Holley MoParty 2023 Jeff Smith Memorial 1320 Shootout Drag Racing

Рет қаралды 1,518

Күн бұрын

We're taking part in our 3rd Holley MoParty at Beech Bend Raceway Park in Bowling Green, Kentucky. As always, we enter the 1320 Shootout, the only drag race class of its kind in the entire country that is solely for the 1320 Dodge Challengers, That also makes this the largest gathering of angry bees in one place. This year's class is extra special because it's been named in memory of Jeff Smith, a proud 1320 owner who dominated the NMCA circuit before sadly passing away.
Check out my Amazon Storefront for all the stuff I use in racing and on my Challenger, Ram, RV, Towing and more- www.amazon.com/shop/scavenger1320
Affiliate Links to some of the stuff used or seen in this vid:
iOttie Windshield/Dash Phone Mount - amzn.to/39TmQVk
GoPro 11 - amzn.to/3CA8fv7
Great thing about using the above links is that it doesn't cost anything extra but helps me fund this channel through commissions earned. Plus it's so much quicker than searching online!
XS Power Lightweight Lithium Battery that only weighs 7.5 pounds! - 4xspower.com/product/xv4800/
Chapters:
0:00 Intro
1:20 Day 1 Time Trial #1 (Run #1)
3:15 Day 1 Time Trial #2 (Run #2)
5:12 Day 1 Time Trial #3 (Run #3)
9:00 Day 1 Time Trial #4 (Run #4)
10:12 Weigh-In
11:57 Day 2 Qualifying #1 (Run #5)
14:38 Getting pulled aside by tech for being non-compliant
20:14 Jeff Smith Memorial Gathering
23:15 Day 2 Qualifying #2 (Run #6)
25:56 Day 3 Rain Delay
26:47 Day 3 Elimination Round 1 (Run #7)
29:42 Day 3 Elimination Round 2 (Run #8)
33:28 Jeff Smith Memorial 1320 Shootout Final Round
Social Media:
Instagram - / scavenger1320
Facebook - / scavenger1320
For Business Inquiries and Sponsorships email me at: scavenger1320@gmail.com

Пікірлер: 43

@fluxcapacitor9867 7 ай бұрын

I been looking forward to this one !

@artillerybuff2000 7 ай бұрын

Me too!

@carwashpowerbrake2779 6 ай бұрын

Outstanding, Chris! Thanks for the vid, great work. You are nailing the tree!

@Scavenger1320 6 ай бұрын

Thanks! although I still need to work on my consistency at the tree.

@paulmarglin6286 7 ай бұрын

Really good video as always. Those red lights are killer. I always feel like I beat myself.

@Scavenger1320 6 ай бұрын

Thanks! Yeah, this one has me a bit baffled too. As I was editing the video I slowed down my reaction and it doesn't look like I reacted early, so either my car decided to launch a little quicker than usual or I went in just a touch deep. But really I'm mad that I missed out on a great race, based on the timeslips it would have been a nail biter at the finish line.

@wh0wantsm0ke 5 ай бұрын

Great vid…. All the camera angles 🔥🔥

@Scavenger1320 5 ай бұрын

appreciate it!

@shaunhilliard2418 7 ай бұрын

Good video Chris! Had a great time running in our first Moparty this year. It was awesome considering we had over half the class pitted with us. Ready for next year, we'll get to come down Thursday this year

@Scavenger1320 6 ай бұрын

Thanks! It was great meeting you for more than 10 seconds in the staging lanes lol. Hopefully we get even more pitting together next year.

@ScatPackRob 7 ай бұрын

I had planned to attend MoParty and was looking forward to meeting you this year. Unfortunately life got in the way and we were unable to make the trip. Great video.

@Scavenger1320 6 ай бұрын

I can understand that, happened to me with a couple other races this past year. Just try and make it out for the next MoParty, I'll definitely be there again.

@challenger1320 6 ай бұрын

Nice work brother! Sorry I missed you guys in '23... I should be there for '24!!! Deep staging a pro tree has it's pros and cons... tough break man. I use a Braum seat in my 1320 and the local tack I use is very strict on the rules, I have to wear my jacket when i race there however, they have never said anything about my seat.... yet! lol

@Scavenger1320 6 ай бұрын

The Braum seat might not be as much of an issue. When I got a Braum originally it seemed really sturdy and closer to an actual stock seat. My Kirkey really is thin though and flexes a lot. I didn't even realize how much until last weekend. I tried out a new camera angle and put one of my cameras on the rear shelf facing forward, so it got a full view of me in the seat. Watching those clips during a run I could really see how much the Kirkey moves and flexes. Still waiting for the official 24 MoParty dates, but I definitely plan on going again so hopefully I'll see you out there!

@southernindiana1320 7 ай бұрын

I can't wait to see this one! I know I had a blast this year at Moparty, and it was great getting to meet you and hang out in the pitts!

@Scavenger1320 7 ай бұрын

Definitely, and I can't wait for next year. You still have the best brussel sprouts I've ever had lol. Still can't thank you enough for sharing some good hot food with me!

@patrickciarcia4100 7 ай бұрын

Nice runs…. MERRY CHRISTMAS 🎄 TO YOU AND YOUR FAMILY 🎉😎🎄

@Scavenger1320 6 ай бұрын

Thanks! Hope you had a great Christmas and Happy New Year now too!

@Jurassic392 7 ай бұрын

Solid video!

@Scavenger1320 6 ай бұрын

Thanks!

@artillerybuff2000 7 ай бұрын

Oh well, can't win them all! Enjoyed watching the video. I sure didn't guess the seat was the problem. Hey Chris, do you ever use launch control and preset your RPM's, or just foot throttle it every time? Thanks!

@Scavenger1320 6 ай бұрын

I have yet to even try launch control. I've only ever heard negative things about it, most of which makes sense, so I've never bothered with it. Except for when I'm going off idle I'm always footbraking it.

@PatrickReagan 7 ай бұрын

@18:00 I don't understand why tech is concerned about the seat when you're still on the stock tune. I use the Corbeau seat (no harness bar); a few lbs heavier but a little more rigid because it has a plastic shell.

@Scavenger1320 6 ай бұрын

stock tune or not I'm still a low 11 second car hitting 120. Slow compared to all the redeyes/demons, but fast enough that on older cars that would have required a lot more safety equipment. Corbeau and Braum seats may not concern them as much since as you said, they're a bit more rigid. This Kirkey though isn't and does have some flex to it, and Kirkey even says in their installation guide you're supposed to brace the rear as well. I always knew I'd need to brace it eventually so I can't be mad about it lol. The other issue though is like he said, the recent rule changes are there because of all the OEM crash safety equipment, and the seat air bags are part of that system. Even though the rest of my airbags are still functional, it's still missing one.

@Raisinbran392 7 ай бұрын

I appreciate your content. My questions is how do you bypass the air bag light? I run the drags at my local track and have pulled the passenger seat out and get the air bag light on.

@PatrickReagan 7 ай бұрын

Dummy plugs available thru Ron Silva

@Raisinbran392 7 ай бұрын

@@PatrickReagan how do I get a hold of him? Do you have a link?

@Scavenger1320 6 ай бұрын

@@Raisinbran392 He's only on facebook. If you're on there send me a message through my page (Scavenger1320), and I can link you to his facebook page on there.

@Raisinbran392 6 ай бұрын

@@Scavenger1320 haha how funny! I’m literally making deal with him on Facebook messenger. Thank you so much. Looking forward to see what 2024 brings to your channel.

@eivad1 7 ай бұрын

I’m surprised you’re not running E85

@Scavenger1320 6 ай бұрын

Maybe one day, but for now I'm still on the stock tune. Who knows, I might test out the Advanced Fuel Dynamics kit first.

@1320_ikimasho 6 ай бұрын

I'm a Hellcat owner. Thinking about also buying a 1320 Last Call. Any advice/tips? Thanks!

@Scavenger1320 6 ай бұрын

It’s a fun car for sure. I know people that have had both and each has its pros and cons. Biggest tip I’d say if you get one is to take it straight to the tire shop and swap the front drag radials out for a street tire. Keep the drag radials on the rear so you still get to have fun with the extra traction and then when you burn through them you already have the pair that came off the front to use. Also make plans to come bring it out to MoParty in September for the 1320 Shootout

@1320_ikimasho 6 ай бұрын

@@Scavenger1320 Thanks so much! I've been watching a TON of videos on the 1320. A common thing I've noticed is the "wheel hop" when launching. I'm guessing that's more to do with the stock Nexen's.

@Scavenger1320 6 ай бұрын

@@1320_ikimasho the Nexens are decent drag radials but they do need to be heated up good to really grab, especially if the track prep isn’t great. But also they’re 20” tires, so there’s not much sidewall there and only so much they can do. If you plan on taking it to the track a lot I’d definitely get a set of dedicated 17” drag wheels

@1320_ikimasho 6 ай бұрын

@@Scavenger1320 I forgot to ask, does the 1320 come with a "Valet Mode?". Thinking of ways to prevent theft (besides the neutral switch blocking plate).

@Scavenger1320 6 ай бұрын

@@1320_ikimasho nope, no valet mode on 1320s. I think that’s part of the SRT Performance Pages, which comes in every Scat except the 1320 which gets the Dodge Performance Pages with all the drag mode stuff