They have more than just that lol

Glad it was helpful! Feel free to watch another 10 of our videos though 😅

Nice

Glad you enjoyed and it helped! Cheers for watching :-)

Syc 16102 pro stock can get 50kmp and with 3s lipo you can get 80kmp, it only cost $80

No worries, that's what this channel is for!

That's what its there for! :-) Welcome to the club haha

You're welcome!

Hope it was useful!

Thanks!

Cheers, hope it helps!

@@HobbiesDirect yessir

That works for smaller pitch gears, but as you get to 0.8mod/32dp, that trick may cause binding. Good trick when it works though!

Glad you enjoyed it!

MAXIMUM POWAAAAAAAHHH!! ...and you're welcome :-)

You're very welcome!

From an Aussie to an Aussie, welcome!

Thanks for watching!

Thanks! Just a little GoPro, it's been through a lot!

Great idea!

And surprisingly smooth for non-sensored! We used that exact battery in the video; an NXE 5000mah 2s :-)

You will need a brushless esc to run any brushless motor. If you already have the traxxas brushless ESC, it should be able to do it as long as you keep the kv down to about 3200. And if you haven't already, add a fan to the VXL-3S ESC :-)

This one 🙂 hobbiesdirect.com.au/SkyRC-GSM020-GNSS-Bluetooth-Performance-Analyzer-SK-500023-02v The app is called "GNSS PA", it's made specifically for this module :-)

Yep! Brushless motors need to be controlled by a brushless ESC, and there's very few ESCs out there at can do both brushless and brushed. You don't technically *need* a fan, but you do need to stop the ESC overheating. If it's not getting to hot you might get away with not having a fan, but its not recommended.

Being an Australian shop i'd say he only sells KPH not MPH......😬

Only if it has enough channels to run the heli - and make sure it comes with a new receiver as well, it might be hard to match what is already there 🙂

Can't think of any AFHDS receivers that have built in gyro, and the transmitter couldn't control/adjust it anyway. You'd be best off installing a separate gyro :-)

Nice! Glad it helped :-)

Can you help me out please What brushless Waterproof Motor can go 100kmp and a good ESC that would go with it

@@RC.Car.007 In what car? 100km/h isn't too hard, but having a car that's drivable at the speed definitely is.

I hsve a LRP 120803 S10 BLAST MT 2 BRUSHLESS RTR 2.4GHZ - 1/10 4WD ELECTRIC MONSTERTRUCK

and my budget is only $230

Nice!

If you can get a faster motor to fit, then yes. This one would be too big though, and we don't want to destroy the toy-grade gearbox of the awesome looking Rastar!

Another 540-550 sized motor - so like a 3650 or 3660 brushless. Don't go too big though, the drivetrain was never designed for that level of power and it wouldn't take much to start breaking stuff.

Watch the scene again :-) If the motor is spinning the wrong way, you can swap any two of the wires to reverse rotation. For sensored systems, this is done in the ESC programming.

Is it only at full throttle launches, or everywhere? High powered 2wd cars with no gyro can be tough to full-throttle launch in a straight line. Instead, try easing on the throttle :-)

@@HobbiesDirect Its everywere

You can use any motor that fits, but the best and easiest way to get more speed in the Quantum+ chassis is to go big on the pinion gear; the stock car ratio is very conservative. Getting the car to handle at 60+mph is going to be the real challenge though haha.

Not without strengthening the gearbox and wheels, no. And it would likely run a bit hot. That said, you'd have a theoretical top speed of 90km/h+, which is very fun as long as you don't crash.

So glad you asked! It's a custom made thing based on an HSP Flying Fish drift car, with a bunch of carbon fibre heli parts.

@@HobbiesDirect mf is cleen 🔥

Thanks! It has a search light that turns with the steering haha.

Senton is bigger and faster, with more option parts. Gorgon is cheaper, and drives completely different. Ultimately, they are two very different cars - just be careful to not diff out and blow the tyres off the Senton on it's first run!

Knowing nothing about your car, This would be pretty sweet: hobbiesdirect.com.au/Surpass-Rocket-V2-Supersonic-3600Kv-Brushless-Motor-w-80A-ESC-Combo-SUR-88341

Higher voltage battery (if it can handle it) or higher kv motor?

You can make anything faster, but keep in mind the more power you have, the more you are stressing the drivetrain, and you don't want to break hard-to-find parts. Probably just go for a hot brushed motor in that one :-)

Yep! Though we recommend going for a slightly bigger motor, like 3660 size and a maximum of 4000kv.

Huge favour. what would you recomend for a 5th scale baja? motor, esc, and battery. subbed and watching your vids. thanks for all the help so far

@@kempek11 Big things, like this hobbiesdirect.com.au/p/26365/hobbywing-ezrun-max5-v3-56113sl-800kv-brushless-200a-motor-and-esc-combo-38010600 and the highest capacity battery you can get.

This one seems to be like an updated "quicrun" Max10 that was around a few years ago. Same tuning parameters. Gotta say, for sensorless and comparatively high kv, the motor is super smooth and punchy with almost no cogging.

@HobbiesDirect the old sc10 had a tuning card and for old stuff was good. Im assuming the max 10 has the same if not better adjustability. Soft start on a rwd is nice, kind of like traction control but more like making the thing easier to not go too hard too soon on a thing if its just a hobby if you arent a full on into it racer.

I think the 'sc' series became the 'SCT' series, the heavier duty 'Short Course Truck', which also explains it still being with us.

@@RTmadnesstoo That makes sense!

Except you *can't* double the voltage of a 7.4v 2S if the maximum voltage the system can handle is 11.1v 3S.

Steering will never be connected to the ESC, your servo wire goes into the receiver 🙂

But my steering servo has five wires that comes out from it, and my new receiver I can only plug-in three wires

As long as it all plugs/bolts in, there's no reason why it shouldn't 🙂

Thank you@@HobbiesDirect

How fast does it tipicly go?@@HobbiesDirect

Depends entirely on the overall gearing of the car@@RocketNation-

Can this esc take a lot? Is the esc better in comparison to maba xlx2? Does it start up in flames?@@HobbiesDirect

Watch this part again :-) kzfaq.info/get/bejne/Y85xordiv9mmdX0.html Recalibrate your ESC (the procedure is in your car's instructions), check your radio channel reverse settings, and make sure your motor wires are plugged in right.

Reckon the drivetrain would be fine, at least for a while. Handling would be questionable though haha

Time for an upgrade!

Honestly, the rebranded Hobbywing 3300kv 60A combo that the Viper BL comes with is really tough. The 4000kv is about 20% faster, so it's up to you. You could put the money towards an upgraded servo and wheels instead :-)

@@HobbiesDirect I appreciate the reply. I’ve got upgraded servo and wheels and tyres already. Nowa the time to go faaaaster before I go to a xmaxx or something similar.

You may get by replacing just the motor since both ESCs are 60A but I would play with the pinion gear first. Just be sure to check your motor temp after a full throttle run.

@@RTmadnesstoo any thoughts on what pinion gear size/s you’d try?

@@glitchedenemy3806 I'd just go up a tooth or two at a time while checking motor temps. Go up until it gets too hot after a long full throttle run or acceleration suffers then back off one tooth. Then you have pretty much maxed that motor combo out. 'Too hot' has been defined by many as 'you can't keep your finger on it for a 3 or 5 count'. Temp guns go on sale often so just watch for a good deal. You can buy incremental gear sets of 5 gears from places like Amazon which is cost effective. They may not be the best gears but when you find what you want you can buy a good hardened or chromed one as your 'trial' gear wears out. Probably be time for the other gear by then also. I've found the factory poly gears are best -and quietest -for those replacements. Just don't make big radical changes and you should be Fine. And Have Fun.

Ugggggghhhhh 🤣🤣

Nice!

@@HobbiesDirect I put your logo on the my car

@@sonnybray07 Even better 🙂

@@HobbiesDirect I think you are the best place to get parts and upgrades

@@sonnybray07 We certainly try to be!

Word.

No worries!