2024 KTM 300XC-W | TSP Head and ECU Tune | Install and First Thoughts

2024 KTM 300XC-W | TSP Head and ECU Tune | Install and First Thoughts | Highland Cycles

Рет қаралды 9,906

9 ай бұрын

Installing the ‪@TwoStrokePerformance‬ High Compression Head and ECU tune on a 2024 KTM 300XC-W.
Support us at Rocky Mountain ATV/MC bit.ly/3qiJO3h
Want to buy me a coffee www.buymeacoffee.com/highland...
Need Some Gear For You and Your Bike?
1sttrackmoto.com/highlandscyc...
Need some tires?
veemototires.com/ Use code “highland”
Need a Gripper Chin Mount?
www.dango-design.com/?sld=mor...
Need a Permanent chin mount?
chinmounts.com/?ref=HIGHLANDC...
If you want to support this channel on Patreon, here is our page:
/ highlandcycles
If you like to shop on Amazon and you want to help us out, use this link www.amazon.com/shop/highlandc...
And then shop for whatever you want. It really helps us out a ton and we appreciate it very much
Want some Merch? amzn.to/3Wi6ri0
bit.ly/39rkdXm
Check out our social media too:
Facebook : / highlandcycles
Instagram : / highlandcycles
TikTok: @highlandcycles
Now…. Go Ride Your DIRTBIKES!!!
#gospeloftwowheels #dirtbikes #highlandcycles
Please support our sponsors
www.tbtracing.com/
xcgear.com/mako-360/
innteck-usa.com/
nitromousse.com/
www.systemtechracing.com/
ddcracing.net/
enduroeng.com/
bulletproofdesigns.com/
www.mrwolf.bike/
www.wlfenduro.com/
www.dalsoggiorace.com/

Пікірлер: 87

@Mac_Simiser 9 ай бұрын

Man... i stepped away for maybe 2 years and holy cow....25k? I remember when you shaved your head for what? 2500-3000??? Pumped for you Morgan. Great channel, free info and entertainment. Glad to know you are still using the bleed cup Aoki mentioned.

@highlandcycles 9 ай бұрын

Its the best!!

@stevedouglas1654 9 ай бұрын

@@highlandcyclesyou should be at 100K by now. Love yer channel 👍

@dougiep8464 9 ай бұрын

Great timing, installing mine today

@Josh-Silvia 9 ай бұрын

“It’s just cool looking, let’s be honest” truer words never spoken!

@highlandcycles 9 ай бұрын

Yep

@jeffreyharrison5637 6 ай бұрын

Love your videos and the Husaberg in the background!

@floza112 9 ай бұрын

I notice in TSPs power kits, they include a bpr8eix, as it's the sweet spot for performance etc, so I thought I'd try it, stock br7es to bpr8es, ran a little better, improved throttle response down low, from chats from NGK going from a non, to a projected tip is equivalent to adding 1-2 degrees of timing, maybe what the exc/xcw needs!. So went the TSP medium head, which is similar to stock compression here in Oz, so much improvement. Can't wait for tune.

@highlandcycles 9 ай бұрын

It’s so good.

@stevedouglas1654 9 ай бұрын

I’m already gonna get this for my next bike a 2024 Husky TX300. All the reviews on KZfaq says it’s awesome ! 👍

@highlandcycles 9 ай бұрын

The best

@middleageddirtscooter7883 9 ай бұрын

I have the medium comp head and ERM on my 21 te330i. Love it!! I didnt get orings or crush washers with my kit.

@davidanderson2393 9 ай бұрын

Always striving to make a new bike better, times have really changed, we used to get a new bike and just ride the wheels off stock. My wife always tells me, why do you buy a new bike, bring it home and take it apart and spend a couple weeks changing everything before you even ride it.

@highlandcycles 9 ай бұрын

Hahahaha

@zachfarkash6430 9 ай бұрын

Good stuff Morgan glad to see That you're getting the work on that 24XCW?

@d.brayman3165 9 ай бұрын

Cool stuff!!! Looking forward to trail testing. It may be that time...hmm. I don't know. A dirt bike without a kicker, wouldn't feel right.

@highlandcycles 9 ай бұрын

I hear ya. It’s a weird feeling

@jakegarner7 9 ай бұрын

Can't wait to see what the ECU does to this machine.

@Billy-burner 9 ай бұрын

The ECU helps the bike run

@williamcrotts7054 9 ай бұрын

Can't wait to see how it runs with a spark arrestor .

@Chromedome053 9 ай бұрын

I was not sold on the radiator cap at first either and I’m a 28 year auto tech. Use your left palm, push, and spin. Way easier. Haven’t messed with my idle yet as cold idle then riding it seems to have it working well for now. Would like to see what you’re doing for idle adjustment compared to what they say with a scan tool.

@highlandcycles 9 ай бұрын

I have a plan for a video

@Noone-dy7sh 9 ай бұрын

Those are $$$$$

@darrellyazzie7664 9 ай бұрын

Oh yea

@booger65man 9 ай бұрын

Oh boy! Before I came across you I bought the Slavens mule high comp head for my 24 XC 300 and switched to the 7 heat range plug. I haven't had any problems knock on wood but I don't like hearing there is a possibility. I need a head for my 23 XC 250 and will be calling tomorrow to get that and some other stuff ordered. I am curious why it does not seem anyone recommends to highest compression head? I am riding at 6500 feet all the way up to 12k. In my sleds I ran a lot of compression with a little race gas and loved the responsiveness. Will catch up tomorrow and hopefully get everything figured out.

@highlandcycles 9 ай бұрын

I run the highest comp head on my XC. It’s great up here.

@offroadtrailrider77 8 ай бұрын

Picked up a 24 300 xcw to use for riding in TX, AR, and CO. Mainly use it for easy trail riding and connecting trails for day long rides. No racing. What head is recommended? Medium or High? Downsizing from a 690 for super light weight dual sport riding. Mainly to connect dirt trails in CO and Arkansas Ozarks.

@highlandcycles 8 ай бұрын

I would do the medium

@palcolandcattle4259 9 ай бұрын

Have you checked the base setting on the throttle position sensor on any of your tbi bikes? I finally did mine after its been spooging and running rich even after the tsp tune. It runs great now! My base setting whith both idle screws backed off was .426 volts and it should be .400 volts. I just used my Fluke multimeter rather than the special tool and it worked fine. Im thinking this would make a great video.

@highlandcycles 9 ай бұрын

I need to do that. What wires do you probe for voltage?

@Rickshaw199 9 ай бұрын

Just picked up my 2024 300 XCW, any info on what wires to check would be very appreciated!! I feel like mine is running a touch rich of idle as well

@onthethrottle7104 9 ай бұрын

@@highlandcycles One tap goes to the yellow wire and one to the black wire located behind the TPS protector cap... You can use a paper clip as the tap, stick one clip down into where the yellow wire is and one clip into where the black wire is and then connect your meter leads to one clip each. Rotate the position on the TB until you reach your desired number you're looking for..

@nickstevens7369 Ай бұрын

As a carpenter, love the 25 heavy! What could I expect from putting this head on a 14’ te 300? Worth it?

@highlandcycles Ай бұрын

I think so. The bump in compression and better head profile will really help with power delivery. I find that it lets me run a gear higher everywhere which helps me keep the bike settled and suspension working better

@darinvanderpol3351 9 ай бұрын

Just some info I was looking for. Thanks Morgan. Did that one run really rich compared to the XC? Mine is really rich and loads up in the tight woods. Don't have that problem with my '23 XC. I'm also planning on going with TSP power kit. Had it in my TPI and it was really good.

@highlandcycles 9 ай бұрын

Yes it was way rich. This fixes it! So good

@darinvanderpol3351 9 ай бұрын

@@highlandcycles Awesome! Can't wait for the ride video!

@BraaapoholicBob 5 күн бұрын

Morgan I have a new '240 300 XC-W and I think I'm going to pull the trigger on the same TSP setup. I ride at about 3,000-5,000 feet in the high desert area in SoCal. I'm about 245lbs with gear and came off a 300 XC. My question is medium VS high compression head? If I go high compression (I'm leaning that way due to my weight and riding style) can I run our weak-ass 91 octane Cali gas with out any issues? I absolutely do not want to hassle with race gas!

@highlandcycles 5 күн бұрын

Yes. You can run 91 with the high comp no problem

@gareththornton3917 6 ай бұрын

Will a tsp head and ecu flash on a gas gas 300 bring u any closer to a 4 stroke. In terms of easier riding great video

@highlandcycles 6 ай бұрын

It will definitely make it easier to ride

@easterntownshipsenduro 9 ай бұрын

👍🏼🤘🏼🤘🏼

@ianshewmaker8439 9 ай бұрын

Just wondering now that you’ve ridden 300’s with the TSP head and RK Tek heads, which one do you prefer and can you tell different performance characteristics between the two. I currently have the RK on my 2019 300xc and wondering if the TSP head would be worth a try. Thanks

@highlandcycles 9 ай бұрын

For my normal and favorite riding I like the TSP better on the TBI bike. I ran an RK TEK on it and on my 2018 and they are really good but the TSP is just easier to ride while still having lots of power. The RK is just explosive. Which is fun but a handful in the hard stuff.

@richardhartley7094 9 ай бұрын

👍👍

@highlandcycles 9 ай бұрын

👍🏻

@andrewhaines5701 7 ай бұрын

What kind of replacement spark plug do you recommend. I think you said it in one of your videos but I can’t find it.

@highlandcycles 7 ай бұрын

NGK BR7EIX

@Togged 9 ай бұрын

Your thoughts on the TSP vs RK TEK head?

@highlandcycles 9 ай бұрын

The RK makes more explosive power and the TSP is more linear. I also like the tune from TSP. It really cleans the TBI bikes up

@shawnh2590 5 ай бұрын

So stupid question. But do you have to pull the gas tank on the 2024 te300/xcw300 in order to change the spark plug?

@highlandcycles 5 ай бұрын

Yes. I know a guy who built some crazy wrench but yes

@shawnh2590 5 ай бұрын

Oh good I mean that makes perfect sense. SMH specially, for an Enduro motorcycle that may need to be repaired on the side of the trail with limited tools.

@EnduroTrails71 8 ай бұрын

Having trouble finding the link to purchase. What does that TSP head and ECU tune cost? Thanks

@highlandcycles 8 ай бұрын

sbmotoperformance.com/

@user-bx3hc6vc9i 7 ай бұрын

What gearing ratio are you running on the new MY24 KTM 300 TBI

@highlandcycles 7 ай бұрын

Currently stock. 13/45

@JohnSmith-fd6nd 9 ай бұрын

What Slavens head failed miserably? The S3 head has worked well for me.

@highlandcycles 9 ай бұрын

Wasn’t the S3’s. Those are good.

@Andre-oj3dd 9 ай бұрын

😀

@al-ew3mj 6 ай бұрын

have you herd anything about the 300 pistons hitting the crank

@highlandcycles 6 ай бұрын

@al-ew3mj 6 ай бұрын

@@highlandcycles kzfaq.info/get/bejne/h86Yg6l8ybXJcas.htmlsi=OYCn6D_Y2sYtgU8k, not sure bout this whats your thoughts,thx al

@tylerhall3854 9 ай бұрын

So mine has 50 hours on it, i got a rktek insert which was a huge disappointment. I honestly cant feel any difference. When i pulled the oem head there was a big chunk of buildup on the plug. Thinking seriously bout sending rktek back, i assume running tsp's high comp u have to run big gas? Im between 1000-3000ft above, i really dont wanna have to run race fuel. Mine is extremely fat on bottom as well, when riding alot of tight/technical its actually difficult to keep it clean an crisp. Smokes like crazy in these scenarios

@highlandcycles 9 ай бұрын

I don’t have to run anything but pump gas up here. I live at 6000 ft. I would get the tsp setup

@billypulsipher1544 9 ай бұрын

measure your oil when you change it, that sounds like a crank seal.

@philipsmith6152 9 ай бұрын

Great video, Slaves sells his own head "the slavens mule head" which he says is far superior to anything on the market 🤣

@highlandcycles 9 ай бұрын

Hahahaha, not for long now. I am glad that he will be selling this because I really do think its the best!

@philipsmith6152 9 ай бұрын

Agreed, I had one on the 300 👌@@highlandcycles

@ronhartle3268 9 ай бұрын

Is that a a Husabrg in the back?

@highlandcycles 9 ай бұрын

Yep

@themodifiedlife2774 5 ай бұрын

Do u just run this with a stock piston?

@highlandcycles 5 ай бұрын

Yes

@Dissentient01 9 ай бұрын

People always crack me up changing stuff on their bikes, when they know they can't ride that good anyhow.

@highlandcycles 9 ай бұрын

Agree. But this is like getting the jetting right on a carb bike. It’s not some darker that doesn’t do anything. It’s just that with FI we can’t all just tune like the old days.

@Dissentient01 9 ай бұрын

@@highlandcycles I hear that for sure. Hope it rips!