i like the burnout instructions on the sun visor :)
@JAMIE_ATKINS3 жыл бұрын
Lol
@Nethter3 жыл бұрын
I want cams and a tune so bad but I don’t want my vic to be real loud I just want it to be a fun daily driver. What’s your 0-60 time? And btw idk why I clicked on your playlists but nice music taste, specifically aic lol. Rip Layne.
@psyker43212 жыл бұрын
I have a similar build. 0-60 is mid-high 6s with the stock TB and headers. Kept up with a 2021 mazda 3 turbo
@mibd781223 күн бұрын
They got 4 cats just put a magna flow on. It will give a low growl when you gun it
@1972mercurycougar3 жыл бұрын
Got to find that 03 Grand Marquis video; 351C Edelbrock aluminum heads, Holley sniper, h eaders duals, 3.50:1 9" Trac Lok C6.Beefier sway bars and links, No Panther should drive that well!! Talk about a drifting machine!
@lawofliberty35172 жыл бұрын
Like it. Getting ideas for my 01.
@Sub4CarClips2 жыл бұрын
You ever think of getting a turbo? I think that’d be sick
@JAMIE_ATKINS2 жыл бұрын
I would love to add the adtr vortech bolt on kit...
@jakefitzpatrick85504 ай бұрын
What vic is it with the floor shift
@StockTurboN2029 күн бұрын
An LX
@1972mercurycougar3 жыл бұрын
I love this video too!! Currently have 2004 Town Car 3.27 rear better than my Mercury s 2.73:1 for sure. You got the 3.55:1??
@JAMIE_ATKINS3 жыл бұрын
Chris, using a motive 4.30 gear set
@yeanah25713 жыл бұрын
@@JAMIE_ATKINS you're brave, that's a LOT of gear
@OsakaBancho2 жыл бұрын
@@yeanah2571 Not for a car with overdrive it's not
@yeanah25712 жыл бұрын
@@OsakaBancho 4:30?? 65, even in overdrive has got to be pretty high. For a daily, that would be overkill
@OsakaBancho2 жыл бұрын
@@yeanah2571 With the standard Crown Vic tire size the engine would turn 2500 at 65 mph and 3000 rpm at 80 mph. Perfectly acceptable for a street car.
@DrSales-zl3kq Жыл бұрын
Nice.
@j.t.cooper29632 жыл бұрын
Sweet. 👍🏻😎
@beskiiugh7376 Жыл бұрын
You don’t mind telling me you’re wiring harness set up?
@busce25762 жыл бұрын
i literally need this sound for my crown vic lmao what exhaust are you using
@JAMIE_ATKINS2 жыл бұрын
Obx (looks knock offs) long tubes with an obx 2.5 inch catless x pipe into magnaflow mufflers and 2.5 inch tailpipes out to the bumper
@CobraR1993 Жыл бұрын
@@JAMIE_ATKINS explains why it sounds so different. Nearly 99.9 vics even with aftermarket exhaust are H piped but this is x.
@DStabs7202 жыл бұрын
You have the best name on KZfaq hahaha
@JAMIE_ATKINS2 жыл бұрын
Lol thanks...wife's a comedian. Her idea.
@baird5776mullet Жыл бұрын
Nice, do you have it locked in 1st gear?
@JAMIE_ATKINS Жыл бұрын
Ist is pretty short..lol. it's in drive. 1st into a bit of second in this clip
@tomorrowcomestoday16212 жыл бұрын
What oil weight would you suggest for a mercury grand Marquis 1997 4.6l v8 that I just purchased, with 100k miles from an old guy.. He told me he used dino oil, 15w40, 20w50, etc all the time since he bought it.. The owners manual calls for 5w30. I was thinking 5w30 from super tech synthetic what do you think
@tomorrowcomestoday16212 жыл бұрын
Api sp specification 5w30
@JAMIE_ATKINS2 жыл бұрын
I use whatever the manufacturer recommends. Especially an overhead cam configuration. Even if the engine isn't a variable timing type or uses oil pressure with actuators. If Ford insists that you use a 5w20 with this 2009 I figure there are good reasons. If nothing else, gets oil to the top of the overhead cams and timing components more efficiently tha. A heavier weight. Just because I do something a certain way doesn't make me an expert...
@joe73510 ай бұрын
12:1 afr aint a little fat for these? I was thinkin 12.7-13.0 would be the sweet spot
@JAMIE_ATKINS10 ай бұрын
The tune was tweeked after that. But doesn't matter now. Sold it last spring then the guy totaled it
@joe73510 ай бұрын
@@JAMIE_ATKINS damn man, that sucks.
@markgoesbark7465 Жыл бұрын
What size tires did you have?
@JAMIE_ATKINS Жыл бұрын
315 35r 17 on the rear.
@j.arreola2 жыл бұрын
We’re did u get that center console?👍
@JAMIE_ATKINS2 жыл бұрын
It was a local Craigslist deal. A guy was parting out an 05 Grand Marquis. I re carpeted and painted it to go with what I had
@sadejacobs8966 Жыл бұрын
What's rearend gears are u running
@JAMIE_ATKINS Жыл бұрын
4.30 with one inch shorter tires than stock. Feels like a what a 4.56 would with stock height tires
@rigoarredondo19862 жыл бұрын
How can I get those cams?
@JAMIE_ATKINS2 жыл бұрын
You can call hitech motorsports in Elk River MN. Comp came also has a similar grind/spec for a modular 2 valve
@calimerc2 жыл бұрын
Whats your top speed with 4.30 gears ? I have 3.73’s with trickflow heads and stage 3 cams
@JAMIE_ATKINS2 жыл бұрын
Not sure on that. Never had it out in the open to try. Cant afford a huge ticket either. So you've done what I've always wanted to with those heads a d cams...how in the hell do you get away with that in Cali???
@calimerc2 жыл бұрын
@@JAMIE_ATKINS lets just say i know a guy hahaha fastest 0-60 ive gotten was 5.95 secs i still need to install some longtubes and nitrous
@KyrieEleisonMaranatha3 жыл бұрын
So just a cam, tune, gears? Higher stall torque converter? Jmod? NA?
@JAMIE_ATKINS3 жыл бұрын
yes N/A. Hi-tech stage 2 cams, Headers, 2.5 inch exhaust,underdrive pulleys, edelbrock vic jr. intake, twin 60mm throttlebody/ported Dragon oval plenum, 3800 stall, J-modded Valve body with a Sonnax sure cure kit, 4.30 rear gear, axel tubes trued and welded to diff housing, detroit trutrac, lowered, eibach front and rear sway bars, and dyno tuned
@KyrieEleisonMaranatha3 жыл бұрын
@@JAMIE_ATKINS yes sir, murica. 💪🏼
@KyrieEleisonMaranatha3 жыл бұрын
@@JAMIE_ATKINS i got an 05 town car with 98,000 miles, I jmod the trans and a year ago. I got cold air intake and marty tune. Obx headers and i just bought two turbos off a couple junkyard 2.3 liter engines. I'm about to run all that this weekend. Picked up two intercoolers from a lancer. Twin turbos this weekend for under $300 🤣🤣🤣
@JAMIE_ATKINS2 жыл бұрын
also had a set of custom tubular rear control arms made. still using oem watts link.
@Trapjumper Жыл бұрын
@@JAMIE_ATKINS can that go in a 4.8?
@sademitchell1073 жыл бұрын
What year Vic ?
@JAMIE_ATKINS3 жыл бұрын
2009
@ChronicEye3 жыл бұрын
what mufflers?
@JAMIE_ATKINS3 жыл бұрын
2.5 Inch Magnaflows
@marcinzawada89663 жыл бұрын
Numbers +/-?
@mgmnfld31092 жыл бұрын
😳
@krownvikkhris30043 жыл бұрын
What all mods do you have?
@JAMIE_ATKINS3 жыл бұрын
Hi-tech cams,victor jr. intake, twin 60mm throttle body, headers, 2.5 inch exhaust/magnaflow mufflers, 3800 circle D multi disc, 4.30 rear gear, detroit tru-trac limited slip, lowered, ebach sway bars etc.
@krownvikkhris30043 жыл бұрын
@@JAMIE_ATKINS ok sounds awesome and performs awesome as well, what are your shift points with your Cams? Did you do any work to the heads?
@JAMIE_ATKINS3 жыл бұрын
@@krownvikkhris3004 didnt touch the heads. the engine is stock otherwise. Shift points are set at 6k.. rev limiter is set at 6400. Ive got a floor shift so I can manually shift and hit rev limiter if Im not careful
@krownvikkhris30043 жыл бұрын
@@JAMIE_ATKINS ok, good deal. 💪🏾
@TerryByrdJr3 жыл бұрын
@@JAMIE_ATKINS you still running stock valve springs?
@skrip21432 жыл бұрын
Mods?!?
@JAMIE_ATKINS2 жыл бұрын
-Hi-tech stage 2 cams -Edelbrock victor jr. intake -Moddified and ported Dragon Oval upper plenum -twin 60mm gt500 throttlebody -steeda underdrives -OBX stainless headers/2.5 inch X-pipe with magnaflows and tailpipes -Circle D pro 3 multi disc 9.75 incc 3800-4000 stall torque converter -Rebuilt and J-modded 4R75E/ valve body with a sonnax sure cure kit installed -axel tubes trued and welded to differential housing -detroit trutac differential/w a Motive 4.30 rear gear set -lowered front and rear -eibach front and rear sway bars -custom tubular steel rear control arms
@skrip21432 жыл бұрын
@@JAMIE_ATKINS wow nice build bro
@JAMIE_ATKINS2 жыл бұрын
@@skrip2143 Nothing fancy or extreme but everything combined makes for a fun ride. around town or cruising, believe it or not. the chassis handles so good you'd be surprised. you can push it hard in corners. it's tight and stays super flat but just sticks to the pavement
@JAMIE_ATKINS2 жыл бұрын
I forgot to add that I do have solid steel tubular rear control arms and poly bushings but am using the stock watts link
@skrip21432 жыл бұрын
@@JAMIE_ATKINS that’s a lot of gear tho I think I’m gonna go 4:10s since I’m gonna be daily driving and a good amount of highway cruising
@manuelpadilla76292 жыл бұрын
Is that all you got my quad does better burn those in that shit
@JAMIE_ATKINS2 жыл бұрын
Lol yeah that's it tuff guy
@Imtheman33 жыл бұрын
Weak
@JAMIE_ATKINS3 жыл бұрын
LOL, Yeah, it is. I will never argue that it isn't
@manuelpadilla76292 жыл бұрын
Is that all you got my quad does better burn those in that shit