Heavy Rigid Driving Demo including Left Hand Reverse

  Рет қаралды 30,844

Watto Training

Watto Training

Жыл бұрын

Q-Safe Driving Test (class LR, MR and HR) - Left Hand Reversing Requirements
- Reverse the vehicle around a corner as if reversing into a loading bay. (NB: The manoeuvre can be conducted in a left or right-hand direction).
- The manoeuvre should be commenced from a position parallel to and within 2m of the left road edge or kerb. At the completion of the exercise, the vehicle should be parallel to and within 2m of the edge or kerb.
- The applicant should be given two attempts to successfully reverse the vehicle around a corner. In each attempt, two reverse movements and one forward movement is allowed. The forward movement for left and right reverse can be as far as the edge or kerb.
- This exercise should be done predominantly using the mirrors when observing to the rear. An occasional glance over the shoulder is allowed.

Пікірлер: 34
@caseyfournier823
@caseyfournier823 Жыл бұрын
The wave thing going on in this video reminds me of an acid trip lol
@SJ-ow7ui
@SJ-ow7ui Жыл бұрын
I am a 56 yr old woman and I have always wanted to drive a truck. I have done 2 hrs in a MR with another 2 hrs tomorrow arvo booked but this time with a flat bed so I can concentrate on the positioning of my back wheels. Then I have another 2 hrs on the road followed by the exam. I have also reversed park the MR which was 8 metres. I am doing ok considering it was my first time behind a big heavy vehicle. Wish me luck.
@XaviRonaldo0
@XaviRonaldo0 Жыл бұрын
Really wish they were required to test you in a bigger truck. MR licence can go up to some pretty bloody big vehicles including buses. 8m is tiny. It's only just big enough to have 'do not overtake turning vehicle' signs
@littlestories4015
@littlestories4015 Жыл бұрын
How did you go?
@prranjalsfortitude-bb1ns
@prranjalsfortitude-bb1ns 6 ай бұрын
Best of luck and tons of it 👍🏼
@DesiNZTrucker
@DesiNZTrucker Жыл бұрын
Boss, you make the shifting look so easier, thanks for great teaching, much respect 🙏
@1stellar_
@1stellar_ 5 ай бұрын
It is easy , grow up
@suebyles1434
@suebyles1434 9 ай бұрын
Great video; nice and calm. Thanks
@leightonbestmann1547
@leightonbestmann1547 Жыл бұрын
Excellent video thank you.
@kawalachristopher7917
@kawalachristopher7917 7 ай бұрын
Nice one and it's very calm
@daveyork0
@daveyork0 7 ай бұрын
We appreciate a verbal narrative without pacy background music. I know this makes me a narc and it is my depression showing
@kawalachristopher7917
@kawalachristopher7917 7 ай бұрын
You are so cam you are a great teacher nice one
@JohnLee-uk3gz
@JohnLee-uk3gz 10 ай бұрын
Cheers bro u the man beautiful instructions boss
@Tommytoolsqueezer
@Tommytoolsqueezer 3 ай бұрын
Thank god for syncro gear boxes.. no double clutching
@LEPPYTHEKING23
@LEPPYTHEKING23 10 ай бұрын
cool vid thanks mate just wondering if you cam was made out of jelly lol
@Shoreliners.1090
@Shoreliners.1090 2 ай бұрын
This is a brilliant video. His vocalising what should be every drivers inner dialogue when driving. My only question is do you pre select low range when changing down? Is it the same process as pre selecting high range? Just backwards . Thanks again.
@wattotraining757
@wattotraining757 2 ай бұрын
Yes Shaun, preselect the range shift just before making the selection. After preselection, the transmission automatically makes the synchroniser range shift as the shift lever passes through neutral.
@Shoreliners.1090
@Shoreliners.1090 2 ай бұрын
@@wattotraining757 thanks so much. I'm curious about everything I'm booked in for hr test in a couple of weeks. Have had a black car licence for years I'm 35 now just deciding to upgrade to broaden horizons. Also brushing up on online car and hr tests, wow have things have changed since 2006 when I passed my initial test.
@alizaheer2743
@alizaheer2743 Жыл бұрын
Very professional thanks for tips god bless you 🙏
@wattotraining757
@wattotraining757 Жыл бұрын
Thanks Ali
@neilarmitage6632
@neilarmitage6632 9 ай бұрын
We have synchromesh gearboxes nowadays and auto boxes
@timothyiorlano1996
@timothyiorlano1996 3 ай бұрын
Yeah and? A Lot of trucks are still non synchro.
@prranjalsfortitude-bb1ns
@prranjalsfortitude-bb1ns 6 ай бұрын
If I’m approaching a turn in 6high and I want to slow down and crawl ahead to my edge of the intersection, can I down shift from 6high to 4low directly without shifting to the 5th low or high?
@prranjalsfortitude-bb1ns
@prranjalsfortitude-bb1ns 6 ай бұрын
Also what will happen if for some unforeseen reason, I have to shift from 5high directly to 3rd, will the truck manage the shift from 5high to 3rd gear all on it’s own or will I have to manually switch the gearing from the previous high to the new low?
@wattotraining757
@wattotraining757 6 ай бұрын
It depends where you are (ie state/territory, country) but in Queenslnad, AUS you can skip gears but there are certain conditions as outlined in the Testing Procedures: Gears Performance outcome The applicant should demonstrate correct usage of all the gears appropriate for speed, vehicle and driving conditions. All heavy vehicle gear changes should be made within the optimum rev range for the vehicle. Note___________________________________________ In some cases, skip shifting is an acceptable practice. However, this practice is not generally required for cars shifting up through the gears. Consideration should be given to whether the speed is appropriate for the gear ratio and the nature of the driving conditions at the time.
@dannyb8169
@dannyb8169 Жыл бұрын
You are letting your steering wheel spin while you are driving/turning. I failed my driving test doing that.
@wattotraining757
@wattotraining757 Жыл бұрын
Hi Danny, the Q-Safe Manual (the ones the Examiners use to assess people of driving tests) states on page 49, "After the turn, it is permissible for the steering wheel to slip back through the hands providing the applicant maintains control of the steering". I hope that helps clarify for you.
@mojomojo2091
@mojomojo2091 4 ай бұрын
the pivot point is the most rear axle?
@wattotraining757
@wattotraining757 3 ай бұрын
I've always been told between the two rear axles on the prime mover....
@laurencebrill2020
@laurencebrill2020 Жыл бұрын
Hey Watto❗️ Man, something is very wrong with your camera 😳 It’s got some weird wobble thing going on and literally started making me sea sick from the start 🤢 You may need to redo this but fix the camera first. Sorry mate, couldn’t finish it 😕 🚛💨
@brendanscottwatson
@brendanscottwatson Жыл бұрын
Thanks for the feedback, will redo when I get a chance!
@angelitoquinto
@angelitoquinto Жыл бұрын
Hey mate, what driving school is this?and where your location?
@tetrodotoxin3863
@tetrodotoxin3863 28 күн бұрын
The wobbles making me dizzy.
@wattotraining757
@wattotraining757 28 күн бұрын
sorry about that! Will try to make some more asap without the wobbles!
HR TRAINING - Basic
9:23
Strategix
Рет қаралды 846 М.
Road Ranger Demo Drive
10:56
Watto Training
Рет қаралды 17 М.
КАРМАНЧИК 2 СЕЗОН 7 СЕРИЯ ФИНАЛ
21:37
Inter Production
Рет қаралды 445 М.
C+E | Class 1 Reversing exercise for the DVSA driving test - DRONE VIEW!
13:21
National Driving Centre
Рет қаралды 757 М.
Heavy Rigid Reverse Assessment Demonstration
4:55
Armstrongs
Рет қаралды 100 М.
Meet NTI Experts - Truck License Classes
2:19
NTI
Рет қаралды 21 М.
The biggest fails from Driving Test | Driving Test 2020
10:40
Channel 9
Рет қаралды 4,9 МЛН
How To Drive A Truck - How To Use The Auxiliary Braking System | VOLVO TRUCK
7:31
Ian Watson's Truck & Motorcycle Training Videos
Рет қаралды 195 М.
Medium Rigid Pre-Drive Checks
7:38
Watto Training
Рет қаралды 10 М.
Mainstream Group   Lorry Reversing Rigid   14 09 17
4:41
Mainstream Group Channel
Рет қаралды 127 М.
How to use your Mirrors when Reversing - car parks and on the road
13:39
Conquer Driving
Рет қаралды 2,3 МЛН
Losing my Driving Licence - Victoria Australia
4:16
Dorje Rabbit
Рет қаралды 184 М.
Walt Collins - TLILIC2016 - LICENCE TO DRIVE A HEAVY RIGID VEHICLE
12:07
Foresite Training
Рет қаралды 16 М.
КАРМАНЧИК 2 СЕЗОН 7 СЕРИЯ ФИНАЛ
21:37
Inter Production
Рет қаралды 445 М.