Installation step by step of QUAIFE LSD on 02M 02Q gearbox. On this video I show all the steps to install the lsd on the gearbox. VW SEAT SKODA TDI HELDERPUTO SKILLATURBOS.
Пікірлер: 59
@--JinX--2 жыл бұрын
Pro tip to make your life easier next time. Once you take the heads off the rivets. use a punch to drive out the remaining parts of the rivets, then use heat on the ring gear. Will press off much more easier.
@--JinX--2 жыл бұрын
Third pro tip i'll give you, When replacing the outer shells of the bearing from the casing, use a heat gun to heat the casing, outer shells will fall out with very little effort.
@jumpspace74142 жыл бұрын
You should sell merchandise. I would put your channel on my car. This channel is very educational, one of the best channels on KZfaq.
@HelderPutoPerformance2 жыл бұрын
Thanks 🙏
@jumpspace74142 жыл бұрын
@@HelderPutoPerformance have a great weekend. I will spend my weekend watching all of your videos learning how to build PD. Maybe i will buy Volkswagen in 6 months. Your videos are very helpful. I would be interested in buying stickers or merchandise from you. Thanks.
@rsc88413 жыл бұрын
Need one of these for my car! Thanks for this video it'll help.
@Ruben99983 жыл бұрын
Best build ever 💪 I'm enjoying this
@thebigfatdevil3 жыл бұрын
Literally needed this video so bad😂 thank you 🙏🏼
@DevineDigital3 жыл бұрын
I always wondered why so many people pulled them apart the other way, leaving the gears in makes it so much easier.
@--JinX--2 жыл бұрын
Fourth pro tip for you is, the shims behind the bearing outer shells are there to set preload on the diff bearings. When ever new bearings are replaced, the pre load needs to be redone as no bearing is the same. VW/Audi Specify that you need to have 0.30mm of preload on the bearings. You need to measure this using a dial gauge. This is not the correct way to be doing this job. It will be functional but not correct.
@HelderPutoPerformance2 жыл бұрын
Hi mate for me longest the diff don’t have play is fine but thanks to let me know
@bleronsylejmani7284 Жыл бұрын
This is correct. There is a different video showing this. Basically you measure the “play” distance with a dial gauge, then add 0.3mm to it, then add new shims according to that. Correct?
@TheJoblessFool3 жыл бұрын
I had same issue few weeks back, dark side very quickly sorted issue, the bearings you've received are o2j rather than o2m
@cultusgti3 жыл бұрын
These Portuguese dudes eh, masters of diesel!
@bleronsylejmani7284 Жыл бұрын
Can you also make a video or have a video about how to install the 02M / 02Q transmission reinforcement brace? Its the brace that ties two ends of the transmission together.
@--JinX--2 жыл бұрын
Second pro tip to make your life easier. heat the ring gear up and use lighter gas on the diff, ring gear drops straight on.
@HelderPutoPerformance2 жыл бұрын
Thanks
@VWPassat_3BG3 жыл бұрын
Thanks for the video bro 👍
@ronanjuries70912 жыл бұрын
Great video 👍
@don.timeless4993Ай бұрын
i don't understand why OEMs still using open-diffs or clutch-LSDs with all complicated traction system instead of the Wavetrac LSD or at least Quaife LSD that can do auto lock & auto torque balance precisely for both streets & off roading with less part & low maintenance cost?!
@Paulie_franga8 ай бұрын
Nice work mate. Hey I'm struggling re installing the shift tower back into the case. Do you have any good tips to help. I'm struggling
@akoskormoczi9373 жыл бұрын
Hi. Thanks for the video. What kind of gear oil do you use for this?
@cangelique46223 жыл бұрын
very nice my friend 👍
@arthuresperanca95943 жыл бұрын
Está bom !!! Isso quer é carvão a fundo
@europemotorsmotorsport89603 жыл бұрын
Top top.. Nice 👌💪
@victoryismyne4794 Жыл бұрын
Does this LSD “Upgrade” make the Transmission a true AWD (on all the time) instead of just part-time AWD (when the computer senses traction slipping)??
@Reekysmoke2 жыл бұрын
Great video mate straight forward and easy to follow👌🏻 would a 6 tonne press be enough to do the lsd or would need a press like 10 tonne
@HelderPutoPerformance2 жыл бұрын
6 tonne will be fine mate thanks for watching 👏
@arthuresperanca95943 жыл бұрын
Lpeças de luis Rosado. Ele tem boas ferramentas e baratas . Diz que vais da minha parte. Artur Esperança
@Rinxtzu3 жыл бұрын
What oil Brand and Spec did you put after in?
@midnightcarpoor2 жыл бұрын
whats the size of new bearing?
@ruialmeida52173 жыл бұрын
podia ter dado calor na coroa para ser mais fácil entrar no lsd
@heldermonteiro15383 жыл бұрын
Mais um grande video,nao ha maneira de fazer um antoblocante artesanal?
@HelderPutoPerformance3 жыл бұрын
Boas amigo já fiz un tens k ver aí nós meus vídeos
@salvaprats60723 жыл бұрын
Yessss !! Is this same box on vw transporter t5 1.9 ??
@HelderPutoPerformance3 жыл бұрын
I don’t know 🤷♀️
@16toni1252 жыл бұрын
Hélder preciso de ajuda. O meu a3 8l de 99 e tem uma caixa EBF. Deram me uma caixa de um a3 8l de 98, mas a caixa é uma DEA ... São iguais mas o seletor é diferente. E agora o que fasso para conseguir adptar os meu cabos no seletor da caixa? Ja agora alguém me sabe dizer se o racio das caixas e diferente ?
@HelderPutoPerformance2 жыл бұрын
O racio vai ser diferente de serteza . Tens que ver se consegues trocar o seletor para a outra caixa se não der não vale a pena inventar
@doubleclutching44113 ай бұрын
Can I put an fjw gearbox on my a3 8l asz? I would like to have longer ratios. Can i swap the complete trasmission of an ibiza into mine?
@HelderPutoPerformance2 ай бұрын
Yes you can but you need to change the bell housing on the gearbox
@doubleclutching44112 ай бұрын
@@HelderPutoPerformance thanks, so only Bell housing, the dogbone mount?
@HelderPutoPerformance2 ай бұрын
@@doubleclutching4411 original dog mount
@bleronsylejmani7284 Жыл бұрын
Hi there, if we are using a 4wd 02M in 2wd mode (without the transfer case) do we need to order 2wd quaife or 4wd quaife?
@HelderPutoPerformance Жыл бұрын
2nd
@bleronsylejmani7284 Жыл бұрын
But remember, we use blanking plate from Epytec and custom 02M driveshafts from Epytec. From what I notice, we need the 4wd LSD order not 2wd. It would be the same as using stock diff (toothed) with a blanking plate. Hope I’m right because I already ordered the 4wd LSD version (toothed shaft)
@SR-xk3oy Жыл бұрын
How do you re-shim if you have too much play?
@HelderPutoPerformance Жыл бұрын
You cam buy the shim separate
@khaled7965 Жыл бұрын
Good video.. which oil are you using? 75w140?
@HelderPutoPerformance Жыл бұрын
75w90
@khaled7965 Жыл бұрын
@@HelderPutoPerformance I already installed but I put 75W140 is there any problem?, My country is super hot at the summer.
@HelderPutoPerformance Жыл бұрын
@@khaled7965 it’s ok not going to damage
@khaled7965 Жыл бұрын
@@HelderPutoPerformance great.. thanks mate 👍
@martinhofranca87773 жыл бұрын
Which gear box is that is that a dsg ?
@HelderPutoPerformance3 жыл бұрын
No
@stephenmaximo40174 ай бұрын
Is eliminating endplay important? Or no?
@HelderPutoPerformance2 ай бұрын
Yes
@jakesanger11453 жыл бұрын
I have same gearbox do you know how i can check if it has lsd without splitting the gearbox? Thanks