Да, сегодня это намного проще!

I’m in the same business and for the paper parts I always use the white Kittifix, a German product. Beware: they also make a colourless version, but that one is less suitable for paper.

I built this model using mostly ordinary yellow wood glue. I tried other glues, but found that this works pretty well. However, I used other glues as well, depending on the specific purpose. For instance, to laminate sheets of paper together to build-up the thickness of parts, I used 3M spray adhesive. Since it contains no water, it is less likely to cause a distortion of the paper. When I am working with very delicate parts, I have found that touching it with thin Cyanoacrylate glue (CYA or super glue) - the paper will soak up the glue and become stiff, like plastic. This makes it easier to cut sharp edges. Also, I can work with the piece with less concern about ruining the piece. I can also carve the CYA treated paper , since it is like plastic.

Thanaphol Chumkhammool I hope they reply to you! I’d love to move on from plastic kits.. I’m hoping they come in booklets?!

The laser-cut framework is a heavy card stock. It is heavier than the paper used for the parts and the laser-cutting is PERFECT. Everything fits together so nicely, and in a very short time, you have a complete framework for the model that is pretty sturdy. Sorry we didn't answer you sooner! As for the paper format for the printed parts, the parts are mostly on large sheets of glossy heavy paper. For parts that are not visible on the final model, simple blank and white print on generally thinner stock is provided - similar to printer paper.

It's probably about as difficult as a wooden model kit, except you don't need as many tools as a wooden kit, and you don't make a mess. There is no wood dust! You can do this on the kitchen table without making your spouse upset. It just all paper and a little glue. The most difficulty is that there are a LOT of little parts to cut, so it takes time. I used brass cannon barrels and wooden blocks, which saved some time and look very nice. The more time you spend on the model and the more careful you are, the nicer the model will turn out. But, if you are in a bit of a rush, you can still build the model, but it may not look as nice. In that sense, the model is not difficult, but getting the nicest results is more difficult.