2 Easy Steps To Get A LOUDER MASTER
Рет қаралды 25,651
Күн бұрынA video on 2 easy steps to get a louder master, in any DAW i.e Pro tools, Logic, FL studio, Ableton, Cubase, Studio One etc. from your bedroom.
0:00 Intro
0:55 Explanation Of Double Limiter Trick
2:28 The Vintage Limiter
5:05 Vintage Limiter A/B
6:46 The Maximizer
7:32 The Difference It Makes
9:25 The Conclusion
➡️ Visit Our Site For Goodies!: www.helpmedevvon.com
➡️ My Music Channel:@DevvonTerrell
➡️GET OUR EQ PLUGIN: cutt.ly/329lKtP
_________________________________________________________
▶ TEMPLATES (STOCK VERSIONS AVAILABLE)
➡️Pro Tools Template Download: cutt.ly/4fluyUY
➡️Logic Templates Download: cutt.ly/qfluoEp
➡️FL Studio Template Download: cutt.ly/4fluaAx
➡️Ableton Template Download: cutt.ly/tflufpi
➡️Studio One Template Download: cutt.ly/4fluaAx
➡️ Cubase Template Download: cutt.ly/qxtObRU
PRO TOOLS, ABLETON, LOGIC, FL STUDIO, CUBASE, AND STUDIO ONE TEMPLATE AVAILABLE
_________________________________________________________
▶PRESETS
➡️Help Me Devvon Studiorack Presets Download: cutt.ly/Ng8wxPu
__________________________________________________________
▶ IMPORTANT TUTORIALS
➡️Getting Louder Masters: cutt.ly/l2M8Uvf
➡️Parallel Compression: cutt.ly/2sYt1hh
➡️Secret Mix Buss Technique: cutt.ly/Z29zKK4
➡️My Favorite EQ Plugin: cutt.ly/Y2M25uV
➡️Drake Type Vocals: • Mixing Vocals Like Dra...
➡️Equipment I Use: cutt.ly/Tyk5Ch0
_________________________________________________________
▶ PLUGINS I USE:
➡️Waves Studio Rack: cutt.ly/Qf8pmWl
➡️Waves Reel ADT cutt.ly/4yk527X
➡️CLA 1176 cutt.ly/ryk573b
➡️F6 cutt.ly/Kyk6rTA
➡️R Vox cutt.ly/3yk54Us
➡️Waves Doubler cutt.ly/oyk6wtb
➡️Waves NLS Channel cutt.ly/iyk6w0N
➡️Smack Attack: cutt.ly/SyvVrEQ
_________________________________________________________
▶ JOIN OUR COMMUNITY HERE:
➡️Our Discord: / discord
➡️Instagram: / helpmedevvon
➡️Twitter: / helpmedevvon
Email Me: helpmedevvon@gmail.com
#mixing #mastering #tutorial
@fernan4x Жыл бұрын
You taught a whole generation how to mix, you a goat 🐐 without even knowing it 🙏🏿
@HelpMeDevvon Жыл бұрын
I appreciate the kind words
@stealthstar4 Жыл бұрын
He did. But I still can't figure out why *KZfaq* doesn't have him at the sheer top when searching *Pro Tools* in general? Devvon is the *got damn* husband to this DAW and *Pro Tools* needs to start acknowledging him as well. This is something I have never understand? He talks to his audience in a pure and clear language so everyone can understand. not like those other people who want to sound all fancy with their hieroglyphic's terms. That's why I stay my ass here and don't search anyone else. 😄💙🧡🤎🖤🤍
@chauncey891 Жыл бұрын
Deadass!
@kylevalentine9645 Жыл бұрын
Facts🔥
@mattblaque100 Жыл бұрын
2nd dat
@Thetradingnurd Жыл бұрын
I've been learning from Devvon through out my career as a music producer and not once has he ever disappointed
@mirxclentuli9197 Жыл бұрын
Devvon has been teaching me for the past three years, and I am still in awe of how he continually comes up with new and better techniques to help us advance. By this point, I might as well consider him to be my mentor. 😂
@fmajor_music Жыл бұрын
Have been doing this for a long time and it really makes a big difference with loudness and colouration
@sheddyshadrack Жыл бұрын
Devon, you are the real deal... May God bless you... I could say that my production has really become solid because of your videos...
@JonnyKemp Жыл бұрын
Love all you do Devvon. Was rockin’ with ya since I was a youngin’ in 2016
@DJMontini94music Жыл бұрын
One of the best tutorials of Ozone 10 IMO
@khay_mix7037 Жыл бұрын
Thank you devvon, you're the best
@vardon718 Жыл бұрын
Thanks man another gem
@kentronclayton8331 Жыл бұрын
Definitely noticed the difference thanks for that great content
@sjtheartisan Жыл бұрын
Aight I tried it. All I gotta say is…wow, the difference in punchiness, everything is glued the right way. Definitely definitely gonna perfect this method for myself moving forward. Thank you for this 💎
@HelpMeDevvon Жыл бұрын
Yes i love to hear this!!!!
@sjtheartisan Жыл бұрын
@@HelpMeDevvon fasho, again thanks for this video. One small addition can make a huge difference
@thokozanimnyandusoulem9677 Жыл бұрын
Thank You..Nice One!
@therealarrogant1725 Жыл бұрын
Helpfully tip.. Been starting to master at this stage in my career
@francisguyman3819 Жыл бұрын
holy fuck that difference was insane. this is a life-changer dude
@TzoHill Жыл бұрын
Yeah man! I just got Ozone 10 too, love it. Only plugin I use to Master - it's all you need as mastering should only be a little touch up anyway. great tutorial brah
@lowke14 4 ай бұрын
idk what all the fuss about , but this trick has honestly helped me especially when it comes to your masters translating to other speakers
@camillamedia2436 Жыл бұрын
This was definitely a smart idea 💡
@ryde2012 Жыл бұрын
Fantastic
@busyworksbeats Жыл бұрын
Let’s go!!🚀
@HelpMeDevvon Жыл бұрын
THE LEGEND!!!
@dja.selekta Жыл бұрын
Hey Devvon, I just watched this and the softclipper tutorial. I you can get the same effect by putting a compressor with fast attack and release, a light ratio 1.2-3:1 and drop the threshold into the RMS of the material, if the compressor has an adjustable knee, throw on the soft side. Make up whatever is reduced 2-3dB is usually enough 😊
@ebenezermnisi5168 Жыл бұрын
Dope song. 🔥🔥
@richboyizzycash 11 ай бұрын
Game changer
@MR_Cellarpop Жыл бұрын
Thanks
@franknellyproducer Жыл бұрын
OK mate, thanks
@trubblekleff3655 Жыл бұрын
waddup broly..i subscribed to you 2 days ago and im impressed..im building a studio and so far, i have MANY plugins to tweak my music, but i feel its missing something..and since i have been paying attention to you, i have learned a couple of the tricks..i am learning waves since i have ALL of their plugins..im grabbing that god particle and ozone 10 in a few days..i make my own tracks as well..fwm broly on some collabs..in other words, HELP ME DEVON..im drowning..
@TheTonyboy33 2 ай бұрын
This is the best video found on how you get better loudness.. I am guilty of just using one limiter
@anthonyroberts9232 Жыл бұрын
😀I will definitely try mastering differently to the norm and take a unique listen to the results be comparing a mastered song to a re-mastered song.
@megawaatthedj Жыл бұрын
This I shall take on + TY HMD
@deejayworlhed738 Жыл бұрын
Am not a producer but you have teach me alot in this
@PNoirmusic Жыл бұрын
I have a similar masterchain. I use the Sonnox Oxford Limiter as my first limiter and the Ozone Maximizer as my brickwall.
@dafingaz Жыл бұрын
I have Oxford Inflator after Ozone. Game changer!
@JackDenning 10 ай бұрын
That song is so fire damn
@f8dedmadeitt Жыл бұрын
preciate this
@aaronpanganiban4827 Жыл бұрын
Do you happen to have a series on how to master for beginners? Like what values of LUFS or RMS to aim for and etc?
@H.P.production Жыл бұрын
thnkyo man
@SuperFaceless1 Жыл бұрын
I think your the man that spoke on this before anybody else that I've heard
@HelpMeDevvon Жыл бұрын
I learned this from a few great engineers and decided to give it a try still experimenting with it!
@devinkei1469 Жыл бұрын
I use 2 limiters as well for mastering on 90% of the masters. Sometimes I will even throw an exciter between the two limiters to really bring the song alive.
@redgomusic Жыл бұрын
The t-shirt, brah! Where you get it?
@vancenichols9490 Жыл бұрын
I totally dig this method and will be using this on my next project! Thanks so much for sharing this content! I'm curious to know why on the 2nd limiter did you choose Mode IRC III - Balanced and not use IRC IV - Modern? Is the latter a similar mode to what was used in the 1st limiter? Sonically it works in our example wonderfully, but I'm curious to know the reason for your choice for the 2nd.
@jojoali333 Жыл бұрын
⭐️
@Dimelothaix Жыл бұрын
🔥
@kenyxkenyx Жыл бұрын
I would like to know what's the LUFS you got finally. It sounds pretty loud from KZfaq. Thanks for your work by the way.
@bigtymerbitz Жыл бұрын
Soft clip them a limiter works all the time. 😁
@najee2123 Жыл бұрын
Yoo which soft clipper do you use bro?
@HelpMeDevvon Жыл бұрын
I like Standard Clip!
@kzbeats2146 Жыл бұрын
U should make a vid on frequency masking .
@a1jthaproducer Жыл бұрын
It would be really dope if you could walk us through how & why you mastered this song the way you did. The beat isn't traditional being that it has no melody, so I would assume the same goes for the mastering to some degree. I know you roll of low end on the sides & why, but that doesn't seem like something you would aim to do on this master. I can see the chain & assume what you used which plugin for from studying your videos on mastering, but a video walking us through every decision you made during the mastering stage & even the mix stage would be very much appreciated.
@contraspower6302 Жыл бұрын
Should i use a clipper with 2 limiter?
@krispybowgod9656 Жыл бұрын
I’ve never tried the double limiter trick. But I usually use a mastering compressor for maybe 1-2 DB of gain reduction before I use my limiter so I guess that’s a similar method
@unknwngamer1 Жыл бұрын
Yeah its the same method because a limiter is just another compressor with a brickwall. I use a clipper before my limiter.
@krispybowgod9656 Жыл бұрын
@@unknwngamer1 yeah I been a ozone user for a long time I’m happy they added the clipper into the limiter tab
@camk627 Жыл бұрын
Thats the same aproach you have whith the cla 76 and r vox when mixing vocals. Its taming transients and going for volume afterwards
@coconutskunk Жыл бұрын
Good stuff devon, I try not to encourage the loudness war though..too many new engineers are worried about the loud and not the initial balance to achieve a nice loud mix
@HelpMeDevvon Жыл бұрын
Yea i understand it comes with the territory. And also these artist still want loud music unfortunately ya know. Mastering is really really hard
@I_Can_Relate Жыл бұрын
He telling our mastering secrets😳 honestly shouldn’t be a secret anyway. Let’s all make better music I need a new playlist
@Jlagenii Жыл бұрын
I notice whenever I use 1 limiter it just completely takes the life out of the song, I start getting Artifacts on top. 2 limiters is really 🔥 it helps the song breathe more
@familyfamily8479 Жыл бұрын
Do a yfn lucci or rich homie quan or derez deshon type vocal I’ve never seen nobody do it b4 like ever ❤
@BradleyGagne Жыл бұрын
How do you use your outboard gear like the Rupert Neve MBP with Ozone 10? Do you use the outboard gear first, then finish with Ozone?
@Tai-Dye Жыл бұрын
Would it be better to use 2 different kinds of limiters, or is 2 instances of the same plugin okay?
@REMRODFILMS Жыл бұрын
So is this a substitute for using a clipper instead bro?
@rhapsodyinbluez Жыл бұрын
Mr Devvon If you do this you can't soft clip right? Which one is better
@Orrinton Жыл бұрын
Hi devvon great video. I love the ozone maximizer. Quick question: Do you use true peak and if so would you recommend putting it at the absolute last stage? I like to use the maximizer last in my master chain, would you consider it "good practice" to use true peak limiting with the maximier in this case?
@fmajor_music Жыл бұрын
You don't need the true peak on the first limiter only on the last one in your chain
@mostnotorious914 Жыл бұрын
may i get a link to that vocal preset🔥
@4brvhvm Жыл бұрын
💎💎💎
@rhapsodyinbluez Жыл бұрын
So you should not leave the maximiser on? Got confused towards the end
@JustMe-ql9li Жыл бұрын
Why dont use a comp before the limiter instead of another limiter?
@pappapoppa Жыл бұрын
waves mv2 > izotope vintage limiter. what are u doing bro
@danyavilaoficial 4 ай бұрын
I use a similar system, this is my chain: SSL Master Buss comp about 3.5 dg gain reduction UAD Teletronix LA2 about 1 db gain reduction (it gives TONS of openess and colour) Waves MAGMA Tubes (beautiful harmonics, BE CAREFUL) FabFilter ProQ2 - subtle touches, MS equalization SIR softclipper _ (sometimes L2 limiter 2.5 db gain control) OZONE Maximer exactly as Devvon uses I usually achieve in well balanced mixes clear non distorted up to 7 Lufs
@mookeymontana Жыл бұрын
Bro a mastering tutorial would be nice including levels
@HelpMeDevvon Жыл бұрын
I got u that’s coming soon
@mookeymontana Жыл бұрын
@@HelpMeDevvon 💯
@ArtemViolin Жыл бұрын
🤝👍
@rhapsodyinbluez Жыл бұрын
Devvon bro you have an imposter raiding the comment section
@okaysaint 2 ай бұрын
what about lufs? It must be at 9?
@chemdrum Жыл бұрын
So what are your thoughts on the God Particle? lol Would you just stick with double limiter or clipper- limiter trick?
@AdutwumBlessing-s3u 6 күн бұрын
Guys I’m facing a little difficulties here, my final master is still not audible enough as compared to other songs, I don’t know why it’s still not louder when I increase the gain in the maximizer
@adhamessam4620 Жыл бұрын
W
@SuperFaceless1 Жыл бұрын
It feels like a layer of wool came off the music The entire song *folded* with one limiter
@HelpMeDevvon Жыл бұрын
It really brought out the excitement. Of course u sacrifice some dynamics when u limit. But it’s about trying to find the right amount! I might even back off the limiter a bit in this example!
@rickybruckshot Жыл бұрын
😉
@902beats Жыл бұрын
2 soft clippers
@mechwarreir2 9 ай бұрын
vintage limiter is NOT a limiter... it is a tape saturator + tube limiter.
@major3774 Жыл бұрын
In a previous video you said you don’t use limiters (plug-ins).You said you use hardware. But in this videos you leave that information out so there’s no way we can get our music sounding like yours without that information. Sounds like you’re just putting out stuff just to keep your KZfaq channel going to make money. If not you would show us how you really master your music with the hardware that you said you have in a previous video. I even left a comment on another of your videos asking you how do you master with your hardware but I guess that’s a secret you want to keep in order to master other peoples music for profit.
@lowke14 4 ай бұрын
u watch his 3 hour mixing vid he showed what he was doing with his outboard gear in that since you’re very fascinated do you own any outboard gear ?
Panorama Mixing & Mastering
Рет қаралды 127 М.