uou didn’t include step5 which is add MAC address to account. I did everything as stated all green lights good but when I login to my new account and try to add the pool using the MAC address at bottom of aqua connect home network it says MAC address not found 😠 help please

@DavidMosby 2 жыл бұрын

Oh, $500? I will walk out to the pool. Thanks anyway. Good video.

@how2togo 2 жыл бұрын

That's a good option. :)

@TaylorHandyman 10 ай бұрын

How do you know what version of software you have? Version 4.20 and up?

@barryhadar4486 4 ай бұрын

Where you bought the products from?

@scottb9109 Жыл бұрын

Your setup looks almost like a mirror image of mine... I wonder if we had the same builder (I'm in Riverside county as well)... QUESTION: do you have to turn the handles to go from pool to spa? I didn't see any electronic actuators on your valves??

@how2togo Жыл бұрын

Yes I have to turn there handles

@scottb9109 Жыл бұрын

@@how2togo Ok thank you.. That's what I thought.. looks like I'll have to get a couple actuators since I'm tired of reminding my family to put the valves back.. LOL

@tparisi88 3 жыл бұрын

What if you have a new base station plugged into the board but Teach Wireless doesn’t show on the menu?

@robertgoldmark6617 2 жыл бұрын

The base station is not communicating with the controller. Problem is with the main board. Try plugging into another female plug below the one that is used now. All three are connected to control panel.

@yiannitrakas5582 Жыл бұрын

Can I pair this to their older type of antenna with an older system?

@how2togo Жыл бұрын

Tippy should check with the manufacturer

@salraso1389 2 жыл бұрын

Question…. My pool heater is not controlled by my hayward mother board… would this be a problem to get the heater to work with the wireless system?

@how2togo 2 жыл бұрын

Yes, I would think so. There wireless is just communicating to the main Hayward controller.

@rcam4285able 2 жыл бұрын

Thanks you son much for the info. How do you get the username and password to log into the app? Thanks

@ericlundgren5962 3 жыл бұрын

I already have the wireless antenna because I have a wireless remote. Can I use the same antenna? (I am trying to get rid of the broken remote FYI)

@harryk472950 3 жыл бұрын

i have the same question. did you receive a response?

@how2togo 3 жыл бұрын

You should check with your pool equipment manufacturer and verify part and model numbers. I'm showing how to hook this up from nothing to controlling with your phone.

@HEAVENLYTUNESDJANGEL 3 жыл бұрын

Hi, I have two hayward SP0527LED100(120v) lights with a switch and is pain in the ass to keep going outside to turn on and off. Can you guide me in the right direction on what to get. I'm not ready to spend the big money on the Omnilogic or similar. All I need to do is lights for now with the phone.

@enduroeveryday1325 4 жыл бұрын

Link light is for when it has an ethernet cable plugged in and connected.

@theflyingpenguins876 2 жыл бұрын

Great video! Got everything hooked up and can control through the browser using the last 3 digits of the mac address. I set up an aquaconnect account and when I registered the device using the mac address is said the "This unit is already registered! The request has not been processed." I bought the unit used off Amazon. Any idea how to unregister from the previous account?

@how2togo 2 жыл бұрын

Very nice. Not sure. There must be a way. Maybe their support line can help.

@theflyingpenguins876 2 жыл бұрын

@@how2togo I sent them an email with screenshots. I'll call them tomorrow and let you know what I find out.

@benjaminshafran7063 2 жыл бұрын

@@theflyingpenguins876 what ended up happening? I bought one used off of Amazon also and am having the same problem

@CcPhantastic Жыл бұрын

Hi mine was new but when I add MAC address to my new account it keeps saying MAC address not found but I did all the steps correctly and the green lights all work

@bbrewer609 2 жыл бұрын

Hayward has really dropped the ball in the last few years, I'm running Hayward Aqua Connect with Prologic 8 relay system and since their servers crashed a few weeks ago the system is intermittent at best if not unusable due to poor response. They have a new OmniPL Upgrade Kit that would help but its currently unavailable. Come on Hayward you're better than this, make the AquaConnect servers faster or release the PL Upgrade kit. It might be time to switch over to Pentair. Anyone looking at Hayward right now be very careful, consider Pentair