Hikvision NVR Setup with PoE Switch

Рет қаралды 36,057

Best Security Devices

10 ай бұрын

In this video, I show how to setup a Hikvision NVR with an IP camera connected to a PoE switch.

Пікірлер: 34

@virt23virt Ай бұрын

even if i am using hikvision for 7 years now, never had a setup with nvr without poe ports, but today I had to set up one with poe switch, and I found this video confirming my theory about the architecture. thank you

@user-fk1yn1eg6m 7 ай бұрын

This really helps, thanks much.

@Halsalloum 6 ай бұрын

Thank you for the explanation

@gerc95 7 ай бұрын

Really helpful tutorial

@Haribel 8 ай бұрын

Thanks for this video. ❤

@moseskilonzo948 3 ай бұрын

Thank you.. really helpful

@banthomas7926 5 ай бұрын

thk a lots for sharing,may l asking how to decide a site wanna use poe nvr/non poe nvr+poe switch.

@mohammedsaleh6114 4 ай бұрын

Thanks so much❤❤❤

@jonathandavinji 8 ай бұрын

Good good good this is one of the best video.kindly if you are having for the door access control system ,may i have link.

@uthatoesak6847 9 ай бұрын

thz billion 😍

@marceloaguilera9285 4 ай бұрын

Thanks for the video! Question. Can I expand the number of cameras on a 4-channel Hikvision NVR by connecting 4 extra cameras using a PoE switch?

@bestsecuritydevices 4 ай бұрын

No, a 4-channel NVR is limited to manage and record 4 cameras no matter what you do.

@ccip1799 27 күн бұрын

Thank you

@jorisr4644 5 ай бұрын

Thanks for the great video. I have a question though. In SADP I see the camera online with an IP in a different range (as you stated). I add the IP in the correct range, but when I ping the camera I get a constant timeout. It is an older camera (DS-2CD2332-I), could it be a problem with the camera hardware?

@bestsecuritydevices 5 ай бұрын

I could be your Windows firewall blocking pings, I've seen that before. Make sure you have the camera and PC using the same IP range. e.g. PC: 192.168.0.1 Mask 255.255.255.0 and CAM: 192.168.0.2 Mask 255.255.255.0 and them disable the Windows firewall for a while before trying pinging the camera. You can also open a web browser and type the camera's IP to check if you get access to it.

@DriesCauwelier 4 ай бұрын

Thanks for the heads up! How to make that specific camera then recording to the nvr? Does it do that automatically once it is connected in the NVR settings? I have a similar setup. No camera is directly connected to the NVR. But none of the cameras are recording on the NVR... Can you help? thx!

@bestsecuritydevices 4 ай бұрын

You need.to configure he NVR to start recording continuoulsy or by event (motion detection for example). Enable motion detection on the cameras and the recording on the NVR.

@ivanclaros7878 4 ай бұрын

Very usefull. One question. Can I use a different brand POE switch with my hikvision ip cameras. The guy at the shop told me is not a good idea. But, I see you are using a NETGEAR Switch and a hikvision ip camera. Tell me please.

@bestsecuritydevices 4 ай бұрын

PoE and PoE+ are universal Standards, of course you can use a different switch, they were not invented my Hikvision and there are still better brands out there manufacturing switches that meet the standards.

@OburakCharles 2 ай бұрын

Good lesson

@bestsecuritydevices 2 ай бұрын

Thanks, I'm glad you liked it.

@user-np4ts1gq7r 8 ай бұрын

What is the benefit of connecting the camera directly to the switch or directly to a router v.s. the POE switch on the NVR? I am not understanding this.

@mojo3717 7 ай бұрын

If you connect to your router, you will have the option to also manage the camera / nvr from your laptop or pc. If you connect the camera to the NVR, it will only allow you to manage it from the NVR interface. Also, some Hikvision devices cannot be connected to the NVR directly and must be setup from your home network / pc.

@toutou7946 10 ай бұрын

Thanks. .so how many camera can we see in this nvr via poe switch

@bestsecuritydevices 10 ай бұрын

4 cameras because that's the NVR interface limitation (It can display only 4 cameras).

@toutou7946 10 ай бұрын

@@bestsecuritydevices thank you too much good continuation

@jonesgotlop 9 ай бұрын

Loving your videos. Learning a lot every time I watched them. Please help on viewing multiple dvr's to one monitor. They are in different block of buildings but same network.

@boyachi002 2 ай бұрын

Hi Thank you video ,I've question Can I add TPLink to this nvr , I'm interested envr form Hikvision to much.

@bestsecuritydevices 2 ай бұрын

You can use any switch you want, it's just a question of brand and features available.

@cihadkap92 3 ай бұрын

what is the benefit of using a Poe Switch instead of using everything on the NVR?

@bestsecuritydevices 3 ай бұрын

You can connect the cameras to an existing switch which already have other devices such as computers in a school or something like that. It’s also possible to better distribute the cameras since you can have 100m from the NVR to the switch and another 100m from the switch to the camera (total 200m).