next episode just dropped: kzfaq.info/get/bejne/nppdmtiiytiZgGQ.html

Hang the desk from its legs from the ceiling. Then put the set up on top of it (between the four legs of the desk). Basically an upsidedown desk.

Remove the legs of the desk

Attach the automatic thermal paste dispenser above the fan so that as soon as the fans spin, the thermal paste dispenser spews thermal paste everywhere so that the PC can stay nice and cool

Drill holes into the desk in strategically inconvenient places to make it look like swiss cheese

Add gpu risers or extenders and have the gpu just lying on the floor outside of the case

I have a lot of ideas! Pick the ones you like: - make the entire desk a PC - Opaque glass on monitor for privacy - add RTX 4090 - Put the tiniest monitor ever - Install ubuntu - Cover it in double sided black tape and glitters to make it look like galaxy themed - add a separate cooling fan to cool you off in the summer - add a toaster that runs on the CPU's heat - make a border aroung the screen with yeesterpaste - coin powered

The desk requires adequate cooling. Therefore, write down a dozen different drill bit sizes on a piece of flash paper and place them in a small green fishbowl. Then write down numbers 1 through 10 on a piece of individual pieces of flash paper twice and place inside of a small blue fish bowl (20 total). These numbers will be the X,Y coordinates necessary for the hole placement. Choose only 5 of the drill bit sizes at random from the green fish bowl and then choose two pieces of paper at random from the blue fish bowl for the corresponding X,Y coordinate of each hole placement of which you evenly mapped out 10 evenly spaced lines on the X,Y plane of the table. For example: 1/8 bit on 5 (X), 5 (Y) would be the center of table. Once the hole lottery system is complete, throw a match into each fish bowl. Enjoy!

A thing I wanted to do a long time but didn't had the resources is to make a transparent mouse pad with this black magnetic fluid in it and then attach a magnet to the mouse so you have a cool effect when moving the mouse.

You should use old computer cases to lift the desk up because you have a couch instead of a chair!

In order for you to turn on the computer, you have to press 8 buttons at once

I liked the idea of cutting holes into the desk like swiss chees, but I'd rather the holes be plugged with either different types of woo or resin and instead of holes, just cut whatever shapes, squiggly, triangle, square, whatever. You could also give lips to the shapes so they just sit in there like that of a child's block game, so you could add and remove them.

Build a custom water cooling loop for the monitor that has tubes looping all around the desk. Yes the monitor not the pc

Make the monitor an 85 inch tv screen.

There needs to be a shelf on top of the setup, where all the thermal paste substitutes sit on top of.

Make the CRT play back what you just did on the regular monitor, but have it lag behind a few seconds.

Add a giant power button that you have to slam to power on, make sure it’s nice, clicky (preferably with a mechanical switch) and make it orange/black themed like gigabyte made it

You should add a second monitor in place of the side panel

I think we all know what this setup needs. A toaster. It needs a toaster.

Build the PC Components into the desk and place a transparent surface over top of them.

make it so that the computer needs coffee to operate!

Cut off all the desk legs and replace them with wooden statues of whatever you'd like. I'm personally thinking a fish statue, a lucky cat statue, a turtle statue and just a regular old log (you can turn that into whatever you want later). I'm picturing the log in the back left, the lucky cat in the front right, the turtle sticking up vertically, (so you'd attach the face of the turtle to the desk leg area) at the front left and the Fish, (also vertical) at the back right.

Maybe you could take all of the PC components out and stuff them into a monitor then put an lcd display on the case and swap their places so it's like a backwards setup

Let’s see… So you definitely need at least ONE of the following: -An RGB Integrated cupholder -A pull-out extension on the desk where you can put your food whilst watching something -A CPU display gallery as the backdrop -A pop-up power station -Seamless Ports that connect to your PC -A toilet paper holder -A pop-down headset stand (that retracts from the “second” story) -Drawers (obviously) -Watercooling (obviously) -A Water/Coffee dispenser -Ambient lighting (RGB but not obnoxious) -A key holder for when you need to rush down to Microcenter to get something -A built-in toolbox -a hammer compartment for when you need to rage and destroy everything -a cool adjustable webcam you made it to the end

Use Pcie risers and stick the gpu to ceiling

Integrate a pc somewhere convenient and cool, like inside the case if you can. The console could be anything and doesn't necessarily have to work optimally

Attach the gpu to the other side of the desk with pcie risers, and maybe do something similar with the case fans.

I'd love to see like, just Legos all over the set up, like glue them the case and seat and.. everything, I'd find it kind of funny, plus could add a lot more customization options.

See how many drop will it take for a ram stick to fail. And secure the monitor side ways onto the side of the desk or even easier do it on the side of the pc case

Do a double decker desk but put the pc sideways on top of it

waterproof everything inside the pc case, then block all holes in the PC case and turn the PC into an aquarium. take fans out so the fish don't get chopped up and the water will serve as the cooling

Add a realy big enter key to your setup. This is really cool 😎

Get a desk to put a chair on, then get a taller desk to put the setup on so you can feel big!

Put the Gpu on an extra long riser cable, but rap the gpu like a blanket.

Add springs to the underside of the desk top so that it’s constantly shaking

- Use a 2 core processor, 1gb single channel stick of DDR3 RAM on risers, ~160GB 5400RPM HDD, but then install like a 3000s/4000s gpu and Ubuntu Server. - Cut the legs in half, but don’t make them level. - Use you own power button but put it in the most inconvenient location. - Mount the thermal paste dispenser over where your mouse is so that when your hand is getting hot moving the mouse around the thermal paste will help keep your hand cool🙂.

Add a crt with a retropie setup in it to emulate

1. Fit your monitor into the pc cabinet (or) 2. Use Aquarium as a Pc cabinet 😂 & Fit the slim monitor on any side of it.😅 3. Hang your keyboard instead of placing it on the table.😁 4. Use a skateboard as a mouse pad. 😂 5. Use swinging table 🤣

Add a huge fan under the desk and add holds into the desk for air flow to have the chilliest pc

Sand down the top of the table and put thermal paste as it’s finisher for sealing the wood.

MAKE IT 3 STORIES TALL (FIRST)🎉🎉

build another smaller pc inside the current one and make the side panel the monitor for it.

build a fort made of desks or anything else around the desk, and cover the fort in rgb lighting for max fps

mount the components directly on the desk, and cover them with a metal plate and some glass or transparent material, then use the strange plane power button instead of the normal one, it's so much better and industrial looking, the end result should look like a cnc machine

Have a command that has a random timer on it which makes the pc randomly crash. make it pretty often too so its as horrible as can be

Put window xp in it, it will be so cool

Put the components (PC, Keyboard etc) inside the desk with a front-facing projector that beams the monitors on a wall. Now make it foldable and round. Bam -- PC Wheel setup.

use an old crt tv as the display, use an old radio as the speakers, use a vintage rocking chair as the chair, and use a vintage looking desk, the vintage setup!

Flip the desk and put the pc amd monitor on the lags

Put the pc on top of the monitor.

Hey Adam, unlike most people who have joking ideas, I feel like this is the perfect opportunity to do the best modifications possible, whilst still being technically "ridiculous" as you had requested the rest of the audience. I'm planning a design right now, I'll put it up when it's done

Cover the chair in RGB everywhere possible and make it the ultimate gaming lawn chair

Use fused ram sticks as legs for the table.

Hang the PC on it's side above the keyboard with rope, or displayport cables

Have a water cooling table with rgb lights. Have all your past CPUs on the back of your monitor to transfer all the heat away from the monitor.

Do the double desk thing, but hear me out; what if you connected a wired RAM extender (that has a lot of RAM ports), put it on the above desk, and show off your ridiculous amount of RAM.

Swap around the PC and chair

add shreck hanging from the roof holding onto your pc

Put some giant radiators below the lower desk and put there 2 to 3 3fan radiators so that the fans make no noise while keeping your PC as low as possible on the temps. Also, CPU and GPU Water-Cooling, so that the only thing your hear is the clicking of the relays on Motherboard and GPU and also a supreme PSU without fans or one that can be water cooled to keep the build as quiet as possible. Basically like the Ciller PC from LinusTechTips.

I've got a good idea! You should swap the PC and monitor so that you will be looking at the side pannel of the PC, and the monitor is facing your left, where the PC used to reside.

Add a battery pack somewhere in the setup to power the PC if the power goes out!

vinyl wrap the whole setup or as much as possible so it looks nice

Use a air condicioning unit to cool down the pc and add a back pannel behind the table to hide all the mess of cables

Water cooling the PC, but use thermal paste mixed with water.

Replace the monitor with one small enough to fit inside of the case

Well after examining a handful of tries from ambitious innovators to power computer with creative energy sources, I believe *the most reliable and efficient source to emit electricity is our own body* There are plenty of innovative projects that use the human body as a power source from harvesting energy from body heat, to generating power from human sweat. But I particularly want to focus to the idea of *converting human kinetic movement into energy* and also "discourage" newer generation from sedentary lifestyle. Specifically, building a *Pedal-powered generator desk* that could generate enough electricity to power an entire pc setup, would fit into the concept of the video. Moreover, some other ideas/modifications that you could attempt are: *-Building a pc case exclusively from fans* *-Replacing a boring and ordinary monitor setup with smart glasses* *-Gaming on cursed keyboard (a programmable piano keyboard) and mouse (a Finger HandHeld Trackball Mouse, Ring Mouse, Pen Mouse or a Stylus)*

Use a crt monitor as second monitor or make your desk see trough

1st, put a pc with a monitor on your big desk. Add and extra monitor that is upside down. Add some cooling for your monitor and get a BIG keyboard and mouse, not forgetting yout second desk, which will have a cat bed on top, with a random cpu. Make sure to add a few cactuses on the second desk, and have a pc with no case too.

Remove the legs of the desk and put wheels directly on the bottom of the desk. to make it more mobile" and easily movable around the office.

Colour everything 💙

I realy want to see that nature themed done to it

If you end up making this setup a double decker You should definitely get a bar chair that can lift you up to the second setup

Make one of the legs of the desk a Reservoir to water cool the pc

Get a car battery, trickle charger and 4 12v actuators and an up/down toggle switch. It's like a super over the top robust height adjustable desk. That's what I built. To mount the actuators, I bought a shop work bench with an already manual adjustment height holes. But instead of setting the fixed height, I mounted those. The slotted legs make sure it won't tip over and stays straight up inside the bench legs.

Have the monitor attach the upper desk so it’s hanging down but still normal for use.

get bunch of the wide screen monitors and flip them vertically to make a giant 55" segmented monitor display. (ultra wide for extra points).

Make like a node clip design. Make the one table go though the other table but a like a 45 degree angle. Then put the pc under the table on the the table that’s on the 45 degree angle. And ig leave the monitor the way it would normally be.

Get the ultimate vr setup with face tracking full body, and like a tred mill, and get a valve index, or just replace the monitor with a vr headset with reDICULUS SPECS or maybe do that one thing to where you need glasses to see the monitor.

turn the desk on it's side add and add another one so the computer can be in the gap

Add a desk on both sides facing long ways out where its a U shape and add 1 or two fans for personal cooling, ( squirrel cage blower fans would be the most ridiculous)

Put heaps of silly string on the desk and change the keyboard to one from like the 2000s

Add a bowl of thermal paste. You could also replace the thermal paste inside the pc with orange juice

You shoud have the biggest keyboard and mouse combo

Make a hole in the middle of the desk and put a massive fan to keep you and the pc nice and cool

Make it a double decker/bed setup. Add a pc at sitting height(or maybe even sitting on the floor height, and then add a pc at standing height. Enjoy.

You have to get one of those couch bass shakers

sticker bomb the whole desk!!

Add a big spotlight as a desk lamp

VESA mount a second monitor on top of the first one, both in portrait style

You should split the key board in half and mount it on the arm rest of an gaming chair and replace the mouse with a trackball gaming mouse and also mount it on the arm rest

Add 4 computers on top of this pc and make a custom loop that cools 5 PCs at once.

Love the content! What about a “wall of Ram Sticks” ❤❤😅

Graffiti the monitor and put googly eyes on EVERYTHING, also the PC components (for the graphics card, you could put them on the fan blades) 😁

make it a standing dask, but make it like an elevator to access different multiple pcs/monitors on different a height.

In a gamming cabinet put monitor on the glass Panel and use it no need to use external monitor as it become one unit

Wall of desk around around where you would use the setup from except on one side so you can still use it

Put your portable monitor as a second monitor, but put it as the glass from the case.

Add RGB lights EVERYWHERE! Like under the deck, the back of the monitor, and a RGB mouse pad made of LED light strips.😂😂😂

Use 4 old TVs arranged in a 2x2 pattern as a big monitor

Add a desk over your main desk and then attach your main desk's monitor upside down to the 2nd desk