HEAD TO HEAD - RECIPROCATING SAW - METABO vs MILWAUKEE Super Sawzall (SSE 18 LTX BL vs 2722-20)

Рет қаралды 882

3 жыл бұрын

This head to head comparison is between the Metabo SSE 18 LTX BL reciprocating saw and the Milwaukee Tool M18 FUEL Super SAWZALL 2722-20
A break-down of the times:
| 2x10 | 4x6 | Galvanized Pipe | Cast Iron Pipe |
-------------------------------------------------------------------------------------------------------------
Metabo | 8.64 | 11.0 | 12.24 | 1:48.54 |
Milwaukee | 13.36 | 15.24 | 22.72 | 49.72 |
Be sure to subscribe and turn on notifications so you'll know as soon as the next head to head challenge is posted!
=============================================
/ someguywithtools
For more behind the scenes and day-to-day content check out my Instagram page!
=============================================
www.someguywithtools.com
Check out our website for in-depth reviews and high-def pictures of all tools I get my hands on! Striving to provide honest and straight-forward reviews and opinions - as if you're hearing an opinion from your coworker while on the job site. Less press release regurgitation and more trustworthy hands-on experience!
=============================================
GEAR I USE:
JOBY GripTight PRO 2 GorillaPod bit.ly/3fFWibq
JOBY GorillaPod Arm Kit bit.ly/3nSD4lC
JOBY Wavo bit.ly/363Vzxg
JOBY Wavo Mobile bit.ly/2V2M3Ek
=============================================

Пікірлер: 22

@eugeneeugene8252 3 жыл бұрын

How come Milwaukee won,apart from one test Metabo was quicker or I don't get something

@SomeGuywithTools 3 жыл бұрын

Fair question, I should've explained better in the video but I called the Super Sawzall the winner for 2 main reasons: 1) The times on those first 3 tests were much closer than the gap in times on the 4th test, which also lead to the Super Sawzall having a much lower overall time. 2) With the Super Sawzall also having an Orbital mode it's cut times can be drastically decreased on the first 3 tests. (I have a video that will be posted on Friday comparing the Super Sawzall's standard cut vs. orbital cut which will help show the increased speed)

@Jitkoa1 3 жыл бұрын

I think you have to do the last test again. You pushed on the Milwaukee from the beginning, meanwhile at the Metabo only the last few seconds.

@SomeGuywithTools 3 жыл бұрын

I agree, I noticed it as I finished editing... I need to re-stock on metal blades and then go through again

@elvismartinez702 3 жыл бұрын

Awesome video, love seeing Metabo tools

@SomeGuywithTools 3 жыл бұрын

Glad you enjoyed! Hopefully there will be more Metabo to come!

@FixthisCD 2 жыл бұрын

I do like the Metabo but you failed to switch the Milwaukee in Orbital mode for the wood

@Pepuskhan Жыл бұрын

For you what is the best sawsall for demolish??

@smackmymonkey 3 жыл бұрын

Nice test, But you really need to choose the right blade for the application...

@SomeGuywithTools 3 жыл бұрын

The right blades were used.. Diablo Demo Demon 9" Wood - Nail Embedded 5/7 TPI with Carbide Teeth were used for the 2x10 and 4x6 and Diablo Steel Demon 9" Medium Metal (1/16" to 5/16" 10 TPI with Carbide Teeth were used for the galvanized pipe and cast iron If you think these aren't the right ones then what would you suggest?

@smackmymonkey 3 жыл бұрын

@@SomeGuywithTools Use a dedicated cast-iron blade for....cast-iron. Cast-iron is a very different animal compared to galvanised steel pipe. And use fresh blades for each test. I know it can be a high cost for some of the carbide blades tho.

@SomeGuywithTools 3 жыл бұрын

I didn't realize they made some specific for cast iron only... I've always used these since they listed cast on them lol... I'll check it out though, thanks. And ya, I would love to use fresh blades every time, but like you said that adds up quick

@bopang466 2 жыл бұрын

Is this video sponsored by metabo? Because anyone in need of a reciprocating saw who is not brain dead will for sure buy metabo after watching this video

@henu3detb 3 жыл бұрын

So sawzall lost 3/4 tests and won in overall?

@SomeGuywithTools 3 жыл бұрын

That being said, I kind of agree with you. In hindsight I should've looked at it more closely, rather than looking primarily at the overall total cut time

@henu3detb 3 жыл бұрын

@@SomeGuywithTools will metabo win in overall if you cut big piece of wood?

@SomeGuywithTools 3 жыл бұрын

@@henu3detb Compared to straight cuts with the super sawzall, yes. But if you use orbital mode on the super sawzall it is quicker in wood than the Metabo

@loucifer323 3 жыл бұрын

The metabo wins on weight alone I don't care about orbital too much vibration also on the cast iron you used a new blade with Milwaukee and a used blade with metabo don't do stuff like that people will stop watching your videos I know Milwaukee offers tools if you make their tools look better, you better be careful some other tool testers have had lawsuits against them

@harveysmith100 3 жыл бұрын

I'm sorry, this was the most bias, un-scientific test I have seen. The Metabo was clearly better overall.

@jacksmith2315 2 жыл бұрын

For real right!?! The metabo won 4 the milwaukee won 1. Milwaukee the winner? Could clearly see the blade was junk by the end n he used the shit part of the blade for the metabo way longer than the milwaukee where he used the good part of the blade longer. Whata dink to call milwaukee winner. Dumbass

@jacksmith2315 2 жыл бұрын

That was such a botched test at the end. Everyone that watches this can see metabo is the winner. You're not doing any justice for yourself or your channel callin milwaukee the winner because of that last botched test where you clearly favored milwaukee in technique in the only test it won but still call them the winner. Youd be better off deleting this video