In this video I breakdown the HK91 type rifle for you including the bolt carrier group.
Пікірлер: 203
@quackersizboss25929 сағат бұрын
Jesus man you saved my life. Okay not really, maybe my thumbs. But I just bought one and naturally started disassembly without a video. I put the bolt all the way in the locked position and couldn’t figure out how to undo it. Knew there was a trick and you showed me how to “fix” my issue (general confusion)
@TheKlamminator Жыл бұрын
The real MVPs are people like you that make youtube vids like this. Super helpful
@shnsn55602 жыл бұрын
Thanks. Just found your video. It's a "complete" disassembly & re-assembly vid and is all that is needed to get access for most cleanings. Procedures also work well for the PTR 32 (7.62X39mm).
@domoore5463 жыл бұрын
OK, First I want to THANK YOU for the video. Second, I want to THANK YOU for the video. I just got my first PTR 100 and there is NO way I could have taken apart and put it together without your help. At one point I was screwing around for 10 minutes putting the bolt to the carrier, then I used your method, DAMN! You are like the buddy I don't have when it comes to what the hell did I do here!
@VEightMerc1243 жыл бұрын
Glad I could help!
@Ali-s1103 жыл бұрын
O man I loved it, used to have this gun(G3) when i was serving military in iran. Thanks
@Chris-pb3se Жыл бұрын
I spent 20yrs assembling my HK91’s bolt in a similar way. Last year I bought the bolt tool. Best 30$ I’ve spent in years. I got it from RTG but plenty of places carry it. I can’t recommend it enough
@terryboone333311 ай бұрын
What kind of tool is it? And who is rtg?
@Chris-pb3se11 ай бұрын
@@terryboone3333 Google ‘RTG parts’ it comes right up. They have a whole category named ‘HK91-G3-PTR-91’. Tons of tough to find things there. The bolt tool is there.
@peacehere14488 ай бұрын
website is robertrtg the tool is called a HKG3 bolt carrier disassembly and assembly tool. Like 20$. Has an adjustable screw that applies pressure to the bolt catch so you can easily put the bolt back into place.
@TheHorta2 ай бұрын
Sir! You just flagged me with your disassembled bolt! Sincerely, Safety Sally.
@odinson11111 Жыл бұрын
Esse é, sem dúvida nenhuma, o melhor fuzil que já existiu Muito obrigado
@richardxo5072 жыл бұрын
Your video was the only one that went in depth on putting the bolt together fully, I am mostly an AR guy so I don't have the same knowledge as yours. Good Job!!!!
@texaspreppertom24559 жыл бұрын
Great video. I have had mine out only one time so far this year. The only thing I don't really like on mine is that the charging lever is very difficult to move toward the operator. Maybe it will get easier with additional use. At least I hope that is the case. I can tell from seeing yours that I do not have nearly enough grease on any of it. Maybe after I grease it, it will get easier to operate. It is a very accurate rife and that was the primary reason I got the rifle. Take care and stay safe. Again, great video.
@filiphaglund78172 жыл бұрын
My main gripe with this weapon is how awkward the safety is to operate. I by no means have small hands, but I feel like it was designed for people with thumbs that are at least 15-20% longer than mine are. I almost always have tilt the rifle slightly sideways to get a better reach for the safety.
@ronaldraygun2639 Жыл бұрын
I live in California so holding the rifle is awkward itself.
@MrRty7899 жыл бұрын
Great video !!! Thanks I am about to purchase one and this was very informative. I used a suppressed HK MP5 25 years ago on a team and loved it. I can't wait to get it now. Thanks Semper Fi Giles
@00ironcross3 жыл бұрын
Semper Fi
@jodyboi7163 жыл бұрын
Awesome video man I thought I messed up at one point but I was fine thanks to you
@TheStuart-of-Cosby Жыл бұрын
Yeah same here had my apart lol and I locked to bolt carrier together lol I locked the roller pins were locked out lol I freaked out for a minute when trying to get it to slide back into the gun. Was like dam done broke something
@michael862 Жыл бұрын
1 the lever isn 't ment to be pushed down 2 when you Mount the head of the bolt. Push it to the bottom, pull it at bit foreward - as you did - but then push and roll the rolls, and the head Should move foreward to the coerect position. 3 you can use the strap around the head if it is hard to turn it 4 when assemblying Some just pust the head to the bottom and then inserts the bolt backwards in the frame and gives it a hard push, so the rolls are knocked back in place. Dont do that... 5 the carabin in the strap can be used to unscrew the mussle break by putting it in the Groove it has. 6 the handle Should be slapped down when loading. It is the correct way and it is half the fun. You accually risk getting a malfunction if you don't slap it. And people Will point and laugh. Beautiful gun
@UnknownUzer5 жыл бұрын
FYI : For those looking for a Disassembly video, this is NOT one. this is just a field strip.
@maxreed7690 Жыл бұрын
This is a very professional video
@00ironcross3 жыл бұрын
I just bought this rifle. Great video
@cbwelch46 жыл бұрын
Hey what’s up, Dude? It was a circular route, but I did finally pick up a PTR 91. What got me was the price and some research. The gun did well in several mud tests and it has a reputation for being accurate. We’ll see. It shows up next week.
@TheBryanArnold4 жыл бұрын
Perfect video for the issue of those rollers. Thanks.
@terryboone333311 ай бұрын
I spent about an hour last night trying to get my bolt back together. It wasnt as easy as you showed but i wasnt doing it like you did. Should have watched your video first .
@jefflitten664 жыл бұрын
Thank you ! Got my trigger grip out to Send to Bill Springfield on my Ptr.
@JMark-zk5pj4 жыл бұрын
Got mine back from springfield a few years ago, intermittently fired on "safe", and sometimes did not fire on "fire". pulled that pack out, and replaced with a stock one from HK parts. Very disappointed in his work.
@lincolnshammer-57877 жыл бұрын
Great video. Awesome with the safety tips. Didn't know that the holes in the butt stock wer fer thaty. Thanks👍🏽
@sbkain7 жыл бұрын
Hello, I love all your videos and I have learned a great deal over the years.* I also live in California and I wanted to let you know that I own a PTR 91 and plus another HK91 clone I think that's one of the most fun rifles there is for the open desert and just about any Terrain. yes it's heavy but it's also a 308 design for Full Auto the sixties.So that being said, just wanted to give you the heads-up that nutnfancy and his son put together a video as of July 23rd and it's a little rough for us PTR owners. please keep up the awesome work you're one of my favorites to watch on KZfaq. Stu
@VEightMerc1247 жыл бұрын
Thank you sir!
@pfdcaw5 жыл бұрын
Thanks man the bolt carrier was my issue. Good video.
@westerntactical Жыл бұрын
3:15-3:20 These two pieces will not separate on mine, they’re like stuck together and everyone I see online is seamlessly able to pull it out.
@Jim89M8 жыл бұрын
You put the pins in the opposite direction.. there s a reason for the pin heads must be to the side of the shoulder strap. This way prevents them for loosing them in a long military march.
@MinhVu-in9iz4 жыл бұрын
Thank you for the video, def helped with the bolt!!
@flattire4243 Жыл бұрын
WOW absolutely beautiful video !! Thanks for sharing ❤🙂
@sojourn15448 жыл бұрын
very good video. .step by step...easy to follow. ...
@benlaubacher74623 жыл бұрын
Just got mine... thanks..very helpful.
@ArsLanHGunner9 жыл бұрын
Nice video! Very informative, thanks a lot:)
@danthoreson40624 жыл бұрын
Awesome job. Thanks
@PacificAirwave1442 жыл бұрын
Yeeeears ago I got a HK-91. ~40-rds, one deer, back in the safe... I got it home that afternoon and cycled the action and the bolt came out of the ejection port :-/ And nights of KZfaq videos learning about the HK-91, Really a couple great videos on this now including this one. No tools required, but gloves are recommended...push, rotate click, rotate the other way are the rollers out, rotate, yank real hard...repeat 'til it looks right. Designed right? Maybe the early manuals ended the field-stripping before removing bolt from the carrier? :-)
@petrosapetros7152 Жыл бұрын
Hi. Nice video. Found it recently. Thank you. Could you show / make any comments on how to lubricate the G3 ?
@jimmyjohnson62323 жыл бұрын
Love this channel
@Cowboycomando544 жыл бұрын
Can't get the bolt to latch into the groove with out the roller being stuck out.
@domoore5463 жыл бұрын
He's got that in the video after 11:00, it took me a couple of tries but I got the rollers back the way God meant them to be.
@Cowboycomando543 жыл бұрын
@@domoore546 It can be bitch the first time you do it.
@clownbaby79854 жыл бұрын
I like your method thanks buddy.
@Magajarhead17759 жыл бұрын
Excellent video! Thanks!
@josephgutierrez88192 жыл бұрын
I think I messed up on putting the bolt back in, what I noticed is different from what happened to me and in the video is the side with that slot inside of the bolt is facing the side of the Carrier with the pin, my bolt with the slot is facing the opposite direction and I can’t pull it out and even when I get the roller unlocked I can’t make a full turn in either direction, I could use some help
@Ghost353. Жыл бұрын
Thank you!
@Millie.1965Ай бұрын
Ive been having difficulty chambering a round. Works flawless without a loaded mag. Worn ejector or anything specific?
@johnbrowning87852 жыл бұрын
Rotate the bolt-carrier group "counter-clockwise".
@jorgemartins39695 ай бұрын
Foi a minha arma no exercito, G3, tinhamos que desarma-la e voltar a armar com os olhos vendados em menos de dois minutos, e para desrmar o grupo do pin de disparo usavamos a bandoleira, muito mais rapido e muito mais facil.
@todd.m69968 жыл бұрын
Mine is not firing consistently (primers not being struck), about every three to four shots it has the miss fire. I'm using German surplus ammo from the early 80's made by Yugoslavia that's has a really good reputation for being reliable.
@todd.m69968 жыл бұрын
+Brian Spears thanks I'll have to try that!
@masonmaloof51317 жыл бұрын
Brian Spears hey, so you just filed down the feed lips of the mag? I'm having the primer strike problem too
@loondoge9402 Жыл бұрын
8:10 he starts reassembly
@alfredoverno9674 Жыл бұрын
great video. thank you. I will actually try to find one now. I had been uncertain of the TAKE DOWN, now I can inspect one before I drop a bunch of money on one. are there any things that would stand out as (warning signs) when inspecting one for purchase? thank you friend.
@VEightMerc124 Жыл бұрын
Cant say i know of any warning signs. Just ask if any internal components have been changed and why.
@oswaldotorreslopez13754 ай бұрын
Nice 👍 rifle
@Ywn4L Жыл бұрын
What if my rollers doesn't go back down is that bad ?
@arbilois3 жыл бұрын
Great video!
@jonathanfriedman83434 жыл бұрын
Nice job, thanks.
@snipyshot1177 Жыл бұрын
I can't even remove the stock on mine lmao. Good video tho
@warnersims3 жыл бұрын
I have a G3 clone and it has an issue with misfeading the round and jamming it up against the trunnion and pressing the bullet into the case more. No amount of cleaning and lubrication seems to help...
@VEightMerc1243 жыл бұрын
Try different magazines loaded to full but shoot only a few rounds from each.
@driesmertens8 Жыл бұрын
works for xr41 as well :)
@ryodtjdkgdkyjgditdjtdjtdtstid Жыл бұрын
Please tell What is the thickness of hk g3 stamped receiver ?
@puropaisa32947 жыл бұрын
You right i live in California and I don't like all this rules we got about bullet button 10 round magazines and now we need to register all this rifles to assault weapons i own the ak ar and other hand guns but I want to buy this one you showed in this video but I don't make before dec 2016 i m a road driver and in my gun dealer tell me I need to be fiscal in town and I arrived to san diego in December 23 after 2 months in the road not enough time fo the waiting 10 day period so now my collection is going a be incomplete about the rifles I liked nice video nice explain
@eclectic36182 жыл бұрын
Will it accept c308 wood furniture???
@vamvam73006 жыл бұрын
Good video, i Think that rifle is Made in USA. The original one HK G3 is Made in Germany 7.62 x 51mm If your are a soldier you have less Possibilities to get wounded prisoners. This rifle with that kind anmuncnition is lethal. I got one when i was soldier. If i had to go back to the Army I'd like to have one Heckler and Koch G3, now i'm a simple citizen and to have one a those H K G3 Rifle is Big responsibility. I want to have the replica Collection... Thanks for the video
@davidsequeira1771 Жыл бұрын
If anyone has advice how to clean inside of the breach. I can’t find any real cleaning tools to get inside and fingers can’t get in either. Cant get any brush in there. I feel like I can never actually properly clean inside this firearm
@rickycinaz9 ай бұрын
What’s the hk 91 handguard metal hook used for?.
@robby47389 жыл бұрын
Great Video. Its an easy rifle to take down. I just got mine and plan on shooting it soon. Did you actually "break" it in or did you just load her up and blast away? I'm debating if I want to go through the grueling task of breaking her by way of the steps presented in the manual.
@VEightMerc1249 жыл бұрын
i just shot it. i didnt blast away though. havent cleaned it since i bought it back in Dec. of 2012!
@nibbarkfc28634 жыл бұрын
Oh it's call me kevin
@gunsandstuffinfo779Ай бұрын
Will this be this be the same way you take apart a ptr91 pdw9???
@VEightMerc124Ай бұрын
@@gunsandstuffinfo779 it will be mostly the same. The bolt on the 9mm is shorter. And should be locking
@strategicgamingwithaacorns28748 жыл бұрын
1. Is there a G3 variant with a quick-change barrel (like the HK21?) 2. Is there a G3 variant that can be fit with Picatinny Rails? 3. Is there a G3 variant that has both a quick-change barrel and Picatinny Rails?
@tellrowland52035 жыл бұрын
You can get a set of pinch rails for it. They clamp to the upper and sit just above the ironsights.
@GreenCanoeb5 жыл бұрын
PTR GIR model has the Pic rail. None I'm aware of have a quick change barrel.
@jolmos71948 жыл бұрын
Do you think .012 mm is safe for bolt gap? only has 300rds thru it.
@mje30553 жыл бұрын
VERY NICE
@Alkaline7.625 жыл бұрын
A little off topic but I just picked one of these up and the pin that holds the front handguard Ian is extremely loose any ideas on a solution with a new pen fix this or do I need to figure out some kind of safety wire
@GhostRecon_PT5 жыл бұрын
U need to keep an eye on it, no tricks, we used G3 on army and we allways keeped an eye on all pins
@cokfarm13397 ай бұрын
Any idea how to replace the recoil spring on a retractable rod? Its what the pdw comes with.
@VEightMerc1247 ай бұрын
I believe there is a “cap” thats retained by 2 small pins that when removed the spring comes off
@cokfarm13397 ай бұрын
Thanks I figured it out. The retractable rod actually just unscrewed very easy !
@soheylmoheb72734 жыл бұрын
Thanks for the great video ... pretty straight forward. If you had added at the end of the video a fast disassembly - assembly, it would have been awesome. Maybe you can just make another video where you do it fast and share the link at the bottom of the video. anyway ... thanks a lot ... enjoyed it.
@michaelf19008 жыл бұрын
I tried the method you used , but my bolt is too tight and will not go in unless I push it back in the locked position then force it forward with a screw driver
@VEightMerc1248 жыл бұрын
make sure you follow the steps closely. full screen the video and 1080p to see how the lever pops onto the bolt then how I slide it on the ledge. The bolt is supposed to be reasdembled without tools. It is not easy to do, I understand the spring tension is pretty stiff.
@michaelf19008 жыл бұрын
Something is wrong with the bolt, it does not move or rattle like yours does, I am going to have it looked at
@markbennettjr7 жыл бұрын
Bolt will not go back into receiver? The bearings stick out to far. I don't know what I did wrong
@tellrowland52035 жыл бұрын
You have to have space between your bolt and bolt carrier when in the proper position
@manyskunks8 жыл бұрын
The PTR91 isn't a clone as it's made om the H&K machinery & tooling purchased from H&K. H&K no longer makes them. So, PTR Industries bought the tooling and machinery and they are "same as" except for a few upgrades.
@tellrowland52035 жыл бұрын
That's what clone means. Same rifle, different company. A 91 is not a ptr design so it has to be called a clone.
@chriswillings49582 жыл бұрын
Same steps for ah fa91?
@williamwaters680312 күн бұрын
Should be. I just bought an fa91
@ramon39607 жыл бұрын
I'm surprised you can have this rifle on California
@mikeypops739 жыл бұрын
Nice, thanks.
@VEightMerc1249 жыл бұрын
you are welcome!
@claudiagamino64999 жыл бұрын
do you have a vid on how to install the original bipod. Do you know where I can find the original bipod?
@VEightMerc1249 жыл бұрын
i have a vid on the bipod, you can search for it on my channel search bar.
@tribui1197 жыл бұрын
do you plan to make your rifle featureless? If so, do you know how to install the magazine release lever, like the AK's?
@VEightMerc1247 жыл бұрын
Unfortunately yes, my bullet button now is just a cover so Ill just uncover it and run it like normal. I dont think I would do the paddle release, now that I think about it...if its cheap enough and not too invasive I might try it. There are videos out there showing how to do it.
@theblooms8 жыл бұрын
Why are my buttstock take down pins SO DAMNED TIGHT?!?!? I mean, like, so damned tight I have to use a pair of pliers to pull them out.
@tellrowland52035 жыл бұрын
Push in on the stock when removing em.
@GhostRecon_PT5 жыл бұрын
U can use the Mag to Pull them
@chuckabbate12648 жыл бұрын
what does the bullet button do? How does it work?
@VEightMerc1248 жыл бұрын
it prevents the regular mag release from working. so instead of using your finger, you need a special tool like the tip of a bullet or screw driver. but Cali has now defined a bullet button as basically a regular mag release, so we cant use that to get around the law anymore.
@PrinceShehzad Жыл бұрын
Is this bolt carrier the same as an HK21 bolt carrier?
@flattire4243 Жыл бұрын
I think he said one pin holds it back from being full fun/auto 😂
@joemartinez54052 жыл бұрын
What sort of grease do you use for bolt assembly?
@VEightMerc1242 жыл бұрын
I always use the red valvoline stuff. Sticky and hangs on for a long time. I used be on the white lithium train, but it melts away quick and can get crusty dry over time
@rodrigoc.goncalves20092 жыл бұрын
Anyone else studying for a military conscript?
@daddyspacebear9 жыл бұрын
There's one for sale at my local Cabela's for $3,000
@RevolutionV129 жыл бұрын
Not worth it by any means.
@the4armedmonk9 жыл бұрын
RevolutionV12 it would have to be a real HK91
@daddyspacebear8 жыл бұрын
+Michael Walker It was an original HK-91. Sorry I didn't know this was a clone when I first saw this video. It had a bipod and collapsible stock.
@tellrowland52035 жыл бұрын
Even a real hk91 g3 isn't worth 3k. And that's full auto version.
@claudiagamino64999 жыл бұрын
where can I find a reasonable priced bipod for this rifle?
@yoson88348 жыл бұрын
+claudia gamino amazon
@tellrowland52035 жыл бұрын
This should read 93 not 91. 91s have one rear pin for the stock.
@GreenCanoeb5 жыл бұрын
You got it wrong. Title is correct.
@lockhd_mrtnАй бұрын
that paper sounds horrendous
@bwahchannel97463 жыл бұрын
sw3?
@glenpaul36062 жыл бұрын
Watch Panzlaff do the bolt disassemble reassemble in under a minute. You take far too long, it's not that difficult.
@1Guy1SonyVegas9 жыл бұрын
hi, can someone explain the fake 3rd pin to me. What does the fact that this is a semi-auto gun, have to do with the 3rd pin being fake?
@oscardelta12579 жыл бұрын
1Guy1SonyVegas If it had a REAL third pin it would indicate that the firearm is capable of firing fully automatic. Some people like to have a fake third pin to replicate the military version of this firearm.
@1Guy1SonyVegas9 жыл бұрын
Oscar Delta Yeah I realise that fully auto version has 3 pins, and semi auto has 2 pins, but I just don't get it why, haha. Why don't both of them simply have 3 pins? I doubt that it's just to indicate if the gun is semi or fully auto, or am I wrong?
@oscardelta12579 жыл бұрын
1Guy1SonyVegas If you get caught by the ATF with the 3rd pin in your firearm and you don't have a class III license or the title to a class III firearm with the third pin then you will be spending a lot time at "club fed" and have to pay a 10K fine to boot. The ATF looks at any select-fire parts on a firearm as the intent to build one even if all of the parts aren't in the gun to make it select-fire. Thats why people use a fake third pin, because its just the head of the pin and nothing else.
@1Guy1SonyVegas9 жыл бұрын
oh, thanks man, now it's all clear to me :)
@VEightMerc1249 жыл бұрын
+1Guy1SonyVegas this all depends if the cop knows anything about the pin. but even just the third hole will get you in trouble. the pin holds the auto sear in place on the reciever. And this metal lower was restored by someone else who installed the head and tail of the pin. I didnt even know it had it.
@Panzlaff9 жыл бұрын
Not the right way to put the bolt carrier together, no force neccesary. You didnt know and didnt explain the purpose of the window ...
@Kalumbatsch8 жыл бұрын
At least he's not trying to force a screwdriver in like in the old video. That was actually painful to watch. This rifle has been issued to millions of soldiers and there are manuals for this stuff. No need to try and figure it out for yourself.
@r.k.69782 жыл бұрын
Türk askerinin eğitim oyuncağı.
@pvnawa7 жыл бұрын
Watch the Germans do it right at G3 bolt assembly German Airforce Way
@AltyazıDünyası5 жыл бұрын
ben gözüm kapalı söküp takıyorum askerde öğrendim.
@cagdasbinici31135 жыл бұрын
bedelliler gelmeden
@thorkill82467 жыл бұрын
You really are not supposed to tamper with the gun. It should be left together as it was made. Monkeying with mechanical objects only degrades there performance
@geiroveeilertsen71127 жыл бұрын
THOR KILL I don't know if you're trolling, or if you're unfamiliar with gun maintenance...
@kiturselassie8134 жыл бұрын
Clone g3 not the original..
@Niafi116 жыл бұрын
Its Cool that people make Videos to help others, but I have to say this." I HATE when they Mumble." Gets my nerves like nothing else.
@onurg046 жыл бұрын
Artık askere gitmeme gerek kalmadı lul
@knell8466 жыл бұрын
Onur Gülbeyoğlu lol
@jesusflores17422 жыл бұрын
Wrong disassembly sequences for sure
@TheMexican18218 жыл бұрын
Is it the same for the C93/HK93
@VEightMerc1248 жыл бұрын
+TheMexican1821 Yes it should be
@TheMexican18218 жыл бұрын
VEight Merc I been thinking about getting a C93, I've shot the PTR-91 and love it. I want to get a C93, change the handguard, and add a bipod. Sounds crazy I know lol XD.
@VEightMerc1248 жыл бұрын
Thats exactly what I did to mine. Lol
@TheMexican18218 жыл бұрын
VEight Merc to your PTR-91 or your C93?
@VEightMerc1248 жыл бұрын
Ptr 91. I changed the grip frame, handguard, and stock. I have a video outlining the rifle.
@user-ug3gp2bv7e8 жыл бұрын
ببب
@9mmisgod9 жыл бұрын
uhhh?
@VEightMerc1249 жыл бұрын
Mosin Nagant hahaha, I had some uploading issues. All fixed now!
@9mmisgod9 жыл бұрын
VEight Merc You and me both i uploaded a video 3 days ago and youtube kept cutting my video to 1 min when it was supposed to be 10 min vid idk whats going on?