HMMWV M998 Airlift Bumper Installation

Рет қаралды 8,386

4 жыл бұрын

Here are the part numbers that you will need:
P/N Desc
Main Bumper Parts:
12469405 A2 AIRLIFT BUMPER ASSEMBLY, REAR NSN:2540-01-196-4920
12446989 LH OUTER BRACKET NSN: 5340-01-408-8523
12446990 RH OUTER BRACKET NSN: 5340-01-408-8529
12338194 SUPPORT,BUMPER INNER NSN: 2540-01-196-4723 (x2)
12338164 SPACER,PLATE NSN: 5340-01-205-5377 (x4)
12339186 BRACE ASSEMBLY,BUMPER OUTER NSN: 2540-01-257-3877 (x2 This is OPTIONAL)
Accessories:
12447089-2 REAR BUMPER SHACKLE RING NSN: 5340-01-412-7514 (x2)
12342354 SHACKLE NSN: 4030-01-316-1551 (x2)
12339332 PLATE,RETAINING (Towing plug adapter plate) NSN: 5935-01-421-4801
Fittings:
(FOR BUMPER & SUPPORT BEAMS)
16x 1/2-13 X 3.00 Bolts
8x 1/2-13 X 4.25 Bolts
2x 1/2-13 X 3.75 Bolts
26x 1/2-13 Lock Nuts
56x 1/2 Flat Washers
(FOR SIDE SHACKLE)
2x 1/8 X 1.25 Cotter Pins
2x 5/8-18 Castle Nuts
2x 49/64 I.D Flat Washers
(FOR FRONT LIFTING SHACKLES)
2x 3/32 X 1/2 Cotter Pins
2x 3/4-20 Castle Nuts
2x 3/4 Flat Washers

Пікірлер: 33

@kurtlesser2684 3 жыл бұрын

Dude, that inner brace to the pintle hook that you left off is where your pioneer rack latches on to hold it in place.

@miguelestrada8779 3 жыл бұрын

I know a 3 inch when I see one🤣🤣🤣love the channel brother.

@nitrofish1974 Жыл бұрын

It really compliments the hum. nice work 👏

@sammiller170 2 жыл бұрын

YES SIR... I CONCUR WITH CHUCK... VERY WELL DONE AND LAYED OUT VIDEO... THX A MILLION... I JUST BOUGHT ME A 1990 M998 AND I'M GOING TO BE GETTING IT ALL DRESSED UP AND LOOKING LIKE A HIGH DOLLAR CIVIL HUMMER H1... JUST NEEDED TO SEE WHAT ALL WAS INVOLVED TO PUT ON MY REAR AIR LIFT BUMPER NOW I KNOW...

@PracticalTacticalFedeli 2 жыл бұрын

Best airlift-bumper install video available!!

@jimbella9353 Жыл бұрын

PLEASE ...consider using "IMPACT' sockets whenever using an Impact wrench; The Air-lift/tow hooks are to mounted using a castle nut.and wave-washer so enough tension can be applied to prevent the "hook" from flopping (rattle) around. The original "Pioneer Kit" will work with an Air-lift Rear Crossmember, but additional bracketry is required. Forgot to transfer the 2 Pintle Hook diagonal braces to the Air-lift Rear Crossmember.

@Osakaenterprisellc

Sure helped a lot . Thank you.

@chuck1607 2 жыл бұрын

That was a very informative video. Well done sir.

@nirpeer1202 2 жыл бұрын

Great video Thank you!

@veuvava1529 4 жыл бұрын

Thanks for the video. It is a good help indeed. Much appreciated.

@billyraematthiasonian4598 3 жыл бұрын

Great work. Thank you

@cruiez2008 3 жыл бұрын

Very calm presentation.

@farmsgrace341 3 жыл бұрын

Damn, dude. You need to get you some friends. HMMWV parts are heavy. Helping hands are necessary some times. You handled the bumper very well, though. Congrats.