So many dislikes... do people want some pepper with that salt?

One question. Do you know if you can set the built in card reader to arm/disarm only certain areas? I didn't find this option in settings.

Hi Dave. Another great video many thanks. One question. If installing this as an end user do we need a hik pro account? Is it possible to set up and config without?

Great review dave thank you verry mutch i am going to buy this alarm system for my house with 4 zones(area's?), Garage, Home downstairs, guest living part and garden shed. One question how do you switch on/off the different zones/area's from the keypanels? So if i am at home the alarm is still on for the garage and the shed . How do you put on/off the diverent zones/area's from the diverent keypanels? or if you leaving the house how to switch on all the zones/area's at onces of seperated? Does these scenario's work this way from the keypanels? And second question are there plans to sell keypanel with integrated, build in tag reader? because i have 5 enterances and now i have to put 5 keypanels and 5 tag readers. That doesn't looks nice (my wife opinion)

Hi DVSLTD, I’ve watched the whole video. Thanks for making clear a lot of things!! Quick question, my girlfriend and I both have to work different shifts. Is there a way i can set a tag to disarm the alarm for 5 or 10 minutes? Or with a code on the keypad? So i can get in and switch off for 10 minutes and it switches automatically back on? Keep up the good work 👍🏽

Can you arm the external sensors separately to the internal sensors? When I'm home at night I want to move around freely inside the house but arm the external sensors. When I leave the house I want everything armed.

This is more helpful than Hikvision's own videos 👍

Great video, thank you. Couple of questions, can you disable hub sound notifications all together? As I’m planning to hide the hub and also can you swipe the key fob on the keypad to enable/disable the alarm?

Hi Dave what is the signal strength of the intruder alarm- as I was looking at installing it in a large property - storing the hub in the loft in a cupboard cat5e linked to the router thanks

Great video, thnx. I installed 3 axpro systems last month, two of them giving an RF malfunction. The systems works fine, and I didn't see any issues in working. But this RF malfunction stays in the application, also on the panel the malfunction light is on. Do you know anything how to solve this? Or what's the cause of it?

Great videos. Keep up good work

Is this solution from Hikvision the type "buy, install and forget" or is there any subscription for the hikvision cloud and app service? Asking as private individual user. As I am looking into Pyronix enforcer and Hikvision AX and AX is tempting me with the photo verification after the PIR triggering. Is there going to be a smoke sensor added in future. Can you connect via the app to the PIR sensors with build in camera for a live view? Thanks in advance

hello, thanks for your channel! I have a question, can you tell me how to receive the images to the app? can you tell me how to configure that? The images do not receive him, but the alarm jump does. Thank you

Can and if how do you set up a part set? Ie Full; set 3 downstairs pir's and 2 door contacts Then one pir on landing so its off at night

Hi mate, thanks for another cracking review. I currently have an ADT system that I'm looking to replace with this or Pyronix. Any steer on the difference between this and the Pyronix Enforcer system?

Hi! Can I deploy the alarm without the Keypad while relying on the app and keyfob for arming and disarming? Also, can I use one panel for multiple houses as long as they within the ranges of the detectors? Am I able to partition this alarm as I would a wired alarm? Can I also assign the different areas to notify the relevant users upon alarm activation? Thanks.

Hi, about the camera does it detect human or cars,bikes only or does it detect also insects ?? Because i hate getting notifications of insects...

So it is the Hub that act as a sirene? The kits do not include a sirene by default and seems a bit of a miss.

looks a very interesting product, I can't understand how it is positioned against AX Hub!

Great review, thanks. Any idea of the practical range? Need to get to some out buildings about 25m away through some thickish walls.

Thanks Dave, Another Great Video, very informative. I am looking forward to this model arriving in Australia, at the moment we only have access to the Axiom Hub, still a great panel but no PIR Cams. Those PIR cams look a lot like Risco's, maybe Pyronix made them as well ? Hopefully there will be a firmware upgrade for the keyfob buttons to be able to operate an output on the wireless output expander to open a gate and garage door! Big difference in the the speed of connection for the Hikvision panel compared to Bosch and Risco, about 10 times faster, which is great. Thanks again, looking forward to the next one.

Good day After firmware update can't see the configuration menu you speak of. How can I ad detector devices? Thanks in advance

do i need 3g or 4g to arm and disarm the alarm with the keypad?

Could you add better hikvision cameras like the 8mp colorvu to the ax pro so if some was to jump over your back gate etc it would alarm?

Thnx for this review. I already installed the Hikvision camera's. Next is an alarm. Maybe this will be my next project. Still don't know what you mean by arc but will look into it when I'm ready to start with the project.

Great stuff mate, thanks

hi, thanks for the video. Does it have a backup battery?

Hi, Could you please tell me roughly how much data would this use for 4g Sim card? Wanting 4 x Detectors with cameras on them. I know its depending how much it gets used but just rough estimate. Leaving the house for 6 months & trying to work out what data plan i need. Thanks for the great video

Great review thanks for your chanel ..How can we armed or disarmed the device by calling or messages sms .

Hi, have you installed a repeater ? the DS-PR1-WE? if yes how can you add devices to the repeater?

Hello can you do a demo of the ax pro bell box different siren sounds panic intrusion and fire

My alarm sent every message 2 times, AND over network AND over 4g... I want the ax pro only use 4g when there is no netwerk. How can i configure that? Can you please help?

Hi, do you know how to add the AX Pro to the I series NVR IoT ? thanks!

Can I link the alarm to my existing live guard cameras, so if the alarm is triggered, instead of an external bell box, my camera alarm would sound (and lights flash)?

Perhaps a follow-up using the DS-KH9310-WTE1 and how it integrates the CCTV/NVR, Alarm and Access Control?

With the relay module, is the system able to unlock a door when the wireless mifare reader is swiped? i.e. basic access control.

thanks mate

Im guessing lid status means the tamper?

When will this be available for purchase?

Great video. I'd like to ask how to clear that fault ? I have the same, set it up in one place, then brought to another and its on now. Cant find any fault notification on app too. Does anyone know please.

can i saw how many person is connected my my ipcam ? or how many ip's is connected to the cam ?

Do you know if its possible to use multiple AX Pro Systems in the Hik- Connect App?

my pirs are scanning too close to the ceiling, can i change that in the settings?

Looks like a really good system how can i get the price please?

I’m in the US. Can I buy this from the UK? I need it!!!!!!

Hi Is it compatible with pyronix wireless range of detectors?

i want to place the pirs of hikvision in de corner of the rooms, what accesiorie do i need?? Please can you help me?

Où trouver le code de vérification d’un système d'alarme Hikvision AX PRO ?

thanks dave, how many codes i can program for individual people on the keypad. cheers khal

When I try to pair the PIR sensor using the HikConnect app with the AX Pro, the LED only flashes orange and does not pair.

Why so many bad reviews about this product on the Internet?

Can we add 8plus hikvision cams

Cheers Hikvision, another step towards killing off the intruder alarm industry for us professionals

Can i get photo on demand from cam sensor?

Please help mine say Lid is open

Is it good as Ajax or better

how can i activate the wifi mode

By the way, I can't configure to receive push notifications by email either, to my hotmail account. but I have left that as impossible…no one is correct in the indications.

The external bell is way too small, also - no screen print? Sounds more like a DIY system to me, such as Yale, not a proper kit for installers

Is pyronix a hikvision alarm system too?

how to unbind device?

Cracking bit of kit

This looks to be the dogs B word. Will be buying. Bye bye old school alarm installer.

The question is, what about Pyronix enforcer ,how compare them two alarms. Why Hikvision made wireless alarm if they have already one in offer, in fact Pyronix has but is it Hikvision and Pyronix still fusions company?

this alarm is better than the axiom? axiom seem to be more professional......

I've spent 3 hours last week trying to get my software to work properly and still not able to get anyone that knows anything. Is it happen because of the Covid-19 situation? Or Is it always like this?

Is this a copy of Ajax?

Great video, thanks. But It`s sounds like Ajax ...

HIKVision appears to have a confusing strategy - they have Pyronix, work on that! Launching another system aimed at whom? The DIY type? It just doesn't add up. About as useful as a third leg.

It was a big mistake to buy their system. I forgot my password... submitted numerous requests but is useless. No customer service.

Algorithm.

ajax systems is much more better than hikvision version

plagiarism of another good product

1/10. Big scam. Had to ask for the refund. Never again.

It's just a сhinese fake