Support this channel -- www.paypal.me/SergeiDratchev
Пікірлер: 66
@whatheworld8 жыл бұрын
Laptops and printers, scanners , man, trucking has came a long way from payphones and sending a fax !! Nice clip !!
@asvmanic8 жыл бұрын
Hey Sergei, all excavators have the same travel pattern, pull travel sticks toward you and the excavator will move in the direction of the sprockets. Push them away from you and it will go the direction of the idlers. Usually the idler side on newer machines has a arrow on the inside of the track frame.
@mataiterapreha8 жыл бұрын
while my printers in a good mood. only a sergei quote
@TheDev08 жыл бұрын
The operator loaded it backwards to help with the weight distribution. On the rear of all tracked excavators you will find the hydraulic drive motors for the tracks - called the final drives. Those are the heavier side of the undercarriage. On the opposite end of the tracks are the idlers - basically big rollers that the track chains ride on. With most heavier machines it is good practice to place the final drives on the back, putting more weight on the trailer and less on the drives. I'm not sure on the regulations where you are, but here we are required to make an X with the chains from one side of the excavator to the opposite side of the trailer. We use heavy shackles in the holes on the frame you pointed to and chained to the opposite side of the trailer. It's been my experience that chaining from the track pads lets the chains come loose.
@dangarrison35035 жыл бұрын
D Pittman there is nothing wrong with chaining to the trscks.
@jonathanwhiteacleanwaterop82108 жыл бұрын
Nice load Sergei!! Love those newer E Series Volvo's!! Have a safe trip!!
@Dachamp20017 жыл бұрын
that's the keen yard I'd drop the trailer and head to the petro with a load that size you ant going to get very far or anywhere decent and that's where your supposed to tie down not the tracks. Hit your brakes hard them tracks are going to snap and you also can put a chain into them pockets on the supports between the tracks
@matteo46468 жыл бұрын
I'm from Pittsburgh PA and I a construction worker down there I drive the backhoe on the job alot
@TheBrokenWing88 жыл бұрын
Thanks for sharing Sergei, it looks like the loads have really picked up for you!
@ponycar24fan8 жыл бұрын
The weight of that excavator online is probably with a bucket the reason it weighs more.
@MrRinkly8 жыл бұрын
Was the guy in the truck stop trying to get run over,maybe a little hard of hearing. Your office thats what they call working from home. Nice video Sergei,happy trucking.
@godsok15 жыл бұрын
It’s got to be hard to find parking. I pull a step deck and it’s a pain in the a.. to get parking
@RBLucky8 жыл бұрын
Thanks Sergei nice ride and another great adventure
@CanStripey8 жыл бұрын
I'm sure it's been asked before but I'll ask in case it hasn't. Why not use mechanics wire for your flags? Easier than using zip ties and they are re-usable. Love your works/videos!
@jeremycyrus91325 жыл бұрын
What size boards do you use for your outrigger boards?
@fastst18 жыл бұрын
Heh, a Mac and a Mack, right on.
@romarizkov8 жыл бұрын
How did you plug in that thing with Honda and label "DRATCHEV" to lowboy trailer with the excavator?
@gregoryolson17826 жыл бұрын
Have you had any formal training with chaining down equipment
@TwoTyres8 жыл бұрын
I81 between i78 and I80 has construction and is down to one lane in each direction in some places. I would assume they do not want oversize loads in those narrow lanes. I see oversize loads in Harrisburg all the time during rush hour on I83. Where is the info on the curfew? On your permit or common knowledge.
@darkcustomxxx72527 жыл бұрын
youre a good operator, it'd be great to go on a trip with you, very interesting.
@Rbnqss8 жыл бұрын
That movement of your printer is nothing yet :D I was woring on computer aid and i had one faulty printer, whenever i put it on, printer mashed the print headd to side cover of the printer so fast that wwhole printer moved to right on the table.
@faithhighfield44148 жыл бұрын
D must be for _ umb_ss
@jessiemonterde63525 жыл бұрын
how many axle is this truck?
@peterincgy8 жыл бұрын
$500 ticket?Oh my!PQ cash grab!
@mokus86438 жыл бұрын
another slice of life ...good vid S G
@MrPally368 жыл бұрын
When you stopped at the first truck stop I see you hit a button as the person walked across the road, it had a sound of like air brakes. I first thought it was the brakes handle, but you were moving, so I am wondering if you have a switch that lifts the trailer a little to get over little things like speed bumps and such?
@HHTV608 жыл бұрын
it was my jake brake.s i flipped the switch to turn them on, and then released the throttle to activate the loud brakes. i hoped the guy crossing the road in front of me would hear the sound and turn his head ... the plan didn't work ;)
@adamjohnston81268 жыл бұрын
What Strongco are you going to?
@dodgetech028 жыл бұрын
I guess cab over guys would be safer in truck stops for getting front bumper and fenders ripped off
@harold175628 жыл бұрын
Only a $500.00 fine Sergei.. How about a $48,000.00 fine for not listening to the escort when he tells the driver he needs 2 escorts and 2 state cops to the ohio line and he gets rid of the front escort and tells police they will escort to ohio!!
@kamara_truckerkamara64498 жыл бұрын
What!!! Did you really get a $48,000,00 fine for not listening to escort? That is a lot of money to hand out for not listening and you must have been in Pennsylvania getting that fine. $48,000,00 could feed lots of homeless people or give the wife a brand new Honda Van. Good Luck next time
@mustafasobhi495 Жыл бұрын
Sergei brother how are you? I got 2 questions for you if you don’t mind 1- how many horsepower truck need to move the lowboy 2- and do you still work with Landstar ? If so , can you please post the log board for a lowboy Thanks buddy
@HHTV60 Жыл бұрын
1. don't bother with HP. You need torque. Minimum 1860 lb-ft for a 55 ton RGN or lighter; 2050 lb-ft for a 60 ton RGN or heavier 2. i sold my truck and trailer in september '22 and became a freight agent specializing in RGN freight (machinery and equipment). i don't have access to the internal Landstar loadboard. good luck-
@roundman6117 жыл бұрын
Why do you have to wash the machine
@jamessalazar87558 жыл бұрын
thanks sergei good one be safe
@transfetish8 жыл бұрын
Sergei, what is the speed limit for trucks in the US?
@HHTV608 жыл бұрын
Depends on the State: it can be as low as 55 MPH (California) or as high as 80 MPH (Utah & Texas). Typical speed limit is about 65 MPH in the Middle-West and North-East, and 70-75 MPH when you get further West or South.
@transfetish8 жыл бұрын
try Europe: Highway 90km/h max
@adoreehay94686 жыл бұрын
the letter D only sign😂😂😂😂😂😂
@kennyfuller97758 жыл бұрын
What do you use for a printer?
@HHTV608 жыл бұрын
hp something... same model many cops use in their cars. now you know why it usually take them so long to write up your ticket ;)
@kennyfuller97758 жыл бұрын
+Sergei Dratchev (Heavy Haul TV) thanks, don't forget to change out your rear sign for Quebec ;)
@Slvrsprt8 жыл бұрын
Shouldn't take too long in Quebec though. They don't like a lot of letters! "D"--Don't write me a ticket!
@Amarillobymorning7775 жыл бұрын
@@HHTV60 jajaja, make me laugh, have a safe/great day!!
@ecbravo9996 жыл бұрын
I enjoy your channel!
@WarriorTheyHate1015 жыл бұрын
Im from quebec, dot and cops in quebec are a real pain in the ...!
@jacobrice95968 жыл бұрын
he has a mack book air and a mack truck funny
@demetriusdavis957 жыл бұрын
Mac* book air
@kamara_truckerkamara64498 жыл бұрын
Hi Old Friend, How everything been going with you driving all over the countries of Canada and the USA? I have been offline for a couple months recovery health and hope to be on the road Trucking soon. I had the Computer on KZfaq and fell asleep upon waking heard you talking and good thing because you were sitting on your bed on your Appy Computer and printer printing your Permits, and signing them which reminded me that I am in great need of buying a new Computer and printer for my Truck. I want to know (if) your happy with your Appy Computer and Printer performance? If you are pleased with the both can you please share with me the Appy Computer and Printer Models with the cost from the Appy Store? By the way, how do you keep your Video Recorder working on your head (hat) while driving and walking around? Thank you again and I am happy your still out there driving your Mack Truck teaching people like myself on how to do a good job with heavy hauling. Good night and Happy Heavy Hauling to you. from Kamara the Trucker
@adoreehay94686 жыл бұрын
👍👍👍👍👍👍💫
@Bradfisher18 жыл бұрын
I use the same printer. LOL!
@imburg18 жыл бұрын
I really like that kind of work and wish I could afford that trailer. Will you take $200 for it?
@HHTV608 жыл бұрын
if you only have $200, heavy haul is not for you. you'd go broke during the first month.
@imburg18 жыл бұрын
LOL! Maybe I could come up with $400.
@anonymouscoward96438 жыл бұрын
in mother russia - machine picks you up...
@KennethRJones8 жыл бұрын
You're not allowed to drive at night?
@992drtahoe8 жыл бұрын
Each state has their own rules for oversized loads NC won't let you carry an oversized load after dark. but we've had an oversized load going to Virginia and they said we could only travel at night. so it varies from state to state
@vikingvic8 жыл бұрын
sergay, just get a big roll of string for tying the flags and stuff. dont litter zipties.