HKS BOV Install W/ Pulls! (Veloster N)

Рет қаралды 16,450

3 жыл бұрын

Hey dudes, another install today! Decided to go with HKS on this one since the Turbosmart failed on me. Let me know what you guys think and how you like the sounds!
Here is the part if you guys want to check it out-
www.realstreetperformance.com...
*Keep in mind this is the UNIVERSAL version so you will need to purchase on adapter for your car.
If you have an N this is the adapter you will need-
www.torquesolution.com/HKS-BOV...

Пікірлер: 96

@TheEducatedtroll 3 жыл бұрын

Bro this channel is sick keep it up all other channels now days are garbage this is the content I need install and pulls you would think that’s not hard but damn this is the only channel that does it at least for the N

@revmatchproductions 3 жыл бұрын

Thanks man i really appreciate your words!

@RoastinFN 3 жыл бұрын

Thanks for the vid, looks awesome and sounds great. Just pulled the trigger on a performance blue VN on Sat, cant wait to start modding.

@revmatchproductions 3 жыл бұрын

Nice man, they are amazing machines you will love it!

@marchnte 2 жыл бұрын

Great videos, keep it up. Love seeing the build and installation videos

@revmatchproductions 2 жыл бұрын

Thanks man i appreciate it

@geraldgoodiii6993 3 жыл бұрын

They sound so good. I had a Forge but when I got tuned it was dumping all my boost at low throttle (prolly when hovering around where vacuum goes to positive boost).. would hear psssssssssss as I slowly accelerate. Stab gas and it would be good and then hold 21psi). Later that day I bumped into a dude at a meet with an AV6 for $125 (500 miles on it) tossed the AV on and zero issues. Wish it sounded like that Forge tho when it was stock tune. Later on I find out i needed to tune the BOV. Duck that

@revmatchproductions 3 жыл бұрын

Yeah thats interesting cuz forge site says that bov is made for i30/veloster n and it talks about how good it is, then it doesnt work lol. But i actually do love forge stuff they make good products. Their stuff is even on real race cars. But about the AV6, i love the design just not the sound, its a little too quiet for me kinda like the stock one.

@perziano6134 2 жыл бұрын

@@revmatchproductions Hey man your car is amazing! So i have the 2018 Hyundai Elantra Sport and i wanted to get a BOV and a Solenoid as well.. However, I'm a total newbie and can't figure out all the parts and adapters i need... is there any way you could link me the right BOV with Adapter and the right Solenoid with everything to get it going? Please and thank you! then i can buy it and go to a garage and have them install it.. Greatly appreciate it

@vlandicho5141 4 ай бұрын

What size plug did you get to cap the hose that used to go to the stock bov?

@Anthony-kd4sy Ай бұрын

Have you had any issues with this bov on your N currently looking to install this bov on my Elantra n so wondering how it’s been over the last few years for you

@geraldgoodiii6993 3 жыл бұрын

I been running an AV6 but when I dump at redline or at full boost it is a choppy release. Like compressor surge thru the BOV. Maybe spring not strong enough. Anyway.. said fuck it and ordered the best. HKS! Can’t wait to hear that clank sound it makes when it dumps!

@revmatchproductions 3 жыл бұрын

The Hks has a very unique chirp due to the pull type valve, i love it! I still love the old school whoosh from the other bov’s though

@fustin_ 3 жыл бұрын

Nice! I will say, I have same adapter and BOV and mine does not rotate that easily (really have to put some force into it for mine). I doubt it is causing you any leaks or anything but you may want to take a flathead or something and make sure the snap ring is fully seated into the groove (I had to do that with mine and seems it is a common thing others have to do as well). I also can highly recommend the MAC solenoid paired with this setup.

@revmatchproductions 3 жыл бұрын

The ring has a flat side and a slanted side, the flat side goes on the bottom. Its actually tight it just looks like that in the video. It should take force to rotate but not a crazy amount of force, if its that hard your ring may be upside down. It should also feel smooth when you rotate it when installed correctly, kind of like a rotated turbo kit

@fustin_ 3 жыл бұрын

@@revmatchproductions Yeah, I made sure the ring was the right way (tapered on top). I just remember the install videos I watched said that even if the ring snaps in, make sure to go around and check that it is seated deep enough into groove to be safe. Before seating it in deeper it spun a little too easily for my liking. Anyway, keep going with the build! Looking great!

@revmatchproductions 3 жыл бұрын

Thanks man i appreciate it!

@JeLifeCoach 3 жыл бұрын

I was thinking the same thing. I have the HKS and it should NOT rotate that easily. Clip not fully locked in.

@racingmostwanted 6 күн бұрын

Where did you get the plug cap for the intake?

@MrTiguil 3 ай бұрын

the torque adaptater dont come with the package?

@TheColonel915 2 жыл бұрын

So all you need for this install is the 2.0 genesis bov from hks? Or do you need to buy the adapter and hose seperate?

@revmatchproductions 2 жыл бұрын

You need to also buy the adapter for it to mount onto the charge pipe, a company called Torque Solution makes one. It says its for stinger 2.0 but its the same engine it works perfect.

@thefinestdetail7619 Жыл бұрын

Is this adaptor the same for the i30N, I’m wanted to say yes as pretty much everything is is like for like the exact same? Also did you notice any extra lag in the turbo from venting it all to atmosphere rather then it recirculating?

@revmatchproductions Жыл бұрын

Yes the Hks works on any of the 2.0t platforms, but you will need to order an adapter to fit. You can get one from Torq Motorsports. No lag just more sound

@kivros206 Жыл бұрын

I have a 2021 VN DCT (stock) and I've been wanting for so long a better BOV sound. I wonder if that one will fit perfect on mine? Also I'm thinking on the AEM intake. Any suggestions on that?

@revmatchproductions Жыл бұрын

Mostly all of the bov’s out there will work on the N platforms. Aem is good, any intake will give you more turbo sound as well

@bnz7253 Жыл бұрын

hey man i just had a question, about to place my order for this BOV soon, been watching many installation vids and looks really easy to install. however, i still don’t get where the vacuum hose runs to after you attach it to the BOV? where does the other end of the vacuum hose connect??

@revmatchproductions Жыл бұрын

It connects to the boost solenoid thats mounted on the intake right before the throttle body

@bnz7253 Жыл бұрын

@@revmatchproductions ahh awesome man, i appreciate it very much 🙏🏼 placed the order yesterday, can’t wait to install this beauty

@HEAVENLY2023. Жыл бұрын

Do it affect warranty?

@jesusferrer9832 3 жыл бұрын

Hey! I have been driving my car now FBO stage 1 high torque and it’s insane!! I’ve been killing CTRs and STIs lol. I also have the HKS BOV and it’s amazing. Hope you enjoy it as much as I do!

@revmatchproductions 3 жыл бұрын

Great to hear man, im really loving the HKS sound!

@flat4wankel 3 жыл бұрын

Whats your mods? To be killing CTRs thats good results.

@jesusferrer9832 3 жыл бұрын

@@flat4wankel FBO stage 1 high torquw

@revmatchproductions 3 жыл бұрын

Basically intake, inlet, intercooler, charge pipes, downpipe, spark plugs and tune. You also need a catch can

@elitres8811 2 жыл бұрын

Hey brother, was wondering where you got your blind spot mirrors at ? If it was from Amazon could you please link me them I’d really appreciate it

@revmatchproductions 2 жыл бұрын

They actually came on the car, i didnt buy them

@scuffedracc 2 жыл бұрын

Want to put an hks but I’m afraid it’ll mess things up because it will no longer be recirculating back into the intake. Have you had any issues with the Bov?

@revmatchproductions 2 жыл бұрын

Not at all, the Veloster N is a non MAF based car which means it has no air flow sensor before the turbo. This is good for tuners as you can go recirc or vent to atmosphere it doesnt really matter. If anything its more beneficial for the turbo to go with a bov like the hks. You will have almost no compressor surge which helps improve the life of the turbo, and always getting fresh external air when getting back on boost after a shift. I recommend you get one!

@valkyriesnp Жыл бұрын

1 year later from my first comment on this video, and I now have a 2022 N with this bov. Question: does your's also kind of start opening up and releasing constantly if you build too much boost or go a bit high in rpm's (not to red line)?

@revmatchproductions Жыл бұрын

Yes, that is normal. The HKS actually has two valves compared to most bov’s that only have. One is for low boost and one is for high boost

@valkyriesnp Жыл бұрын

@@revmatchproductions Perfect. Thank you for clarifying

@Fernando-zs5yr Жыл бұрын

Hey i just bought a 2022 DCT veloster n and want to put the same hks blowoff valve you have in the video as its first mod. Is this bad for the car? Any other suggestions or recommendations?

@revmatchproductions Жыл бұрын

No not at all, if anything its better by not recycling the used already hot air over again. Running a bov allows the turbo to always get fresh air from the atmosphere only, on and off throttle. Plus it sounds sweet and looks nice in the engine bay!

@SgtLilTony 5 ай бұрын

I definitely love the sound but im new to turbo cars. My biggest concern is that I have heard that the noise you hear from the flutter is compressor surge that might hurt the turbos longevity. I don't know if anyone might be able to speak on that in this specific scenario, but if it would be negligible, I would love to hook up my 2020 N with this BOV

@aechronos403 4 ай бұрын

tthe vn doesnt have enough boost to have any compression surge, the stock diverter valve already has "flutter"

@dubiousmike 3 жыл бұрын

Loving the sounds. Maybe not head mounted in the future?

@revmatchproductions 3 жыл бұрын

What do u mean?

@revmatchproductions 3 жыл бұрын

The way its facing?

@originalmusic401 2 жыл бұрын

hey what did you use to plug your bypass valve on the intake system?

@revmatchproductions 2 жыл бұрын

Its just a little rubber cap, measure it on your intake to make sure you get the right size. Mine was slightly too small but i was able to stretch it on and it worked even better since i dont have to put a clamp on it. Just google bypass valve cap

@oldinolo2780 3 жыл бұрын

Hey so I’m waiting for my catch can to arrive. I already have an Afe takeda intake installed. What purpose would a BOV do and is it beneficial ?

@revmatchproductions 3 жыл бұрын

A bov will let you hear the surge of air that is released when you shift or let off the gas pedal. Its mainly for sound but can also help for more proper and precise venting. The stock valve is okay but its all plastic, if you go aftermarket the build quality is just a lot better and will outlast the stock one. Also gives you the full turbo sounds you want when paired with an open intake!

@oldinolo2780 3 жыл бұрын

@@revmatchproductions I do not have an open air box intake. The Afe takeda comes covers like the OEM. Will it still make the wooshing ? Or will it be more suppressed ?? Follow my IG @GreatBamDino

@revmatchproductions 3 жыл бұрын

Its a little more quiet but you should still have the turbo surge noise when you let off at low boost with just an intake, the bov gives the loud whoosh for the push type or psshhuu if u get the Hks pull type, they work even on stock intakes

@jesusferrer9832 3 жыл бұрын

Did you also get new tires and rims? I’m going with Enkei Ts-10s (18.8lbs) and Mich Pilot Sport 4s for that insane traction that we need 💪

@revmatchproductions 3 жыл бұрын

No not yet, still spinning on the stock P Zeros lol

@LoneStarStinger 3 жыл бұрын

Stock bov is super loud with K&N intake

@LoneStarStinger 3 жыл бұрын

Nvm I clicked the wrong video. It’s loud with the stingers

@G1tommy 3 жыл бұрын

Great video! Was wondering where you got the cap for the intake? Been searching for one and I can't find it haha

@revmatchproductions 3 жыл бұрын

Right here bro! hpsperformanceproducts.com/products/hps-high-temperature-reinforced-silicone-coolant-cap-bypass-heater-core-delete-black-blue

@G1tommy 3 жыл бұрын

@@revmatchproductions Much appreciated! What size did you get if you dont mind me asking haha

@revmatchproductions 3 жыл бұрын

I actually dont remember to be honest lol, just measure yours cause i think its slightly different size for each intake. Unless you have the Forge intake as well

@G1tommy 3 жыл бұрын

@@revmatchproductions I have the forge one! I shoulda mentioned that.. that’s my bad.

@revmatchproductions 3 жыл бұрын

So it doesnt have to be exact, but you want it to be tight. Mine was actually one size too small so i had to kinda stretch it on, thats why it has no clamp its on there really tight. Im pretty sure i bought the 25mm

@matthewjavelet1107 3 жыл бұрын

No cel from running an aftermarket bov with the stock solenoid?

@revmatchproductions 3 жыл бұрын

Nope, has been running excellent!

@streetstylincardetailing 2 жыл бұрын

hey! where did you get the cap for the intake on the bypass from the bov?

@revmatchproductions 2 жыл бұрын

I dont remember tbh bro sorry, i just searched for hose cap or bypass valve cap and i found it. Make sure to measure the size before you purchase, but i believe its around 1 inch

@streetstylincardetailing 2 жыл бұрын

@@revmatchproductions thanks bro! Appreciate it I’ll take a look

@tsloan1283 Жыл бұрын

Thanks for the video, Unfortunately I don't think any BOV sounds good on our cars. All the ones I have listened to sound to much like a bird whistle.

@Iegend17 Жыл бұрын

Would it sound this good without air intake?

@revmatchproductions Жыл бұрын

The purge will sound the same yes, but you wont hear the turbo with the stock intake unless you’re at wide open throttle with the windows down

@elliott1515 2 жыл бұрын

What’s size vacuum line did you use past the little filter

@revmatchproductions 2 жыл бұрын

Im not sure the size but its the one thats on the stock bypass valve, it runs from the solenoid to the valve. The hoses that hks include are good but it slides off the bov with little force, even with the little clamp on there, so i just re used the stock one. Everything works perfect

@jstrout626 2 жыл бұрын

Little late to the party but does this have an aftermarket exhaust on it

@revmatchproductions 2 жыл бұрын

Nope all stock!

@petermad7476 Жыл бұрын

New to the platform, is this save for the turbo?

@revmatchproductions Жыл бұрын

Yes, if anything it will improve the life of your turbo by releasing the excess boost instead of recirculating it and causing compressor surge

@valkyriesnp 2 жыл бұрын

My 2016 Veloster Rally Edition was totalled by a flood last week... I really want this upgrade, but they're pricey for me. This video made me want it even more though lol 🥲

@ashtenmorrison5059 2 жыл бұрын

are these like special hoses or are they stock parts

@revmatchproductions 2 жыл бұрын

They supply hoses with the bov but i used one of the stock ones cause theirs was slightly too large in diameter for the hose that runs to the solenoid.

@idacian74 3 жыл бұрын

Awesome install, HKS BoV looks awesome too. Honestly I can't stand the high pitched sound, is there any other adjustments to make it sound a bit more whoosh than this high pitch whistle? Keep it up.

@revmatchproductions 3 жыл бұрын

Thank you. Yes there is different tips you can put on that change the sound, but i think it will still sound similar. Im really into different bovs however so i might try a Greddy or AV6 down the road as well, i liked the turbosmart but it broke unfortunately due to poor quality control

@idacian74 3 жыл бұрын

@@revmatchproductions Hey, thanks for the reply. I like the looks of AV6, small compact and almost "kinda" OEM look a like. Hopefully before i pull the trigger ill see you install one in the near future. Ill go amd do a search on YT see how it sounds and perform. Thanks for the heads up and letting me know about the adjustment on HKS. Keep it up, can't wait to see your next mods.

@revmatchproductions 3 жыл бұрын

Thanks man i appreciate that.

@Fernando-zs5yr Жыл бұрын

Do you notice any reduction in power?

@revmatchproductions Жыл бұрын

No nothing like that, but this mod is really for sound and looks. I would also however suggest a short shifter, it makes the gears closer and more notchy. Overall more fun to drive