Thanks!

Do you have any idea, how to just capture the centerview without the MFDs, if they're on the outside monitors? My KZfaq-Videos are not in Fullscreen, because the MFDs are beside the centerview.

I'm not having that same success. It's been a headache getting my 3 monitors up running. ugh

Any ideas how you fix the 'broken' horizon? Also, in the cockpit if you zoom out you end up with your wings pointing forwards...

What monitor can I buy that's very big and cheap in the uk? What graphics card is best but not too expensive?

I wonder what a 49" ultra wide curve monitor would look like in DCS ? 🤔

Hi I have latest beta 2.9 when I use 3 screens at 12800 x 2160 its amazing but, when I use mission editor or in game map f10 button I only see half the map and its non click able. I have 3 55" uhd and a signal 4th screen from the Sony reciever. Need map to work?

What about a quad screen setup?

Hello, thank you for the tips. I have a bezel distortion meaning that DCS do not take into account that I have 3 screens with bezel , Is there a way to specify somewhere the bezel size like we can do in many driving simulation. Do you also have a screen mismatch due to the bezel ? NVIDIA Surround is also able to change the resolution for adapting the bezel but I don't want to use it anymore. THK for your help.

This only works if I have fullscreen unchecked. A bit stumped at this point. Help would be appreciated 🙏

Hey can i put the map on second monitor?

I have mfds with screens I just picked up. I connect via HDMI so it looks like I have one screen and the mfds look same. How can I start to put my mfds on the rite screen?

Good Day, I downloaded DCS 2.8 yesterday and while looking for instructions for setting up Multi Monitors I discovered your video, thanks for that by the way. I think I must have done something wrong however. I disabled Nivida surround and proceeded to follow your instructions. I set my left most of 3 monitors to main, set to 3 monitors in DCS and set resolution to 5760 x 1080. I am running 3- 27" monitors. The problem now is the only view that I have is about 1/3 of the left monitor being displayed in the center of the screen, and it does not display the whole image so that I cannot even get to some of the options available. I have a pic of the screen, but I don't see any way to attach it here. I have deleted DCS and re-downloaded in hopes that it would provide a fresh install so that I could start over, but the problem is still there. this leads me to believe that is a Windows issue, but I am not sure what I did to cause the issue. Hoping your expertise may be helpful. Thanks Kevin

Would this resolution work for 3 48” displays?

BIG NOTE HERE: Make sure you click the 5760x1080 option... not the size for just one monitor. (In other flight sims, say like XP11/FSX/etc, you select the resolution of EACH monitor. UNFORTUNATELY, I did this, and now I am stuck with a display where the 1/3 of each side is black and I can't click on anything...) It appears the only option is an uninstall/reinstall. Again, unfortunately this is painstakingly slow as I am only on a 400 MBS/FIOS line - the first install took 4 hours . UGH... So far this sim is an infinite pain in my kulo. I was expecting a sim with the ability to adjust more settings/and ya know... MAKE IT WORK? UPDATE: Uninstalled, and reinstalled. Same problem. If you miss this setting, ANY future addition of DCS will not run. I am basically in DCS jail and can never play DCS because of ONE setting. ANY idea on how to get it to work is appreciated. I think the only way I can get it to work is to buy a new computer now... my computer is fine, it's the game that doesn't work... this is so backwards.

Man for what ever reason, Im only getting the screen to show up on the right 2 monitors (center and right) but no the left. so it looks like its been cut off. left screen is main display, settings are the same as you have it. 3x 32" monitors. I cant figure out what happened. any idea? :)

Thanks now I cant play dcs anymore because this broke my game

How do you have service cars near plane?

Many videos reference Surround as if it does not work. Why could this not be done using with surround?

Hi I got a problem I set up my DCS for 3 monitors but noticed I got not the right connection cable for my third one and now I cant enter the DCS settings anymore. Is there some kind if hotkey or sth?

What graphics card

Do you have any experience with touch screen monitor setups or could you point me in the right direction for information please?

Just a tip for people with NVIDIA cards, you may need to enable/configure your trips in the NVIDIA control panel first, get there by right clicking on PC screen and opening the NVIDIA control panel, then look at the 3d settings "Configure Surround,Physx", and go into configure button to set the monitors. I won't go into all that, plenty of other places to find that. Just saying, I have to do this on my PC, and I THINK it's pretty much mandatory to use NVIDIA trips in games. I also use trips for I-racing. And since I only use the trips for gaming, I switch back and forth a lot so I have to do this every time I game with trips. Only takes about 30 seconds. Cheers.

I cant get mine to work

So is this the resolution for any 3 screens or just the 27" monitors you are using? What would the resolution need to be for 3 AORUS FO48U each monitor is 3840x2160 120 Hz?