A really good demonstration on stripping of the 417, for cleaning and the same applies to the 416, 5,56 model. One of the better ones I have seen. Thanks for the demonstration.

Thanks, good video. It's simpler than I thought. Just like a "normal" AR15 with a few improvements. The gas piston is simple, too, hardly adds any complexity at all, really.

This was so thorough and helpful. I feel much better about disassembling mine. Thank you for this.

I've never seen another rifle that has such massive and rugged looking parts as that HK does. That thing is built like a battleship ! It's a Beast of a rifle ! Thanks for this video.

Boss Guido Thank you so much for all the info. I really appreciate when people with experience chime in. I am still fairly new to shooting so I try to soak in as much info as possible, provided that it makes sense (and yours does). Your comments are not offensive and are more than welcome. Thank you again for responding and for watching my vids. And thank you for your service.

Excellent, extremely helpful!

Man thank you a bunch!! Was trying put it pack together and almost hammered on the pins Didn’t know about the tool in the buttstock

Excellent and thorough review. Congrats on the beautiful and high quality HK rifle.

Thanks for this video, just bouth a MR308 (European version of MR762), it's my first rifle and and video like this really help for starting =)

Picked mine couple weeks ago...got to shoot it couple times since. And I've love it ever since great accuracy...and handling...head turner for sure at the range. I'll be picking up its little brother the MR556 next week.

Very helpful, thanks

Nice rifle!!!

I live in California too..... I hate bullet buttons! But I'm glad I saw this video because I can't wait purchase this beautiful weapon! .... in maybe a year, because it's so expensive.

Hi, great video and great looking weapon, curious though, I find it strange HK don't put all the tools in the rifle to fully strip it? that tool in the stock, has the small end for the pins but it looks like the other end of the 'L' end is a hex key, have you tried that in the handguard bolts? I mean no disrespect

Hey man, I live in California, and I have the choice between a Lewis Machine and Tool, M1A, mr762, or Larue Predatobr. Which you would you choose knowing what you know?

Hey MV, I just bought the mr762a1. love it! Do you clean the piston rod? first time cleaning so i dont want to make any mistakes. Thanks

Are the diameters of the takedown and pivot pins the same as on an LR-308 or AR-10? Also, would standard LR-308 charging handles work with this? Thanks

Oh btw Mosin and sorry for commenting so much (I hardly come online got a cold so stuck in bed and bored) But don't' clean the gun so much. You know what wears out guns and barrels etc? Not shooting but cleaning. Ive shot near 10k out of my SCAR 16s, Ak's or other piston guns and never clean em. So unless you use corrosive ammo which is very rare. You really shouldn't clean it after ever use you will do more damage than good. Like I said our family owns a quite large gun shop and range etc. Even in my day job as a Fed Leo or in the military we never cleaned after every trip to the range tho when I was on deployment in the sandbox aka Iraq then yes but its because of the sand. You don't shoot in the desert do you? Then again if not don't clean it so much as like car brakes you have to allow the barrel etc to break in and by cleaning it so much you are not seasoning the gun so to speak or not letting it break in.

I know this is an old video but I’m wondering why you say not to lubricate the gas piston on gas cylinder? It says in the operators manual that these parts must be lubricated.

Is this CA complaint version? trying to understand what makes this so special? considering all AR's are made the same way.

Thanks for the video. How do you clean your gas piston? Mine always seems to get some pretty tough carbon on the very end where it goes into the gas chamber. I think yours had some too, maybe I'm just being particular.

Hi there cool video, I have a little question, have you ever removed the bolt catch/release from this rifle? I'm having a hard time removing the clamping sleeve for it and i'm afraid to cause damage, any tips?

Btw some little tips for the MR 556 and 762. Dump the butt stock its crap the friction fit wears out with use. I would get a Magpul stock. And for those who don't want the stupid disassemble tool pins you can switch em out to std pins. Hk just did em for accuracy so you won't have that springy push to the upper and lower but then you won't have to worry about the dumb tool. This gun breaks down like anyother AR just the bolt is a bit easier to clean. Tho Ive shot over 5K rounds thru my 762 and never cleaned it yet. Oh btw never ever put any sort of lube on any part of the piston or piston cup on any piston type gun. Just added advice some info from a 30yr collector/shooter my collection runs in the 400+ range. And I own just about every Hk rifle and pistol made and just about every major .308 rifle the MR762 is a great shooter like all Hk firearms fit and finish is the best in the industry. I'm FED LEO and also part owner of my family's gun shop with indoor range and many of my family either works or owns company's in the gun industry. So we know a bit about guns lol! ;) Stay safe everyone. No offense to the channel owner intended.

Still have it? How’s it holding up? Round count? Accuracy? Lots of questions I know 😁

Hi， in California, which dealer can you buy HR MR762? I am looking to buy one. Thanks.

ok

❤🇩🇪👈👍👏

Hhh my father I need your helps

it would be nice if you explain how to reassemble you be more detail. Stop using terms proper place, show it. Not all of us mechanical inclined.

Hi, great video and great looking weapon, curious though, I find it strange HK don't put all the tools in the rifle to fully strip it? that tool in the stock, has the small end for the pins but it looks like the other end of the 'L' end is a hex key, have you tried that in the handguard bolts? I mean no disrespect