Heavy Equipment Mechanic Beginner Harbor Freight Roll Cart Toolbox *Items Listed in Description*
Рет қаралды 60,069
Күн бұрын5 Drawer US General toolcart, some basic tools inside my cart. I am an intern so plenty of growing to do also more I have but can't fit into this cart. Have a 40" slide top on the way to move into here soon. Hope this gives some newwer guys some ideas on what the basics are that are used everyday or some organization ideas.
V This is everything inside V
Inside Top: sockets mostly Matco ADV, one set of Tekton, 1/4" chrome Matcos Silver Eagle, couple Snap-On. Tekton extensions 3/8" and 1/2" drive, Silver Eagle chrome. 1/4" Snap-On ratchets. Screwdrivers are Snap-On and a couple of Wera (really great screwdrivers), one mini Klein Tool micro multibit screwdriver, Craftsman stubby phillips and straight. Pry bars are Snap-On and a Mayhew. Lisle radiator hose tools. Couple Monster extendable magnets. Matco mag trays collapsable.
Top Left Drawer: Some HF hose pinch pliers, Matco channellocks and slip-joints, Klein strippers, Klein needle nose, Knipex dykes, Klein flush cuts, Milwaukee vice grips, Lang snap ring plier set.
Top Right Drawer: Matco meter, Cyclops work light, Streamlight worklight, Eastwood blow gun, Blue-Point filter wrenches, Matco small ez-outs, Matco 30" retractable test leads, Irwin crescent wrenches, charging cords in the canvas bag.
2nd To Top Left Drawer: Matco ball peen, Snap-On ball peen deadblow, Wilton 4lb sledge, HF pipe wrench, Tekton adapters, pocket knives, o-ring spoons, pens/pencils, mini screwdrivers, note pads, misc stuff.
1st Long Drawer: Snap-On metric and SAE wrenches, Snap-On ratcheting metric wrenches, Snap-On metric ratcheting stubby, Sunex stubby SAE, Snap-On crescent wrenches, Snap-On mini picks, Snap-On and Matco ratchets, Matco SAE allen keys.
Bottom Drawer: Milwaukee 3/4", 1/2", and 3/8" impact, Milwaukee impact driver, Milwaukee die grinder, MIlwaukee 3/8" ratchet, Milwaukee bit set, Snap-On 3/8" impact and ratchet, Snap-On air hammer, CP pneumatic die grinder, batterys, roloc discs.
Bottom Tray: Welding hood, face shield, multi port plug for chargers, Milwaukee Grease gun, welding gloves and jacket inside Milwaukee case, Blue-Point hex and torx set, gloves, long Snap-On 1/2" ratchet, Gearwrench indexing extendable pry bar, old old Matco angle wrench set SAE.
Side Tray: chargers, and misc caps/plugs, random nuts/bolts, and some rags. Kneeling pad on a mag hook on back of the cart.
@BigGreenGlizzy Жыл бұрын
This is how your tool cart should look before you even think about spending 2k on a box
@369ZIR Жыл бұрын
Honestly you’re right. 2k box and $500 worth of tools doesn’t add up. 😂
@ACmotors23 10 ай бұрын
Nah I got 50 percent off of a snap on to box and bought it since I saved a 1,000 dollars. Later on won’t have the same deal
@ACmotors23 10 ай бұрын
And why spend on a cheap box then later on have to buy a 2k one when you can get one off the bat and save 200
@BigGreenGlizzy 10 ай бұрын
@@ACmotors23 ROI... Tool box dosnt make you anymore money, Tools do./ Save you time
@BigGreenGlizzy 10 ай бұрын
@@ACmotors23 Me personally I would rather spend the money on car parts for the forever whip. Also my tool trucks guys are shiity salesmen
@zackschwenzer4892 Жыл бұрын
The more videos I see of it, the more I'm impressed with how well someone could do with just a cart like this. If I was just starting out, this would be about how I do it.
@ZeroHorsePower Жыл бұрын
Can definately fit a lot in one of these little carts, well worth the $270ish.
@DirtNastyy 2 ай бұрын
Damn son I didn’t even think I could fit that much in my cart. Pretty similar setup but I do plan on swapping all my icon chrome sockets to my sunex half and 3/8ths impact sockets like you do up top
@rzmod4766 10 ай бұрын
Best light in the biz! I have two
@hemm68 Жыл бұрын
That snap on 3/8ths extended reach brushless is no joke. Added an extra friction washer to mine and it slaps.
@izzywashington5461 Жыл бұрын
The Milwaukee rapid charger is a must
@Ilovecarsntrucks Жыл бұрын
I can tell you that he lives in the rust belt by the amount of impact socket 😅
@ZeroHorsePower Жыл бұрын
Ohio haha. No point having chrome too when I use an impact quite often.
@njt03 Жыл бұрын
I own zero chromes, what’s the point of them?
@eliezerramosjr1017 Жыл бұрын
@@njt03 I live and work in rust belts and as a Master Tech I use them quite often especially chrome being a thinner wall and helps fit in certain areas like these euros. Don’t use all the time but good to have.
@Moelester692 Жыл бұрын
Heavy equipment/crane mechanic in Los Angeles and I never even use my snap on chrome sockets , waste of money . Everything I work on has tons of space so it was never an issue using the thick ole black sockets
@madjackgamingandfitness498 Жыл бұрын
I’d say the only reason for chrome is when a fastener is in a deep area or tight space. I like my impact sockets and even the milwaukee kind are thinner, but even then they can’t fit where chrome can. I’ve caught myself making the mistake of taking my chrome sockets out when I thought I was done with them. It all depends on what you work on though you may not need them.
@doinjusfine1 Жыл бұрын
Very nice set up..
@joshuac4772 Жыл бұрын
Started out with the same box. That's about how full mine was before I bought a 2nd hand snap-on box from my Matco man. Somebody had traded it in on a $7,000 wall box, so I got it for a steal. Always ask your tool man about trade in tools and boxes. You can usually get some great deals
@charlesedwards8030 3 ай бұрын
My snap on guy is a retired guy that does it for fun now and gets us greats deals. I got my 68 epic snap on box $4,560 out the door brand new. I definitely got lucky.
@maxswagcaster5315 Жыл бұрын
Wow and I thought I had stuffed a lot of stuff in my us general box
@eliezerramosjr1017 Жыл бұрын
Very nice considering just a starter box.
@gangstalifers-4312 Жыл бұрын
Great setup man. Bad the exact same box. FILLED. To the top. Even has the top flip top filled with wrenches and sockets. I literally maxed it out till the point I was storing sockets and tools in a cabinet drawer. Upgraded to a used snap on box and oh boy does it feel great to have storage
@ZeroHorsePower Жыл бұрын
Just got a 40” slide top delivered I ordered a while back, excited to move over to that here this weekend.
@samuelw.3992 10 ай бұрын
That’s all. Guy really needs tbh. I got that same cart for my other shop, my main shop is a macsimizer box an 72” us general. Lately I’ve been enjoying the little us general roll Cart just fine.
@mrpistonrecaro6483 Жыл бұрын
That’s a nice cart has all needed and more.
@corranthomas9164 6 ай бұрын
i bought the exact same box off some schmuck who sold it to me for 45$, only 6 months old. starting out with a socket set, an oil filter wrench, and a 1/2 inch impact lol. literally just starting out as an express lube tech. 0 need to buy a massive toolbox if i'm just doing oil changes and tire rotations rn
@PANZERFAUST90 Жыл бұрын
Oh wow, I thought that was a US General chest at first. You know it's bad when Harbor Freight's brand is so popular that you confuse them with professional brands like Snap-On.
@ZeroHorsePower Жыл бұрын
Oh yeah👌🏼👌🏼
@davida871 7 ай бұрын
It says US General under the top lid. Snap on emblem added to a HF 5 cart. I have the same one.
@PANZERFAUST90 7 ай бұрын
@@davida871 Yes, I know that.
@SnorryHobo Жыл бұрын
They need to make that same box with shelves all the way down !
@njt03 Жыл бұрын
Almost every brand makes one
@ryanle1293 11 ай бұрын
I switched out the us general logo for a snap on logo once and showed my box to one of the older mechanics and he said it's a really nice box then I told him it was a harbour freight box
@FahimibnDawud Жыл бұрын
Nice lil setup!
@winstonsmith2766 Жыл бұрын
U need to upgrade to the us general full bank service cart. Love mine. I now just use my big box just for specialty tools and even then most are in my cart.
@ZeroHorsePower Жыл бұрын
I’ve got a 40” slide top cart now, much more room.
@Blue_Flame_Raptor Жыл бұрын
I saw that snap on badge then I looked at the rest of the box. Hmm I wonder where that came from
@BOILANEGG Жыл бұрын
Good set up used up every inch of the tool cart
@maxmotors9497 Жыл бұрын
You’re more organized than me😂
@shithappens1001 Жыл бұрын
seeing all those milwaukee and snap-on powertools in one drawer in a US General cart makes me extremely nervous, they sometimes have a tendency to "grow legs and walk off" if you catch my drift.
@ZeroHorsePower Жыл бұрын
I work in a pretty small shop, trust the guys. Plus they already have the same stuff I do haha.
@juliancastillo1687 Жыл бұрын
Great investment
@onthethrottle7104 Жыл бұрын
China box with a Snap On badge, hummmmm I don't know about that.
@pennsylvanianrailfan 5 ай бұрын
it's a harbor freight box, so yes chinese but who doesn't like a snap on sticker over their harbor freight sutff
@Yonny316 2 ай бұрын
China #1 🇨🇳 and dont forget it.
@dereksmith1803 Жыл бұрын
Good for you. You spent your money on the stuff that makes you the money (the tools) and not the box that holds them.
@ZeroHorsePower Жыл бұрын
I recently got a 40” slide top SnapOn cart but it was super cheap with my student discount.
@willferrell9263 Жыл бұрын
Cant wait to get my start in that field, got any tips?
@ZeroHorsePower Жыл бұрын
Find yourself a good shop, soak up any info you can, and being willing to work hard and learn. People respect effort, whether you know the field or not coworkers will respect you if you work hard. You’ll learn the field over time, but starting with the broom and mop bucket isn’t a bad thing. Prove your worth and work hard man. If you enjoy hands on mechanical stuff it’ll be a blast even the not so exciting jobs.
@337metalhead Жыл бұрын
I second that. Got started at a euro indie shop and busted my ass till I got hired at the local VW dealer. DO NOT be above sweeping and mopping as a apprentice. If you can lean, you can clean.
@JOHN-fx3xo Жыл бұрын
Is this like where’s Waldo? Are we helping him find more stickers?
@ZeroHorsePower Жыл бұрын
Always looking for more stickers
@donotrobme9295 Жыл бұрын
You could sell that as I’d fit more than u paid new fir all of it just fir how u packed it all in
@rellt5498 Жыл бұрын
Any storm grey snap on boxes in the shop? I’m curious how close the US General grey matches 🤔
@Moelester692 Жыл бұрын
I have a snap on box jn grey and a U.S. general cart in grey and the us general is a dick hair lighter in the most optimal lighting
@jc9233 Жыл бұрын
Nice socket sets bro. I have the yukon version of that car set up the same exact way lol. Only other thing I need are swivels lol. Hf if you're gonna make socket trays. Atleast make it so they fit side by side in in smaller boxes that you sell.
@jamesbynum3123 Жыл бұрын
Are those bigass swivel sockets in the middle area 1/2" drive?
@ZeroHorsePower Жыл бұрын
Yeah SAE & metric 1/2”
@dagger4146 8 ай бұрын
Not enough 10mm sockets.
@tylerg5365 22 күн бұрын
Must be in a shop with decent people. everyone from where I'm from they hire people if it's not locked in your cart there gonna use it and never put it back. that Milwaukee charger would be the first thing taken and they guy probably wouldn't even have Milwaukee tools smh. Nice setup though.
@griffisfamilyoutdoors9800 Жыл бұрын
What southeastern equipment do you work at?
@ZeroHorsePower Жыл бұрын
Location is in Northeast Ohio srea
@0newhester Жыл бұрын
this is a beginners tool cart?! i thought the small craftsmen tool box i had w some ryobi tools and husky sockets was beginner lol
@Kargoboy117 Жыл бұрын
I thinks it’s more to show how much you can store in a beginner’s toolbox. I work on a yard for the BNSF with 120 terminal trucks in our fleet. What he has in his tool cart could do 90% of the jobs on a regular basis. You don’t need a large toolbox to do your job. A harbor freight tool cart works just fine
@onesikm3 Жыл бұрын
@@Kargoboy117 aghhh I used to dispatch truck loads for bnsf, those were the days 😢
@ZeroHorsePower Жыл бұрын
I go to a tech school so I get student discounts off the trucks. Plus I like to go to pawn shops and buy stuff second hand. But also along the lines of what was said above, more shooting for what you can squeeze into a $270 cart.
@skunkycatog Жыл бұрын
90 % of those tools looked unused.
@ZeroHorsePower Жыл бұрын
I’m a part time intern, 90% is new since I started, and I wipe things off when I’m done.
@Halfsack-zac 11 ай бұрын
@@ZeroHorsePowerdon’t waist your time defending yourself dude. Looks like a good setup. I’d have loved to have a set up like that when I started.
@bobbyhempel1513 Жыл бұрын
Video description says harbor freight actual product says snap-on.
@ZeroHorsePower Жыл бұрын
🕵️♂️
@josepena1046 8 ай бұрын
No le rebajes a la casa jose por que los real state se lo quedaran de todos modos
@philadams8659 Жыл бұрын
I mean you could explain some things for the beginners out there.
@ZeroHorsePower Жыл бұрын
Everything is listed in the description
@nakamahaki650 Жыл бұрын
Why is the shop so quiet?
@ZeroHorsePower Жыл бұрын
Me and one other stay later than other guys, this is as we were closing up. Plus we’re extremely slow haha.
@LOUIS-fp3bv Жыл бұрын
On the bottom, that looks like bacon 🥓?
@ZeroHorsePower 10 ай бұрын
The maroon red pouch is a set of 4 way wrenches
@ryanrdiy 5 ай бұрын
Where are your socket organizers from?
@ZeroHorsePower 5 ай бұрын
Amazon
@nfa45 Жыл бұрын
Dope. Where can I pickup a US Snap on cart like that?
@ZeroHorsePower Жыл бұрын
Gotta custom order man, one of a kind.
@nfa45 Жыл бұрын
@zerohorsepower6522 dam. I was able to get my hands on a husky snap on, also a custom order lol
@fumanpoo4725 Жыл бұрын
Speak!
@ZeroHorsePower Жыл бұрын
😳
@carloscano4157 Жыл бұрын
The fake snap on😂
@ZeroHorsePower Жыл бұрын
Not fake, rare👌🏼
@beasyphone Жыл бұрын
Boy, where is your metal pinch off pliers? You trying to spill coolant all over my bay swapping Def LSU's??? Amateur lol. And trustworthy haha. If ypu sneezed at my Mack dealership ; your greasegun would already magically be set on 50 and also empty...like a sneeze- whoosh -empty-wtf?? MARCO!!!!
@ZeroHorsePower Жыл бұрын
Metal pair under the plastic ones, work fine the few times I’ve used them but metal vice grip style ones are a safer bet for sure.
@beasyphone Жыл бұрын
@ZeroHorsePower I have an old set of SK? I believe but just grabbed a couple Large Large from lisle for I think 30-40$ for the pair (egr lines) kind of tight to release/ hoping they loosen up.. but I've also been saying that about my Cr312??? Long neck SO cutters fir about 3 years now lol. Yeah "high leverage " as in you need a helper hanging on the other handle to open them!! Lmbo
@raymondromero4558 Жыл бұрын
That in no way looks like a beginner tool box
@ZeroHorsePower Жыл бұрын
oKAY
@straightdooshbags1786 4 ай бұрын
Junk
@ZeroHorsePower 4 ай бұрын
Yep
@Yonny316 2 ай бұрын
Do you work at pep boys?
Cool Items Official
Рет қаралды 33 МЛН
ХРОНИКА АПОКАЛИПСИСА
Рет қаралды 979 М.
Sửa chữa đầu đĩa oto, lắp đặt nội thất oto
Рет қаралды 3,5 МЛН