Hobbywing Quickrun Fusion in the Grand Hauler

Рет қаралды 8,079

3 жыл бұрын

Got the Hobbywing Fusion 1800kv motor ESC combo installed in the Grand Hauler. Still probably too fast for a semi, but it sure is smooth.
Find me on FaceBook: BlueDuallyProductions
Find me on Instagram: bluedually4x4

Пікірлер: 35

@karlhaipee7662 2 жыл бұрын

That looks sick and moves so smooth I was wondering about dropping a brushless system 1/14 semi

@mattiasrc 2 жыл бұрын

Nice looking truck and it runs smooth with the Fusion system in it.

@BlueDually4x4 2 жыл бұрын

The fusion is a great system. I have the 1800kv in a crawler and another 1200kv in the snowplow.

@CarmineRC 10 ай бұрын

You're the second one I've seen with a Fusion in a Semi. SMOOTH! I've got a 9 tooth pinion on my motor, and a 2-1 Gear Reduction Unit in mine... The 1800kv version should be perfect.

@DanielGonzalez-mj3he 3 жыл бұрын

Oh my that’s one sick truck love it man

@DanielGonzalez-mj3he 3 жыл бұрын

Hey question where did you get the red and blue hoses if you don’t mind me asking

@RC-CARS-WORLD 3 жыл бұрын

Awesome truckk broo, looks great 👍👍😀

@calebsuszko5135 3 жыл бұрын

LOOKS GREAT!

@BlueDually4x4 3 жыл бұрын

Thank you.

@Intotheout. 9 ай бұрын

Damn beautiful truck

@BlueDually4x4 9 ай бұрын

Thank you

@MrLunithy 3 жыл бұрын

I really wanted to know how this would go... and don't worry it's got axle snapping power.

@CMBProjects 3 жыл бұрын

Nice truck! You would liketo see my homemade 1/5 49cc RC car!!

@carlospatricioaguero3902 4 ай бұрын

Si le pueden poner una camarita por dentro sería bueno 🎉...

@williammills1300 3 жыл бұрын

Great looking truck . Looking into getting a truck myself , might look at the 1200kv fusion for mine .

@BlueDually4x4 3 жыл бұрын

Thanks. I am getting a 1200kv to put in this truck. I put this 1800kv in a crawler.

@hummer3d3d 2 жыл бұрын

If you don't mind me asking what color of paint is that is that one of the Tamiya paints?

@BlueDually4x4 2 жыл бұрын

It's a Testors paint, Emerald Green on white primer.

@MARKLINMAN1 2 жыл бұрын

Where did you get the black rims and wheels from? Are the wheels aluminum? I am starting my grand hauler build and would love a complete set of black rims in aluminum, thanks in advance.

@BlueDually4x4 2 жыл бұрын

They are the stock Tamiya semi rims painted black. The front rim is a stock Tamiya wide front that has been painted black.

@breeze0413 2 жыл бұрын

Nice where you get the airlines

@BlueDually4x4 2 жыл бұрын

Made them out of some beading supplies from a craft store.

@thewizard1196 3 жыл бұрын

Can I set up a 1900kv motor and a mamba x esc and still use my mfc-01?

@BlueDually4x4 3 жыл бұрын

The mfc is set up to run a brushed motor along with all the other functions. A lot of people run a 55 or 80 turn brushed with it. I don't know how you would set up the mfc without it running the motor.

@thewizard1196 3 жыл бұрын

@@BlueDually4x4 I currently have rc4wd 80t just not enough for me lol...could check it out on my Chan

@BlueDually4x4 3 жыл бұрын

@@thewizard1196 most people go for the 80 for torque and scale speed. A 45 turn would be faster and still have plenty of power.

@thewizard1196 3 жыл бұрын

That rear bumper...where you get it?

@BlueDually4x4 3 жыл бұрын

I designed it and 3D printed it. You can download it and print it yourself from here: www.thingiverse.com/thing:4583824

@thewizard1196 3 жыл бұрын

@@BlueDually4x4 🙏🏾

@thewizard1196 3 жыл бұрын

What’s the kv on that motor?

@BlueDually4x4 3 жыл бұрын

In the test it was 1800kv, but I have since put a 1200kv in it.

@TeriWilde 8 ай бұрын

it sounds like the pinion it meshed too tightly in the transmission. I've built 100s of them transmissions and they all run silently.

@BlueDually4x4 8 ай бұрын

Makes the same amount of noise as it did before the motor swap. And I still use the paper method for pinion mesh. Its currently apart for sound kit and some other changes, so I'll check it over.