Good job. Well done. Keep that DIY spirit alive. You know that our fathers and grandfathers never paid for anything they could DIY.

Dude ,you have any ideal how many custom shops are side eyeing you now?!? And 40 people that disliked this video are straight Busters.

2:35 my guy tooted 😂😂🙌💀

Well done bro. Looks amazing. And like you said it's all about saving mula and doing it your self. Love it

Thanks. It was good to see it done from your point of view. Really got a feel for how to do it and the difficulty level.

Looks good man, you did a really good job. Im about to do the same on the inside of my 94 land cruiser

You did a really nice job. I watched 2 Herculiner videos and they look so bad I almost gave up on it. But watching yours I will do it myself now. Thanks for doing this the right way!!!

I appreciate the video thanks for posting this! I have a 2019 Silverado I’m currently deciding what product to use on, and leaning towards Herculiner for sure as there is no mixing, etc. I’ll use a tray, and tape and cover everything because otherwise I’ll get it everywhere, but you showed how easy it is to work with. Thanks again. 👍

Another pro tip- peel your masking tape off while it's still wet, to get a much cleaner line

Nice video, great teaching skills and you are a good speaker too. The bed came out great!!!

Was planning on taking my plastic bed liner out and doing herculiner this spring, ill use this as a reference, looks very good, thx.

Looks good man thanks for the tips, gonna do this to my '79 Elky for when we put parts in the bed.

Great video - inspires confidence for others!

you do the best rollin bed liner ive seen, between the herculiner and your technique it looks the best. herculiner should send you a fat check. thanks for an in depth video. great job!

Good job man, simple, cheap and it will last!

Looks amazing!!!! I’m gonna do this to my truck bed soon on my Dodge just gotta find the right day to!!! I’ve been watching videos to see how others are doing it and wow!!!! I love it!!!!!! You did great!!! Looks professionally done!!!!!

Looks good man. I have a 2018 tundra that i actually use as a truck. I keep the body paint like new but I've already beat the bed into primer and metal in some spots. I was go going to pay big money to have this done but after watching this video I believe I'll just do it myself.

Thank you for this video. I subscribed to your channel. This was very informative. Also thanks for the hint about longbeds about to do this to my 99 Dodge Ram

I like that you did the tops of the bed rails!

Good job primo! It looks real good 👍

Looks great. Great Job. Thank you for sharing.

De todos los videos que eh visto este es el mejor te felicito gracias 👌🏻👍desde North Carolina 🤝🙏💯💯💯💯💯

Looks great bro! Thanks for the vid.

Great video, really answered all my questions... looks great too,

Looks great. I did it to the inside of my enclosed trailer. Now, on a stepping board for the trailer.

Looks great! Thanks man. Going to save the money and use this! Project time lol

Awesome job!

Going to pick some up next pay check. Thanks

Nice job...just bought a used 2010 Silverado with no bed liner. My old 2005 Silverado had a coated bed that I gave to spray jobs to. I'm going to try the Herculiner on the 2010. Nice job.

Nice fart @2:34 lmfaooo

Well done good job!

Looks damn good. Good job man.

Bout to do this to my Ford Ranger, thanks for the vid man

Thanks bro for keeping the DYI spirit alive .. like you said why pay somebody else 400$.

Great video, I’m sanding mine now, almost down to bare metal in some spots but 🤷🏽‍♂️ who needs paint back there anyways

Nice video, man.

Looks very good 👍🏻

Nice job man

Great video, thanks!

Looks good great video.

I took mine pickup to a professional Rhino bed liner dealer ~ MAN ITS EXCELLENT 👍 The pickup is 2000 Chevy Silverado. It was done in the Rhino spray liner 21yrs ago! It has never flake, peel, cracked, nor wear off! it kinda faded a little to a dark gray and not the tar black color any more But Its Awesome > It was worth every cent i paid for having it done PROFESSIONAL ! Only way is sand blast the bed to give the metal texture for the liner to hold ! Then they splatter it, with a smooth texture. then spray paint it

I like my raptor bedliner much better, but you can't beat herculiner in price. Looks good. Awesome video!

Man looks good

I only three suggestions. One, I’d try rolling it on out of direct sunlight to prevent it from drying quickly, two I would peel the tape off right after your last coat to prevent it tearing and leaving little pieces, and finally keep us posted on this stuff! Lol. Great video man!

idk why they don't do this at the factory? On all vehicles and under coat em as well, Build em cheap sell them high

Looks great

Gracias por la información, muy bien explicado, saludos

Thanks for the video!

I wish to see many of beds after 10 years after the bed liner been used and how hard used.

You do a great teachings! Great job! Now tell me how you got that tailgate latch on the inside of bed, THAT IS AWESOME!!!

Invest in a rolling pan to put paint liner evenly on roller

very well spoken sir, and informative. 07 Titan

Looks mint

Durabak sucks, Duplicolor sucks.... Herculiner has the most texture and is very thick and strong. Try to do 2 coats if you can. 1 coat on a bare bed isn't going to give you thick enough protection. I'd buy 2 gallons and do 3 coats to be safe. Let dry between coats. Herculiner is definitely a good product. You must scuff the paint heavily and clean with acetone or it won't stick.

Great video homie thanks ✊🏻

Good good job bro

Great video and thanks for this valuable information....how long did it last or how often you need to reaply. Thanks

Yeap good looking out bro

I’m thinking of trying this out. The factory coating on my bed is worn out. It looks like yours did. How has this stuff held up after this video?

Can you give a long term review of this plz

Pretty sure this one turned out looking fine because he did it on top of the old liner. It will Probably peel though when the old liner starts peeling. I always heard you have to peel the old liner to apply another one.

AWESOME!

Looks good 👍

Hi there. How long it take to dry for the second hand.

My friend and I did Herculiner on his 96 Silverado back when the stuff first came out in the 90s. It took two gallons to make the long bed look right. Thing was up in Colorado, the UV rays beat it down to a grey color pretty quick. I did my S10 with Durabak. It's about twice the cost, but it comes in colors and has a UV stabilizer. I still have to re coat it every other year. Haven't done so since 2011 and it's looking pretty rough. The Linex on my Suburban has held up extremely well in the 3 years since I had them spray it. Like you say, if you're willing to DIY, there are options out there that don't require a compressor or sprayer.

I used a wire brush on my drill to scuff it. A lot easier on my back and quicker.

Should I remove the plastic of the bed and apply directly on the metal?

you should have tried bullyliner

How long will it take for the second coat. In the same day?

Did you put primer on any of the spots that was metal or rusted, or you o ly scuffed it?

i hav the hurkuliner i got it today definetly waching

Maybe you have already answered this but I couldn’t find it in the comments. How did it hold up? Is it a good product?

How is it holding up?

Dude ! Good Job. But,,, Do the corners with the brush ‘FIRST’ !

Not bad at all brother

Couldn’t you use a freacking tray ?!?

So you just used this out of the can? No primer first?

how long did it take you to complete?

Hell yeah!!! I'm going to do the inside of my jeep... why not.

Good work man! Which sand grit did you use ?

How much did you have left over?

Would you put the coating on the roof of a truck, my paint is bad and I made a custom roof rack?

Still watching why does it look clumpy? When layering it on little bumps

When you let it dry and get ready to put on the 2nd coat do you get on the bed aNd step on it.

Hey bro can u found this

Awesome for under 100 bucks. They are charging 500 bucks in florida for this

Have this in my current bed but I got a new bed for my truck and it just got SPRAYED with raptor liner

Is your truck bed aluminum ?

Did you just clean the bed with soap/water? Just got a 2nd gen ram and doing this but wasnt sure the best way to clean the bed out

i prefer the paint rather than the spray Its thicker LOOKEN GOOD MAN > Only thing it really needs bare metal, if the paint flakes so does the bed liner > The Rhino sand blasted the bed then spray it, But that was 500 dollars 18 yrs like the day they did it he hee LOOKS BRAND NEW GOOD JOB

Curious how it's holding up. I did this and mine turned to shit. It started peeling off after a couple years.

wow.

1 coat?

start from the front of the truck work back do rails last dab with brush not full strokes

So just curious how long was the original liner on there before it started fading White? Also did you consider going with raptor vs herculiner or did you just stay with herculiner cuz that's what you had on there?

Doing my today and did not get one drop of that crap on me. Not sure why everyone is covered in bedliner when done. Put the roller on an extension pole and you can just stand at the tailgate and do 90% of it. Most broom poles are the standard thread as the paint roller and will work too. Theres zero reason the have to climb into the bed to do any of this. Then lean over the side of the bed and hit tight corners with the brush.

This is very simple.. Basically just like painting with reg paint. NO brainer... Just time.

Me suscribo

Does this stuff dry hard or rubbery and able to peel off easy?

Gonna do this to my Tacoma