Shououts will be next video! You can still comment on last video for a chance to win a shoutout.

It amazes me how many people sell their bikes without even washing/detailing it.

That motor has either rod knock, bad crank bearings, or both. it’s ready to blow up

*DAMM* I really like these 125s, also the graphics look sick! Thanks for the great upload, keep up the great work!

Riding in flip flops with no front sprocket gaurd... Brilliant!!! Fast way lose a toe

I’ve been watching ur videos for so long and it gives me a good vibe cause I started watching when I got my 85 and I was so happy ahah

Is there things you go look at and don’t buy often or do you usually buy what your going to look at?

@2vintage The front tire is a Kenda if you noticed at 0:59

Watching your channel has helped me to gain the confidence to do my own video on my youtube channel of my 1974 Kawasaki G5 100 everyday I look forward to more content keep up the good work

Zero exhaust smoke,running way lean,and you got a nasty engine noise,that thing has about a tank of fuel to go before it blows up

Great video man, keep up the good work!

Chuck is so chilled his got his slippers on testing the bikes!

You should switch out the FMF setup to Charlie's 125, that's where the power is coming from.

The seat on the bmw is an old ridged frame seat with a steel Base someone has flattened out n stuck on it.

You can get rust out of the pipe with Steel wool. I did it on my banshees pro circuit pipes and now there mint!

For the rear fender take a razor blade and scrape it. Don’t have the blade face you though, have it face the seat, hold it around 45 degrees and scrape toward you. If that makes any sence. I used it on my 1984 Yamaha tt600 plastics and it looked brand new

You can clean those plastics up real nice with a Mr. Clean's magic eraser

Yeah something ain’t right with the bottom end, sounds like piston slap or rod knock either way you better off it quick.

Sounds like the bottom end In that (rod specifically) is starting to go making a noise that worries me about it also might just be the video though my old 4 stroke sounded like it had a bad valve tick in the video but in person it ran mint

You should really buy every cr model in the same year, it’d be sick.

You obviously buy lots of bikes,but can you ride them ? We never get proper riding videos

Best plastic restorer ive found is wet sanding with different grit steel wool then a good buff!

Can the V neck get any lower?

Hey man I gotta question. Do you think it’s worth $1,000 I’m about to get a 99 125 for $1,100 and its perfect. So just curious

Use purple power on the seat it will come right out you can find it at auto zone

So i came across a Husqvarna 250 WXE it needs a top end rebuilld. The dudes asking 750 is it worth it to talk him down at all?

Hey 2 vintage so my bike runs but it won’t hit the power band. It’s a 98 rm 125. It wants to go soo bad but it just can’t. Idk what to do?

Replace crank bearings bro

1996-1997 cr125s were the best motors you could get for cr125. There’s a really nice 1996 cr125 on cl rn you guys should get it.

Lol im gonna go pick up a ke 100 tomarrow for 250 that just needs a carb rebuild and a clutch cable its been comverted to pure dirt

You guys are living good man . Wow

The pipe was a power core2 pipe not shorty?

I'm not a mechanic, fellow is selling a 1999 xr250, says no compression, what does it take to remedy no compression, costly or not, worth my time or a pain in the ass to fix?

Driveway looking minty!

The rod of that cr is going bad

Hello from Denmark, Nice Honda! Seems to rip Real good!

Avoid the first two years of the aluminum frame, it was too stiff. 1997-98 as i recall

Where in Wisconsin are you guys? I'm in Milwaukee. Pretty badass channel guys. I have a pretty sick 2 stroke Honda Elite SR that's built if you ever want to check it out for a video or something. ♥️

These guys grind my friggin gears. Why am I still watching

Motor is a ticking time bomb, also jetting is off if sounds like.

You don’t hear piston slap, you don’t hear a bad crank. Your hear a vibrating Kickstarter and a loud power valve. All late 90s Honda 2 strokes sound like this, doesn’t matter the condition, they are noisy

Where do you find all these bikes?

peepin that banshee in the back 😏

Sharp looking bike.

wow... look how young chuck looks on this ..only been 3 yrs

That’s all it is, is a $1,000 bike maybe motor sounds ruff

its 10 years old what do you expect

I saw this on Craigslist and was waiting for a video

You always find killer deals on some good bikes

Where do you get all that money to buy your bikes? Your parents I’m guessing

Nice Honda cr125 when you guy's doing a video of the banshee ?

Whete do you guys sell uour bikes??

Got justin bieber riding in flipflops lmao

The lever position on the front brake makes my head hurt.

Rod knock?

I hear piston slap

Use mothers to clean the rust off the pipe

You can clean the dirt off of the fenders with gas

For faded and scratched Plastics use a blowtorch and do not keep it in one spot spread it around and you'll watch it all disappear

Super clean degreaser will clean it all off.

you can get that rust off the pipe using steel wool pads

Get that BANSHEE tuned up...and throw a smaller sprocket on baxk.. You'll have a BEAST 90MPH EASY..DO IT ..Noce Honda ..PEACE

Cranks gone I can hear it, my cousins cr 125s crank went and sounds just like that

Where can I buy these graphics?

ThAt bike will blow up very soon by how it sounds

chains too tight going to turn it into a welding rod when you compress the suspension... it should have a small belly in the middle section...

That thing sounds clapped! For someone who buys alot of bikes and u cant hear that!!

I need help I have only rode a crf100f and I want a cr250 I’m 15 and about 5.10 and 145lb should I get one ?

Lol I just got 1999 kx250 for my frist bike and I love it I just turned 14 my dad said if you learn to ride this you will be able to ride anything

That thing is sick

This bike needs a complete engine rebuild more or less I'd pay 950 for it tops not a dollar more put 600-700 into it then you would have a nice bike

Awesome vid

This bike doesn't sound right at all starting price 850

I am 5’4 could I fit a 250 or pretty much a full size bike ?

that bike is not running good its got a rod knock and ready to blow

Real dirt bike riders don't wear flip flops

Tbh I wish I could do what you do and have all these bikes i have one with a blown engine

That bmw looks scary

You guys should get a Honda grom

2vintage chuck needs a 250 and u should get a 07 or a yz250 05 or newer

GOD bless spread his word!

Take a magic clean earaser to the back fender

It's a nice bike like the fmf graphics

It sounds like a rod has gone bad on that CR

whens the next rd350 vid?

All cr 125 in my area are $3000

Ive been watching your channel on and off for a couple months now and decided to subscribe and turn notifications on for your vids.. I like what you guys do buying and selling bike's... The only thing i DO NOT LIKE is when you always say how much u actually paid for the bike and then how much your trying to get for it.. I mean u seem like a honest guy but there is no reason for you to say the price you paid seriously.. Other than that ur channel is awsome and I'm really hoping for alot more banshee videos asap

Try and find a crf150r please.

That cr125 definitely has a knock

He can’t be stingy he got every bike in the world

Love honda

that 125 needs a top end

People saying piston slap it’s the kicker hitting the pipe

Yep major Conroe play

Have the exact same grips on my cr125r

Why do you wear flip flops to ride ?

Shout out dude if he don't want it will u drop of in Salford Manchester UK lol 😁

Top speed on the ke125!!

Sounds like some piston slap

Gas might get that reer fender stuff off