HITACHI EX1800 Excavator starting new bench
Рет қаралды 40,409
5 жыл бұрынHitachi EX1800 mining excavator loading CATERPILLAR 777 trucks starting new bench so it can then get trucks down and begin production loading. Listen to how hard this rock is, it sounds like glass shattering as he is digging!
@scruffy6151 5 жыл бұрын
Thank you. Just a wi bit of hard face on that bucket. Nice to see a video from you.
@mpsimonful 5 жыл бұрын
belle vidéo ! merci.
@ConstructionMachinesChannel 5 жыл бұрын
Awesome power. Super video 👍
@dougsmith1166 5 жыл бұрын
That’s one tuff machine
@johnnymurff4137 3 жыл бұрын
Awesome footage and yes it does sound like glass. What kind of material is and what will it be crushed and then turned into gravel or aggregate or road base material?? Like to see blasted rock or stone being loaded and handled!!
@MrWhiseguyy 5 жыл бұрын
Great!!
@phillipbonner5215 5 жыл бұрын
That's a big excavator
@DirkCannon 4 жыл бұрын
I think this is vulcan look how dark that rock is
@strangefruit8776 5 жыл бұрын
Why take such deep cuts? I’ve seen a lot of guys do it that way but never really understood it because of the loss of cycle time and the safety factor of working next to such a drop off.
@briangardiner1015 5 жыл бұрын
that is how they do it is in benches. What makes the cycle times longer is dumping behind himself. In the description it says they are starting a bench. I think once there is room the trucks will be on the floor of the cut and the cycle times will decrease. If a bench is left not being mined according to OSHA Regs there has to be a berm protecting someone from driving off the edge. I think the berm needs to be 4ft high.
@TheRancher250 5 жыл бұрын
Brian Gardiner OSHA has no authority on a mine site it falls under MSHA regulations. Yes any place there is a potential for a roll over it must be bermed, however there is no set height in ft., it is mid-axle of the largest piece of equipment working in the area.
@DirkCannon 4 жыл бұрын
@@TheRancher250 took the words out of my mouth
@michaelwalker4456 5 жыл бұрын
Is that at Vulcan?
@user-th7yo7kk6v 4 жыл бұрын
Chchfhchfuㄴㄷ 잘
@user-th7yo7kk6v 4 жыл бұрын
쓰레기 라는 말은 곧 다른 사람의
@LYEARTHMOVERS 5 жыл бұрын
Awesome!!!
@robertjackson98 5 жыл бұрын
great video
@rickysdiecastmodels3067 5 жыл бұрын
Nice one👍
@thunderstormzlightning 5 жыл бұрын
Awesome
@canvids1 5 жыл бұрын
that is some heavy lift. I used to operate a gantry crane that would lift 40 ton. Anyone know how many ton this machine is lifting?
@TheDennisZb 5 жыл бұрын
Specs say max lifting force 60 ton...
@samk4369 3 жыл бұрын
About 20-30 tonne
@DirkCannon 4 жыл бұрын
Is that Vulcan materials in corona?
@donkuhner5541 5 жыл бұрын
Where is this ?
@UrsulavonB 5 жыл бұрын
S. Calif
@hecburndyer3074 6 ай бұрын
This is a great piece of machine
Cool Items Official
Рет қаралды 56 МЛН
Construction Machines Channel
Рет қаралды 65 М.
Benjamin Beytekin - Construction Machinery & More
Рет қаралды 7 М.
Isabell afro
Рет қаралды 27 МЛН