High speed levitating motor

High speed levitating motor | Magnetic Games

Рет қаралды 1,605,832

3 жыл бұрын

A levitating homopolar motor, this is an experiment that I did for the first time 5 years ago with great difficulty, today, with better, more powerful and copper-coated magnets I am surprised at the simplicity with which I have achieved an incredible result. The engine is so powerful that the rotor easily explodes for rotation.
These are the magnets used
Copper Coated Discs sumag.net/s-15-08-k-x01
Disc with holes sumag.net/cs-s-15-04-n-x01
Galvanized parallelepiped sumag.net/q-18-15-10-z-x01
Thanks to Supermagnete.com for providing me with these free magnets.
The polarity of the magnets near battery is very important. I try to outline the position.
S-N battery N-S (With this configuration wheel on one side)
N-S battery S-N (With this configuration wheel on the other side)
S-N battery S-N (Do Not work)
N-S battery N-S (Do Not work)
The 18650 lithium-ion battery also played a key role in making the engine reach this speed.
The link to my old homopolar levitating motor video
• LEVITATION OF HOMOPOLA...
Thanks to Sound Effect Channel for the SloMo audio effect / channel
LIKE & SUBSCRIBE HERE: bit.ly/Sub2MagneticGames
WATCH MY TOP VIDEOS HERE: bit.ly/MagneticGamesTopPlaylist
On my channel you will find all the ways to have fun with magnets divided into 3 main categories:
Classical magnetic experiments such as magnetic levitation, homopolar motors, small magnetic weapons, Gauss cannons, gears, magnetic field viewers and much more.
Satisfaction video like the construction of magnetic sculptures, slime and magnetic putty and product review.
ASMR relaxing videos to watch but above all to listen preferably with stereo headphones to be able to appreciate the particular sounds of the magnets
Follow me:
www.magneticgames.eu/
Facebook
/ magneticgamesit
Instagram
/ magneticgames_it
Twitter
/ magneticgamesit
About Magnetic Games:
All ways to have fun with magnets.
The magnetism has always intrigued me. The strength of the magnets is scientifically explainable but there's something "magical" about its interaction with the world. My Channel offers you curious experiments and fun games to do with magnets.
High speed levitating motor | Magnetic Games
• High speed levitating ...
Magnetic Games
/ kappaquellobello
#magneticgames #homopolarmotor #levitatingmotor

Пікірлер: 770

@WuKingdom1 3 жыл бұрын

I just stumbled onto your channel (or maybe I was drawn in by a mysterious force of natur...ok, I'm done). I love the simplicity of your content. It's a lot like how some illusionists do their acts: They don't tell you what they are doing before they do it and it adds to majesty of the act. You've got a subscriber in me.

@spencerplouzek2126 3 жыл бұрын

same

@user-uw7ne3gk2z 3 жыл бұрын

Щльмып

@user-uw7ne3gk2z 3 жыл бұрын

Дт

@user-uw7ne3gk2z 3 жыл бұрын

Дта

@user-uw7ne3gk2z 3 жыл бұрын

Щхдрффыавфф

@keezo1234 3 жыл бұрын

Who creates a battery brand name called “UltraFire” Doesn’t invoke a whole lot of confidence 🤣

@rummy9464 3 жыл бұрын

Thats a high watt powerd laser pointer battery name...

@rainbowhyena1354 3 жыл бұрын

Ultrafire's cells are used and repacked into a new beautiful heat shrink. And it can really catch a fire if you expect a lot from this cells. Li-ion cells are produced only in large factories, in large batches for industrial applications. If industrial heat shrink replaced with branded heat shrink, it is totally pig in a poke.

@AfonsoBucco 3 жыл бұрын

the target audience does not want confidence

@praveengasti0808 3 жыл бұрын

Ha ha ha ha ha

@regun2434 3 жыл бұрын

Lol so someone really buys those crappy ultrafire cells 🤣

@DracoOmnia 3 жыл бұрын

Using a screw is causing some of your mishaps, the screw is catching on that anchor point and lifting its self out, using a nail or otherwise smoothing down the screw would decrease that failure mode.

@antonzhdanov9653 3 жыл бұрын

It's not a main issue. If rotation direction is correct it makes screw dig into panel, so it consume some energy, but actually makes additional support for perpendicular force vectors. Main issue is that his magnet rotor is not perfectly centered and balanced, so it creates perpendicular force vectors which meanwhile brokes his rotor.

@cc_256 3 жыл бұрын

@@antonzhdanov9653 i wonder how it would perform if he wrapped whole thing with something that would keep whole construction in one line (plastic tube?) with just some free holes so he can attach wire.

@antonzhdanov9653 3 жыл бұрын

@@cc_256 Friction is a b*tch. He needs just perfectly balanced rotor, that's all. If magnets are uniform, just kind of rod in the center of construction would be fine. Magnet spindle based on this tech can obtain 100k rpm and higher actually. And this thing exists already

@0niKingu5ama 3 жыл бұрын

@@antonzhdanov9653 you say it exists already? What is it called specifically, if I may ask?

@antonzhdanov9653 3 жыл бұрын

@@0niKingu5ama Google electric spindle. Concept behind it is very similar to one used there. It often used in drills for industrial workbenches

@user-vi4pg2yf3n 3 жыл бұрын

Просто наденьте сверху термоусадку, они не будут разлетаться. Можно сделать небольшие прорези в ней, или сделать дырочку в нее провод просунуть который вокруг магнита обмотать. И намотать по кругу сверху термоусадки. И можно будет обороты замерять

@user-tu8gj9bb9c 3 жыл бұрын

шо він ліпить?

@kenswireart88 2 жыл бұрын

Just this concept alone deserves a team to work on daily for years with all the proper financial backing

@Sofia-qn6fs 3 жыл бұрын

Magnetics is so amazing a real marvel of nature. So creative and satisfying. Amazing science video 🤗

@bobbyjones6258 3 жыл бұрын

SHUT UP

@leadabo 3 жыл бұрын

So very cool! So enjoy watching the process ... thank you! 1:04 Love that surreal moment 2:15 Ready for takeoff Captain 2:20 aaannnd we have liftoff!

@user-co3me5fn9v 3 жыл бұрын

В трубку прозрачную засунуть. Фальгой проводники от магнитов наружу. А если со свободной стороны вентилятор от компа маленький, чтоб прижимал к упорной пластине, вообще 🔥🔥🔥 будет.

@user-hu9ko7er2h 3 жыл бұрын

При чём вентилятор, весь этот движок не имеет смысла.

@user-co3me5fn9v 3 жыл бұрын

@@user-hu9ko7er2h почему не имеет? Пыттивы1 ум найдёт применение. Особенно если батарейку можно на диэлектрик с коктактными пластинами заменить. Какая скорость какая мощность не понятно но во тому с какой скоростью он будет крутить вентилятор можно сделать определённые выводы

@user-hu9ko7er2h 3 жыл бұрын

@@user-co3me5fn9v , батарейку он замыкает накоротко, сколько она протянет?

@IDG789 3 жыл бұрын

Тогда чтобы не разлетались магниты поставить ещё и в верху жестянку с 4 магнитами.И попробовать влево запустить, чтобы происходила потера массы.

@MagnetTricks 3 жыл бұрын

Cool refilmatization, reminds me of the good old days. Hope you attract a lot of views with this.

@zeronamenata4757 3 жыл бұрын

Did the channel change at all?

@MagneticGamesIT 3 жыл бұрын

I hope so too ... I want to do other experiments ... but I think I'll do them anyway 😉

@JozeeVlogs2013 3 жыл бұрын

@@MagneticGamesIT 11244

@Secarious 3 жыл бұрын

Can we all just appreciate magnets for a moment. Like *that's* impressive.

@1014p 3 жыл бұрын

They literally emit power. Also focus radical energy in the air by the field they make. Im curious on whats happening here. Been researching magnet tech for a while. This is a new experiment concept. I have an idea positive energy is in one field. Negative in the other. Then the wire causes is to properly flow electrons based on how the wire is set in the magnetic fields.

@j3ckl3r 3 жыл бұрын

put the entire assembly in a tube to keep it together and put some brushes against the ends. if it inevitably becomes unstable at too high of an rpm you could try using a device (like a gear box) that would move the brushes so they only come into contact with the magnets momentarily so that it can never reach the max rpm. Then it should continue to spin until the battery dies. Then you need to find a way to do that with a battery that charges inductively, and add a flywheel to store power.

@sinner_007 3 жыл бұрын

Это новый шуруповёрт? Оригинально...

@englishhuman7422 3 жыл бұрын

Нашел применение. Молоря

@mrgcav 3 жыл бұрын

You have a simple electric motor here and a magnetic bearing. But very cool looking. It fails due to centripetal force being out of round. However if you mounted the wire in the same position instead of holding it above the magnets, letting the wire rest naturally on the magnets... Then epoxied the magnets together or put them in clear thin plastic cylindrical sleeve. It would be more stable. The Sleeve version would require four pieces with space between two sections so that the wire can connect. Solid wire is probally better. To control the speed, 2-6 short strips of scotch tape could be applied around the magnets circumference to create an intermittent connection.

@user-vd4ew9fg8l 3 жыл бұрын

モーター開発者もビックリ！これをつかった、モノづくりに注目ですね

@XM1nd 3 жыл бұрын

Насчет магнитных двигателей главный вопрос - как долго сохраняется намагниченность магнитов, чтобы сохранять магнитное поле необходимой мощности для работы двигателя? Такой эксперимент очень важен. Чтобы знать, может такой двигатель работать полчаса или год (условно). А то в ДВС бензина долил и работает дальше, а в магнитном "севшие" магниты менять слишком геморно.

@mads2858 3 жыл бұрын

The dude probably creamed his pants getting the footage of how neatly those pieces landed

@simontang8733 3 жыл бұрын

Amazing, without watching how you making those magnets works in such incrediable ways won't believe the power of magnets are so powerful and scalable.

@vivianhayes6865 3 жыл бұрын

I think we invented the spaceship in the future.

@user-tk5fv7el7p 3 жыл бұрын

Электродвигатель не вышел, fool

@codmxdude487 2 жыл бұрын

Anything 🙄

@swayamdubey7513 2 жыл бұрын

For that u have to filled your route by magnet

@rogeryoung2567 3 ай бұрын

i would like to see you do this again ,but don't use a threaded screw as your center pin (it is causing an offset / grabbing effect) use something smooth like a nail or the ball filler air tool also tape or put the batter and magnets in a tube so they cant come out of alignment . make a jig and have a full 360 degree containment field for the mag bearings. then add some rpm tape and a reflectance rpm meter. apply the electrical connection from the end center points so your not loading the sides. use a variac or old school car headlight dimmer to control the current and voltage applied .

@kzookid2051 3 жыл бұрын

I always end up with a big grin when I watch your videos. Some things in the world are just too awesome to ignore. Thanks for sharing them with us.

@Alex-tc2bi 3 жыл бұрын

Закрепить скотчем чтобы отцентровать магнит на элементе питания и более точнее зафиксировать точку опоры самореза, лучше заменть на более короткий саморез, чтобы погасить вибрации при люфте

@kavsoft99 3 жыл бұрын

Мужик купил себе игрушку😂. И так случайно открыл вечный двигатель👍👍👍😂

@user-de5lj4dh1x 3 жыл бұрын

Пока не сядет батарейка.

@user-nq1iv7ws1x 3 жыл бұрын

Он не вечный. Используется батарея. Тема не новая.

@petristerone9373 3 жыл бұрын

What?Why are russian people in English video?

@geniusoftheworld888 3 жыл бұрын

@@petristerone9373 KZfaq has a translator и да я сам руский)

@user-lr8hd5qi6n 3 жыл бұрын

@@petristerone9373 English is too primitive to discuss science

@user-mc2su2wy1t 3 жыл бұрын

Дожить бы этих дней, когда можно будет ездить на таких двигателях.

@floks700 3 жыл бұрын

а смысл? трение в обычных подшипниках ничтожное, полпроцента. подшипники изготавливаются уже более ста лет. А линейные магнитные двигатели и так в магнитной левитации применяются (маглев)

@user-lr8hd5qi6n 3 жыл бұрын

Мужик, это униполярный мотор. Ему 100 лет в обед. Одно из его свойств доказанное экспериментально не признается официальной наукой, потому что эти любители математики понятия не имеют об устройстве объективной реальности.

@floks700 3 жыл бұрын

@@user-lr8hd5qi6n а какое расскажите кратко. мне в школе, после моего вопроса об уравнениях максвелла, физичка тоже ответила, что пока слишком много непознанного. вот прошло 40 лет, а ответов нет - больше вопросов. ) кстати посмотрите здесь ролики разные, почти все старые физики, в том числе наши, российские, признаются, что не знают реально, что такое электричество, слишком много противоречий в офиц. науке ))

@floks700 3 жыл бұрын

@@user-lr8hd5qi6n вася, это не униполярный мотор всё-таки, полюса у элемента питания 2. это типичный магнитный ротор. постоянного тока.

@_partizan_8816 3 жыл бұрын

Если взять магниты диаметром побольше и положить эту батарейку на металлическую поверхность она придёт в движение.Так,что это униполярный двигатель!

@andreyfillipov2483 3 жыл бұрын

This is just one interpretation of the" Mendocino motor". And do not forget to remind the audience that in this situation-the battery is heated, which can be extremely dangerous !!!

@prashantmeena7753 3 жыл бұрын

These kind of things made me love science 😍❤️

@user-yw1gh1nc2w 3 жыл бұрын

А почему ему нельзя было просто склеить магниты????????? Я жду продолжения 🙂👍

@oscarmaldonadonyc9089 3 жыл бұрын

Beautiful, my dream is that the trains of New York City MTA go right through magnetic rings , basically like what you showing, trains will be hold by super magnetic all around , making the trains suspended, levitated, flying, fast, sun powered, clean, etc

@kenswireart88 2 жыл бұрын

But if magnets that powerful malfunction it can rip people into shreads. People will have to wear something to balance the opposing forces.

@TheTruthPlease100 3 жыл бұрын

But you need stabalizing magnets on all sides! Look up magnetic bearings. Your high speed creates a momenum wobble so stabalize both ends with magnets on top and bottom. :)

@hemedia7082 3 жыл бұрын

@John Beck Yes, I have found a two, three or four sided support system works ever better.

@andrewmcphee8965 3 жыл бұрын

I love magnets, they have an awesome mysterious force. Thanks for the video!

@gary.richardson 3 жыл бұрын

Great video! The high speed filming was a great share of analysis. It would be interesting to observe RPM at failure and also tackle issues with balancing. My guess for improvements without supergluing the joints or securing in some kind of wrap is to focus on balancing the battery first. I would do this by marking dashes radially around the battery and other suspect imbalances and use the high speed filming to identify weight distribution. After identifying where the wobble is coming from through high speed analysis. I’d document the max RPM before failure then use a sandable adhesive like JB weld to fine tune the balancing. It would be interesting to see how much faster it can spin before failure. I don’t know how well this would work but it sounds like a fun thing to try.

@highkey4316 3 жыл бұрын

I have no idea what’s going on here but that is amazing

@JDM163TOGLIATTI 3 жыл бұрын

Самое главное что бы это «дружки» из рос нано не увидели

@chuckchuck7062 3 жыл бұрын

Распил знатный выйдет

@floks700 3 жыл бұрын

вам уже мерещится.

@chuckchuck7062 3 жыл бұрын

@@floks700 плавали, видели.

@user-st1cw7yw7r 3 жыл бұрын

Такой движок на подлодку и ядерный реактор не нужен.

@user-kf4ur9po6l 3 жыл бұрын

Я думаю скоро Рогозин презентует обнулëнному новую аналоГовнетную технологию. 🤣

@tootalldan5702 3 жыл бұрын

Nice demo. Plus add a hinge for the wire to the base so you could flip it on. If you put a fan blade on the battery, you might stay cool. Thanks for the technique for adjustments.

@lmwlmw4468 3 жыл бұрын

Very nice idea. A resistor instead of a lead acting as a short circuit, would be awesome in order to get the current down enough to keep the rotation and prevent the over speed that causes the system to crumble down.

@supermagnetecom 3 жыл бұрын

Awesome! Very impressive slow motion scene 😎🧲👌

@h7opolo 3 жыл бұрын

i want you to try this again, but use tape to secure the magnets to the battery and another supportive screw added to the other side of the device to help stabilize it while at high speeds. Awesome! I want to try it myself.

@MagneticGamesIT 3 жыл бұрын

Thanks for the tip :)

@-LightningRod- 3 жыл бұрын

yes no kidding tape, glue, anything, ...use yer braaiaiaiaiaiains !1 heheh

@paulsholar9356 2 жыл бұрын

Remove the battery, retain the horizontal cylinder of magnets and levitation feature, and connect a separate electrical power source (such as output from solar panels) via the needle through the vertical wall. Regardless, to provide long-term operation, must also add adequate heat dissipation feature to the design, consistent with Lenz's Law.

@katieolson1517 3 жыл бұрын

I’m thinking of buying the specs flex, I’m really excited

@Nidhi-wc3oc 3 жыл бұрын

That's so cool and dangerous at the same time

@user-bu7ty3yz8n 3 жыл бұрын

Центровать систему надо. Магниты приклеивать, либо искать ПВХ-трубку подходящего диаметра. Опорных магнитов должно быть на три стороны, а не на две. Вторую полу-ось ставить, если опорных магнитов нет.

@MagneticGamesIT 3 жыл бұрын

Thanks for the tip :)

@FourTreDubbCity 3 жыл бұрын

How is this channel still up!?! The guy literally giving you free energy applications

@MAGnetICus_Attractus 3 жыл бұрын

What is free about it? All those magnets are no where near free. How does the battery get a charge? Not free.

@syedshaarikh3317 3 жыл бұрын

I love that *BEAT* here 2:22 😍

@yonahgreene 3 жыл бұрын

That is so cool just making that thing levitate is crazy

@daanvangeijlswijk7787 3 жыл бұрын

Hi, great experiment! How high up is your rotor? Even without rotating it is quite impressive since it seems to float higher than most experiments using a coilmagnet.

@i-masonicss6721 3 жыл бұрын

That was the most beautiful magnetic thing i have ever seen

@danw1955 3 жыл бұрын

That was trippy! 😁👍

@catherineconspiracy 3 жыл бұрын

its like a brushed motor!

@nathantschetter1264 3 жыл бұрын

That was neat, I think youve overcome the most difficult part, Your a smart man ,youv got this

@ElektrikSMSTEAM 3 жыл бұрын

Чувак определенно не видел как горит закоротивший литиевый аккум...

@vincentgoudreault9662 3 жыл бұрын

Le truc le plus intéressant que j'ai vu cette semaine.

@DamianReloaded 3 жыл бұрын

what happens if you glue/tape them together?

@MagneticGamesIT 3 жыл бұрын

tape? ... good idea ...

@DamianReloaded 3 жыл бұрын

@@MagneticGamesIT Also restrain it on both ends so it can't fall off. Also wear safety glasses just in case the battery explodes or something ^_^

@squeaksallan8195 3 жыл бұрын

you sir have just made may brain light up like an xmas tree.

@-LightningRod- 3 жыл бұрын

cool huh/

@user-wm1zc2df7c 3 жыл бұрын

можно поставить слева тоже стенку для удержания второй половины магнитов на двигателе, тогда риск того, что двигатель распадется намного меньше

@user-eo5sr4rd2z 2 ай бұрын

Here is a question, if you tape the wire onto the battery and let the circuit close, without you holding the wire, would it rotate?

@pufarinu 3 жыл бұрын

you could fix the left end as you did for the right one. you could also use like a protection rubber tube to insert all componens in it

@victorjosepereiralobo9352 3 жыл бұрын

O mundo pagando caro por combustível, idéias simples faz a diferença!🤩🤩👍

@isaacdasilva3136 3 жыл бұрын

Falou tudo meu caro!!

@MagnetBallsandSticks 3 жыл бұрын

秒間、何回転くらいしてるんだろう? 面白い実験😁

@Andrecio64 2 жыл бұрын

It will be cool to put fan blades in the opposite end of the screws to make it a bit more useful and limit it's rotation speed to prevent it to fall down by collapsing

@user-mp7lq3cu9c 3 жыл бұрын

я думал "осколки" полетят мне в лицо прямо через экран

@darkfrei2 3 жыл бұрын

По-моему это так не работает.

@MrDobermanp 3 жыл бұрын

что я постоянно дергаюсь когда падает. нервы не к черту

@PRTTHMCHN 3 жыл бұрын

Есть такое

@Titov_Kirill 3 жыл бұрын

Да эт нормально. Сам пугаюсь))

@AlexPayneKU 3 жыл бұрын

Супер! Спасибо! Очень интересно!

@Shade__Gaming 3 жыл бұрын

Finally legend is back😍

@chingizaktau 3 жыл бұрын

А если сверху также магниты поставить?

@user-wn4mp4dw3d 3 жыл бұрын

Получится тогда генератор!

@user-lr8hd5qi6n 3 жыл бұрын

Нахуа? Сверху нет гравитации

@user-oq8zm1fv3o 3 жыл бұрын

Зато есть инерция

@hl-experiment9829 3 жыл бұрын

These kind of things made me love science

@timetraveler2518 3 жыл бұрын

Thank you for giving me a thought-provoking mind and so, it helps me to fix my time machine to escape by using your magnetic generator. 💥 I will use the magnetic generator through time-travel. 👍🤠👍

@diyathome8631 3 жыл бұрын

Just make sure you use neodymium magnets and wrap them in magnet wire.

@MoinKhan-dn5cb 2 ай бұрын

Is the battery rotating because when Wire is connected across small cells , the battery behaves as a current carrying conductor placed in a magnetic field (due to 4 magnets placed below it), which is the principal of dc motor,???

@user-hm6sp6pq1n 3 жыл бұрын

wow new video very interesting I love your video

@ayannasir3514 3 жыл бұрын

That was awesome bro 👍👍 this look like a magic like in movies

@bhekidlamini1199 3 жыл бұрын

Beautiful I will support it on another end at least it will be more stable 😊👍🏾thanks for the great video though

@MuhammadDaudkhanTV100 3 жыл бұрын

Beautiful experiment

@rubens.4116 2 жыл бұрын

What are the configurations for the rectangle block magnets that repel the ones holding the battery in the air? I tried putting the face that rejects the round sides but they end up changing polarities and want to bring down the magnets with the battery instead when attempting to get them to hover above the rectangle block magnets.

@MagneticGamesIT 2 жыл бұрын

rotor S-N battery N-S base N-S S-N N-S S-N

@rubens.4116 2 жыл бұрын

@@MagneticGamesIT though I can easily sense the battery with magnets floating, the damn thing wants to spin vertically. I would say I have the block magnets spaced as seen and such. I get you need the screw driver and plastic wall to insure it doesn't get attracted fully to one side. But can't get it to not want to turn away where the magnets aren't. What's need to get the same results as seen here?

@HolahkuTaigiTWFormosanDiplomat 3 жыл бұрын

Bigger magnet than the battery on both sides, both side magnets hold a copper wire(since it sticks to the battery) and it will run on its own, the next problem will be controlling (By connecting or disconnect to control the speed? Add a switch between the wire connected to both sides?)

@mattewpichot523 3 жыл бұрын

What if you used a hair thin single copper wire and put loops on each end trial and error till you find the right gauge wire with the right weight to make it spin for a while?

@denisdenisov2968 3 жыл бұрын

Надо перемотать скотчем батарею и магниты, поставить упор для хорошей устойчивости.

@mlhailluney8464 3 жыл бұрын

Пластиковая трубка

@15seceargasm 3 жыл бұрын

Yo! Mr. Magneto Now that's an interesting upload Thank you ,,🤩

@thebatman911 3 жыл бұрын

One day, we'll all be sitting on magnets

@yashagrawal8650 3 жыл бұрын

Hey, Try to run it in vacuum, would be fun to see how long it takes to stops once started.

@davidhansen4471 3 жыл бұрын

that is one of the most fasenating things i have ever seen thank you

@user-eb1et8oz6s 3 жыл бұрын

Вместо самореза надо было сверло поставить, вдруг бы что полезное получилось?! 🧐)))

@user-or7is1tl3p 3 жыл бұрын

Полезное бывает и вдруг И сверло бы вырезало: Или дырочку или круг

@user-ey6nr7vl1t 3 жыл бұрын

@@user-or7is1tl3p или глаз автора с такой техникой безопасности)))))))))))))))))))

@user-cu8gt5fs3k 3 жыл бұрын

Если к данному вопросу подойти основательно . Можно сделать , к примеру вентилятор .

@wateryagarvideos5186 3 жыл бұрын

This is why I love magnets

@Felina-Felice 3 жыл бұрын

Amazing!!

@fbi397 3 жыл бұрын

How much you wanna bet this is gonna become the hyperdrive in the future but a more advanced version

@wyatt1682 3 жыл бұрын

Funny you'd say that FBI almost like youd.. know?

@michaelmoskal4971 3 жыл бұрын

Please do more types of videos like this.

@mikejaysonsaba8634 3 жыл бұрын

This could save LIVES....

@andrewjohnson7946 3 жыл бұрын

With this information being available I recommend anyone watching this to download it and memorize it.

@adrianvrouwenvelder6919 3 жыл бұрын

What - specifically - generates the torque?

@GeoRaphaelMichael 3 жыл бұрын

Mind blowing!

@-LightningRod- 3 жыл бұрын

pretty cool

@rafaelmera3865 3 жыл бұрын

Really nice, I am from Ecuador

@BoredOfBills 2 жыл бұрын

Non scientist here - suppose this were precision engineered with all tolerances precisely calculated. Would it be possible to attach a dynamo and create more electric power than is held in the Duracell battery? Or would that violate some law of physics / perpetual motion?

@MagneticGamesIT 2 жыл бұрын

unfortunately not, you will get less and less energy than consumed

@BoredOfBills 2 жыл бұрын

@@MagneticGamesIT Thanks. Your video inspired me to watch many other magnet related vids on KZfaq and to do some "real" research. What I have concluded is that hiding in those magnets are the first steps towards Star Trek ! Some exotic minerals, a few groovy magnets and some imagination and WARP DRIVE is on the cards !!!

@Andrey-cv9ht 3 жыл бұрын

Я уже представил как это крутит маховик...

@user-or7is1tl3p 3 жыл бұрын

Нужно не представлять а воображать И воображение будет маховик вращать

@antonzhdanov9653 3 жыл бұрын

Энергия всё равно расходуется на то, чтобы побороть продольное ускорение магнитной пушки. А вообще левитирующие магнитные подшипники давно не новость.

@TheAxeljones2012 3 жыл бұрын

Congratulations!!

@ZCoupe 2 жыл бұрын

пиздос за какие то фокусы с магнитиками из школьной программы, больше миллиона просмотров! Можно мне тоже так?

@Crazy_Milk121 2 жыл бұрын

Такие электрогенираторы использовались в СССР , покрайней мере я так понял новость о взрыве на электростанции когда современые горе инженеры пытались починить генератор , они услышали что что то стучит , разобрали а там был вал который крутился в магнитном поле , и как вы думаете что они сделали ? Эти дебилы его приварили , в результате произошол огромный взрыв помоему это произошло на ГЭС , у Делягина на канале об этом слышал он рассказывал , но не упомянул где именно , поэтому я и подумал что на ГЭС помните там рвануло несколько лет назад .

@PYTHAGORAS101 3 жыл бұрын

What if you glued the magnets to the battery? Also the magnets may need slightly better alignment to prevent wobble.

@sp1der7258 3 жыл бұрын

the magnet crashing into the glass brings me jumpscare idk whyyyyy

@MassMultiplayer 3 жыл бұрын

survival mechanism, you fear sudent noise in jungle, if its a soft noise you are worried and scared , if its a sudent sharp noise you dont take time to be scare and worried you react and save your life from predator or accident, falling branch roch, tunder. survival mechanism very simple. if a car sudently horn you you jump and save your life. Reflex be happy to have it

@sp1der7258 3 жыл бұрын

yes i will be proud as a human