HEMI Engine Unboxed - Brand New MOPAR Legend

Рет қаралды 161,498

Күн бұрын

Nick's Garage Gear Shop
teespring.com/stores/nicks-ga...
--------------------------------------------------------------------------
Nick's Garage Patreon page. Thanks for your support!
/ nicksgarage
--------------------------------------------------------------------------
Nick's Garage is on Instagram!
@nicksgarageofficial
--------------------------------------------------------------------------
Nick loves Hemis, and he has rebuilt many of the legendary engines over the years. But today, is a first.
--------------------------------------------------------------------------
Nick's Garage is proud to be supported by Atlas And K Tool.
goatlas.ca
www.isncanada.ca
www.atlasautoequipment.com
www.toolweb.com/brands/k-tool...
--------------------------------------------------------------------------

Пікірлер: 556

@dcmayer2 10 ай бұрын

Can you imagine the amount of money sitting there to put that all together! Knowledge is Priceless thank the Lord!

@leelavoie6753 10 ай бұрын

Please film the building of this engine as much as you can. That would a really cool saga

@NicksGarage 10 ай бұрын

Will do our best.

@Justin-bz1dp 2 ай бұрын

@@NicksGarageĥi

@stevelioliopoulos4902 10 ай бұрын

Xronia polla Nicholaki. My birthday is this Saturday. Tuned in from Adelaide Australia

@NicksGarage 10 ай бұрын

Awesome! Thanks Steve.

@lindanelson8400 10 ай бұрын

That's going to be soooo sweet!!! Can't wait to see it on the dyno!!!

@NicksGarage 10 ай бұрын

You and me both!

@RichardMLowe 10 ай бұрын

@@NicksGarage Would "Indexing" the plugs make a difference?

@autodidact537 10 ай бұрын

@@NicksGarage Why aren't the rocker arms 'rollers?' Aren't they made for Hemi engines?

@moosemanmagee4495 10 ай бұрын

He spared no expense!

@NicksGarage 10 ай бұрын

All out!

@moosemanmagee4495 10 ай бұрын

The rings were made in Hastings Michigan.😊

@mycowboyways915 10 ай бұрын

Building an engine from all new parts. Gotta love that ! Love the channel Nick.

@bobkonradi1027 10 ай бұрын

Imagine, no greasy, gunky parts. Nothing to put in the hot tank.

@BigT27295 7 ай бұрын

Heck yea...

@raymondsmith6943 10 ай бұрын

What a great guy, Nick really knows his engines, very few folks like Nick left these days, I hope Nick lives forever. Love watching his videos, I've learned a lot watching them.

@stepanbandera5206 10 ай бұрын

👍

@joeljenkins2876 10 ай бұрын

Me too

@michaelconiglio1535 10 ай бұрын

Nick is a wonderful guy. We met him at Motorama this year. Super nice man. He knows his stuff! The best 👌

@Jdubb85 8 ай бұрын

Do you have a part number for the comp cams timing chain amd distributor gear drive? Please and thank you

@stepanbandera5206 10 ай бұрын

Definitely one of the best videos I've seen in 15 years of you tube. 👍

@4ondflor 10 ай бұрын

I can’t wait to see this go together. It’s got everyone wishing they could get their hands on a brand new hemi!

@joeljenkins2876 10 ай бұрын

I can only imagine the ‘kid-at-Christmas-time’ feeling Nick must feel when opportunities like this come!!! Building a big-inch hemi from all new parts!!!! What MORE could you ask????!!!!!!! Are you guys gonna do a buildup video of any kind on this engine? I sure hope so!!! Great week, y’all!!!! 😊

@fd797 10 ай бұрын

Yeah, you can see it on Nick's face. He was having trouble not smiling...

@sjhanson1690 10 ай бұрын

Hey Nick, I’m an old retired Auto Machinist and while I never bent over a fender, I had the fun of assembling many, many engines over the years. And let me tell you, I’ve never had someone bring in a complete engine in brand new parts. I would love going into work every day if I got to do that all the time! BTW, I walk with a cane now because of picking up all those cast iron blocks and heads so be smarter than me.

@nickpanaritis4122 10 ай бұрын

Time to take care of our Backs. We are getting older.

@ecleveland1 10 ай бұрын

I think it would be a great engine build series if Nick took us along for every step of the build. From the math to figure out how everything works together and why to the machining of the block and balancing of the rotating assembly. Then the complete step by step, bolt by bolt assembly and dyno testing and tuning. It could be a multi video series in its own playlist. I fresh clean all new build just like many of us have dreamed of doing for our own muscle cars.

@chrisrichard2526 10 ай бұрын

If he doesn't take every piece of the chinese manufactured junk and return it he is crazy. Can't believe he would put his reputation on line by trusting inferior chinese junk. Rods and crank are super critical. Chinese don't care, as long as they are selling it. Would like a show just on balancing the crank and what it takes as well as checking sizing. Same with rods. How about doing an Xray and fluxing live ?

@randalltylinski9853 9 ай бұрын

I had been away from internet access for a bit. Back now and trying to do catch-up. I like to read some of the comments on Nick's channel before diving into the video. Hit the wall when I read '2526's reply. I didn't want to believe it, but there at 5:32 "Made In China". Box looks like it has been sitting around for awhile with all the water stains. Owner probably got that crank pretty cheap. But I guess that's the way things are now. Even with American Muscle. Too bad. Well, good news; if anybody can make a runner out of junk, that'd be Nick.

@KurtfromLaQuinta 6 ай бұрын

@@randalltylinski9853 Eagle''s stuff is all made in Shinna. Unfortunately, a lot of stuff is made there these days. A lot of people run there units.. and I haven't heard of any major issues about their products so far. What matters most is how it's machined for the final product. I prefer Scat products. I'm not sure if even their stuff originates from Shinna. But they are a company that has a rep of quality stuff.

@DonRRicks 10 ай бұрын

WOW! I can hardly wait to see this beast on the dynamometer.

@sinsloth266 10 ай бұрын

Man that's some scary power. The best I've ever had was a 350 Oldsmobile in a 79 Cutlass

@OlSgtLove 10 ай бұрын

That is a wild Big Hemi , be neat to see what horsepower it puts out !!!

@dougabbott8261 10 ай бұрын

The torque is going to be absolutely massive.

@wokewokerman5280 10 ай бұрын

...and at lower RPM! That's a serious tire burner! Hope he runs fuel injection to be able to best tune it...

@OlSgtLove 10 ай бұрын

Fully agree ,it will be awesome to see this bad boy turn some rpms

@rayswann7618 10 ай бұрын

Simple things please simple minds

@mikedimaio1237 10 ай бұрын

This is exciting, the walls of the shop will be pounding with that on the dyno, I hope you can video the actual building of the engine and cover unique aspects of them.

@Bagooda 10 ай бұрын

713 horsepower! Dyno session will be sick!

@nickpanaritis4122 10 ай бұрын

I got 615 HP on my 528 Hemi with a small camshaft. This one is 541c.i. with a roller camshaft.

@Bagooda 10 ай бұрын

Dr. Nick, I believe in you! 713!!!

@Z-Bart 10 ай бұрын

Can't wait for the build and then The Dyno Test!

@NicksGarage 10 ай бұрын

Same here!

@eugenecastles7475 10 ай бұрын

Wow!!! A Hemi Monday, and not just a 426 Hemi, but a 541 Hemi stroker. A very impressive collection of parts, especially the Callies 2nd Gen block. I would have stayed with Callies for the crank and rods, so much better than Eagle. China has really messed up the American Hotrod industry. This should be a very impressive build, and I'm looking forward to seeing what numbers this engine makes on the Dyno. Work your Mopar magic Nick. My Monday is so much better with Nick's Garage. The Hemi is icing on the cake.

@NicksGarage 10 ай бұрын

Thanks for joining us again, Eugene. We appreciate your kind comments and input.

@eugenecastles7475 10 ай бұрын

@@NicksGarage I'm always impressed with the variety of the videos! You rock George. Nick still like to play with blocks, and I do too, lol.

@oneofmany1087 10 ай бұрын

Will it be Nicks Masterpiece? I think that everything Nick works on is a Masterpiece!

@NicksGarage 10 ай бұрын

Or monsterpiece? 😉

@mgcarr61camaro91 10 ай бұрын

Nick . You do a great job teaching the next generation of car enthusiasts! All the info you give out is priceless! Thanks!👍

@terryfontaine9684 9 ай бұрын

Hi Nick, I'm a retired Rceme mechanic for 26 years, I have rebuilt my share of engines, but I have never seen one brand new with all new parts, keep up the great work. Your explanation of things is very good to educate your viewers and your customers. Plus I'm a dodge guy so that helps lol..keep up the great channel.

@russellregnier5811 10 ай бұрын

Very cool. I would love to put a hemi in my Mopar but can't afford it. But I do have numbers matching 383 and that will do just fine. Like Joe Dirt says. Life is a garden. DIG IT

@MM_in_Havasu 10 ай бұрын

Absolute badassery at its finest! This engine will pound the ground for real!

@NicksGarage 10 ай бұрын

Should be a dream maker.

@petepeabody8905 10 ай бұрын

Nick it must feel good to be able to inspect, and assemble such an absolutely new motor. The aluminum heads must make your muscles feel good too. Can't wait to see this monster come to life

@NicksGarage 10 ай бұрын

Absolutely.

@jeffd3660 10 ай бұрын

wow.... that's going to be an awesome engine , Nick, please do the complete engine build on video 🙏

@nickpanaritis4122 10 ай бұрын

I am hoping I will.

@erichlausch9886 10 ай бұрын

Nice Toilet Brush 😉 greetings from Germany

@NicksGarage 10 ай бұрын

Haha. Hello Germany!

@major9991 7 ай бұрын

Hemi Nick doing what he loves and The master in building big horsepower engines!!! no wonder he's on the top restoring Muscle cars.

@user-fi9iw4gd8k 10 ай бұрын

Nothing like a new Hemi that's built by an expert like Nick. Nick Reminds me of my father. He was a master Machinist . He could build one hell of an engine. He bought nothing but Mopars.

@stepanbandera5206 10 ай бұрын

Kudos to your father! Smart man.👍

@gersonhay984 10 ай бұрын

Thats a fun job. Nice and clean. So cool.!

@NicksGarage 10 ай бұрын

It really is!

@gersonhay984 10 ай бұрын

Man it looks like Christmas.!

@kennethcohagen3539 10 ай бұрын

Please do videos on building the engine and testing it on the Dyno! I’ve built a lot of engines, but never even seen a Hemi come into any of the shops I worked for.

@25vrd48 10 ай бұрын

What every hot rodder dreams of , ordering every piece to build a 541 inch Stroker HEMI with brand new parts . And to have NICK of NICK'S GARAGE build . HOW SWEET IT IS . WOWSER , YEEHAA

@rar7631 10 ай бұрын

A brand new old time HEMI. Wow 😮 imagine that 😊. Thanks Nick!

@brettwallace1226 3 ай бұрын

I watch this more than everything else i have alway been a Mopar guy. First car was a 69 Rt charger it was beat to hell AND RAN LIKE A BAT OUT OF HELL 440 TRI POWER 4 SPEED 456 REAR END TOP SPEED 110 AND GOT THERE IN A HURRY ,IT WAS FAST IN 80s only two cars beat me GTX And a 429 boss. Mustang thank you show alway brings back good ol memories

@johnplato4976 10 ай бұрын

Nick- you're so lucky to be able to work with everything brand new & clean. The old saying- it doesn't happen every day comes true. As always, love your videos.

@scottscott6794 9 ай бұрын

Nick you had better stay around for the next hundred years we need your knowledge we need you.🙏❤

@moosemanmagee4495 10 ай бұрын

He thought of everything except the distributor!😊

@NicksGarage 10 ай бұрын

Not a problem. 👍

@moosemanmagee4495 10 ай бұрын

I'm wondering how much less it's going to weigh?

@moosemanmagee4495 10 ай бұрын

@@NicksGarage not a problem I was just impressed he thought of everything else!

@mikestackhouse9001 10 ай бұрын

This is like Christmas, your birthday and the 4th of July combined! The assembly should be smooth as glass. So many beautiful parts!🎉❤

@OlSgtLove 10 ай бұрын

You got that right Mike !!!! Big Time Holiday Season !!! I can only imagine something like this ...

@Red1Wollip 10 ай бұрын

You are amazing with your knowledge of all the engine parts and pieces.

@NicksGarage 10 ай бұрын

Thank you very much!

@dannovello1577 10 ай бұрын

Cool! Will be interesting to see how it goes together. AND runs on the dyno of course. Break in that virgin Nick!

@leelavoie6753 10 ай бұрын

A dream come true… a new engine from scratch. I’m curious to see what small issues arise. A STROKER! Can hardly wait to see your magic Nick 😃👍

@backyardbuilttrucks1 10 ай бұрын

That Eagle crankshaft says made is china right on box . Damn .

@jeepin4on4 10 ай бұрын

Never seen Nick so happy. I bet he didn't sleep all night after seeing all the new parts. Can't wait to see the build and dyno.

@danohstoolbox 10 ай бұрын

hello nick and George this is going to be a great show

@NicksGarage 10 ай бұрын

Thanks for joining us again, Danoh! 👍

@danohstoolbox 10 ай бұрын

that is some pile of parts you have there he must have passed over a big stack of cash for them

@bobkonradi1027 10 ай бұрын

Quoting Nick... "as you get older, the parts get heavier.." Amen to that. I'm 79 myself, and even the rods get heavier. I've got an old, 1st gen Desoto 330 hemi I'm working on, and let me tell you about the cast iron heads. I thought I'd need a crane to pick one of them up. The block is out of the question.

@arthurrodesiler3109 10 ай бұрын

You should always buy new cylinder heads bare. They put junk in there complete heads. Heads, crank,Block,rods all that stuff need to go to a good machine shop to make sure it is right. That will double the price probably when they find all the problems.

@Fmandan77 8 ай бұрын

I agree. I bought a set of these heads for my upcoming hemi build. I bought them bare w/ valves. I'm having a shop I trust go through the heads and make sure the guides are true and the valve job is solid. I've heard that when the valves are shut some times the stems are not sitting true inside the guide, which will cause premature wear.

@LeiDeng-iv7lz 5 ай бұрын

...don't forget to align-bore, deck height, blue print, shop peen, magna flux, x ray, tuff ride, port and polish, d- port intakes, dry sump lube, cross-hatch (which Rick just did to that cyclinder barrel),etc., hope I didn't skip anything........

@OlSgtLove 10 ай бұрын

Mannnn, that sure is super nice to have all new parts ,block ,and heads ...Then to have Dr.Nick put it together and tune it !!!!! This will be fun to watch and dyno will be great !!!!!!!

@claudinerowe2335 10 ай бұрын

Nick I think your nickname should be THE WIZ,as in Wizard for the magic you create I use to work in a Ford dealership and our shop Service manager's nickname was The Wiz he was a engineer from one of the Chrysler proving grounds in Michigan.I think you have earned the name as well.Salute.

@NicksGarage 10 ай бұрын

Thanks so much!

@danaglass5394 10 ай бұрын

Dana "60" Glass. Already can't wait to hear the brand new elephant on the dyno.

@themaddendynasty5099 10 ай бұрын

Nick I think many of us would appreciate it if you made a video series building this engine from start to finish. I’m sure you could provide great insight into building these engines

@Luigi-pk8mk 5 ай бұрын

Can't wait to see this one put all together!

@darwindwelle5267 10 ай бұрын

That guy put some big bucks into all that.

@tommontague5721 10 ай бұрын

Wow!....What a Christmas present that would be. Beats the hell out of the standard underwear, socks and tie presents. I wonder if my Wife and kids are watching?...lol

@NicksGarage 10 ай бұрын

Happy holidays!

@johncornell3665 10 ай бұрын

Pretty amazing. Brand new motor. Thanks Nick

@meowerstationone3793 10 ай бұрын

That was fun! Thanks for sharing all your knowledge Nick!

@Sherlock067 10 ай бұрын

I feel the excitement in your voice . Lots of Mopar goodies! Here we go! 👍

@ldnwholesale8552 10 ай бұрын

Nick, cad welch plugs are required, it gives something soft for the electrolysis to eat. Sacraficial annode. Otherwise it eats the bores, heads, timing cover etc. Brass welch plugs are NEVER fitted OEM as they understand this. You still need corrosion inhibitor as well as antifreeze for cold climates.

@anthonymavrick7238 10 ай бұрын

Nick's like a kid at X-Mas time. It's an early X-Mas for the Super Bee owner

@codo7 5 ай бұрын

Thank you Nick. Have fun with that!

@davidgerstung5144 9 ай бұрын

I remember way back in my garage a Keith Black roadrunner with blown engine. When we went to pull it it bent our beam had to replace with something heavier. But when it was running it was a beast. Great watching you play with all those great toys.

@joseortega1114 10 ай бұрын

I wish he went with full roller rocker arms

@markkinney5030 10 ай бұрын

Oh man that looks so cool! Sweet engine well going to be very soon!

@jowens1126 10 ай бұрын

its always great to see your videos.. your a unique character, one of a dying breed.

@andyaguirre345 10 ай бұрын

what a pleasure to have this in your shop . cant wait to see it on the dyno.

@clintperry799 10 ай бұрын

Nick is a happy man , with this build ! 🇺🇸👍

@Suzie-Q2 7 ай бұрын

Thank you, Nick. We all love you too Take care

@chrisfreemesser5707 10 ай бұрын

It'll be interesting to see how smoothly this build goes together, given how these parts were sourced from so many different companies

@americafirstmaga5073 10 ай бұрын

I wondered if he'll do a little grinding and polishing clean-up?. Clean the edges on the block, casting.?

@OlSgtLove 10 ай бұрын

Fully agree there .

@dinadaughtry8993 9 ай бұрын

@@americafirstmaga5073with Nick's attention to detail i would certainly bet he will

@fluxfirax5.56 7 ай бұрын

Man, this has to be the Christmas of a job. Love it. Make a series please!

@jeffjankiewicz5100 10 ай бұрын

Wow, Stroker Hemi from all new parts. Cant wait to see this build

@douglasb9105 10 ай бұрын

WOW! Junior year shop class in a half hour!👍👍

@johnpage5815 10 ай бұрын

Thanks Nick's it was a pleasure going through all those new parts together with you

@Ron_Masterjohn 10 ай бұрын

Thanks Nick for including us in on the unboxing of parts of the most famous engine ever built IMO. Lots of fun seeing all these goodies and Nick you are the man.

@The_Kman 10 ай бұрын

Nick, you are the Mopar Master. LOVE your channel. Much lovecfrom SW PA USA!

@greggsvintageworkshop8974 10 ай бұрын

Way Cool Nick!!! Can't wait to see it on the dyno!

@keithharris7365 10 ай бұрын

Awesome show Nick and George looks like Christmas came early can't wait to hear this one keep them coming and see you Friday

@michaelgorman4229 10 ай бұрын

I‘m glad to visit you, Nick, last Friday while I was in Montreal 😎

@durangojoe1123 10 ай бұрын

This has always been on my bucket list

@Kwaka28 10 ай бұрын

Hi Nick great show was a bit like a HEMI Christmas with the beautiful new parts.. can't wait to see you work the Mopar magic over this V8. .. ✌️

@troybadolato7697 9 ай бұрын

Can't wait wait to see the next part

@staceygandy2009 10 ай бұрын

You're right Nick. All new everything in the boxes would be like Opening a bunch of nice presents from first to last!

@arthurrose6473 10 ай бұрын

MAN! It's beginning to look alot like Christmas! "And dreams of 541 Hemis danced in their heads!"

@DVSNTHERE 10 ай бұрын

Thank you Nick!

@gtuttle4 10 ай бұрын

This is going to be an amazing build! Can't wait!

@mavericknonconformist69721 10 ай бұрын

Thank YOU Nick!

@FalconXE302 10 ай бұрын

It's like Christmas time watching all this unwrapping... and it's exactly what I want for Christmas... Great vid Nick...

@NicksGarage 10 ай бұрын

Enjoy!

@kenthawkins2418 10 ай бұрын

That's a work of art...and that's BEFORE you've assembled it!! Gonna be a beaut👍

@normanhopkins6114 10 ай бұрын

Cannot wait for the videos of the assembly.

@edsmachine93 10 ай бұрын

Very nice Nick. This certainly is going to be a good Hemi build. Thanks for sharing. Have a great day.👍💯

@petergoodwin2465 10 ай бұрын

Probably the first time Nick hasn't had to rebuild a destroyed engine. Definitely keeps me going and inspired to finish my wifes rusted out blown up impala that was supposed to be %95 restored. Dam thing is making me enjoy making panels and parts. You're a legend Nick.

@stevepoore2322 10 ай бұрын

I can`t wait to see this on the dyno! Thanks Nick!

@NicksGarage 10 ай бұрын

You bet!

@BigT27295 7 ай бұрын

Nick is Definitely the man for the job.

@Paul1958R 10 ай бұрын

Nick, Thank you for bringing us along. And please bring us along for the build to the extent possible. Wow the cost of this engine is way above my dreams. The bare block alone is $6500 Paul (in MA)

@jerrylopez1294 10 ай бұрын

That’s awesome Nick!

@ronwelch6548 10 ай бұрын

I can not wait to watch you build that sweet Hemi. The master with new parts. The cam bearing install I have memorized from a previous show. Take care and keep going.

@NicksGarage 10 ай бұрын

Thanks 👍

@bobdavis3357 Ай бұрын

Nick is the King of Mopar!

@dinadaughtry8993 9 ай бұрын

Oh yeah, thanks for sharing this incredible build,i bet you far exceed 600hp and the torque is going to be off the charts Skittles said he can't wait to see it on the dyno,4.5 inch bore what a beast

@donlemme898 10 ай бұрын

Cubic dollars baby!💸💸💸 Kudos to the owner getting all the best components for this build. Looking forward to this one for sure!

@1SeanBond 10 ай бұрын

A awesome engine! You got to love a Hemi! Appreciate your efforts and quality content thanks Nick Luv&Peace Cheers to continued success friend 🤝🏼✌🏼💫

@spudthompson1414 10 ай бұрын

I used to from them running Nitro to my last one 512Hemi in my last car I will ever build my 62Belvedere cancer savior 24 years now and don't have the strength to do anymore and I miss it really bad carry on Nick love watching your show brings back memories thank you Ser !

@blinkie1523 10 ай бұрын

That's going to be one cool and clean Hemi Nick, can't wait to see the build and dyno testing either.

@NicksGarage 10 ай бұрын

Can't wait!

@KENNEY1023 10 ай бұрын

This is a great opertunity for us to see what it takes to put together a new engine. Then see it dynoed and running. I hope you get to put it in the car and drive it.