Youngsters love gaming seats, I did too once as they do look good. My back now say otherwise :)

Thanks for watching

Thanks for watching 👍

I am still using this chair as I type, it does squeak a little which I think it needed some WD40 other wise still the best chair I have tested so far.

Hi, at 6:48 you will see me pulling the head rest up and the clicking noise the plastic makes. When I move the chair around by holding the head rest it will slide out of position but while in use it will hold position without dropping. May be yours is faulty? Since it is held by fiction I guess you could try stuffing some paper between the plastic parts which makes the clicking sound ?

I review a lot of chairs and products and this is my personal gaming chair since the review. It’s a keeper and definitely better than any budget gaming chair which looks like car bucket seats. Thanks for watching and your support 👍

I am 6”1

at 6:54 there is a photo of what the chair can tilt, there is a pull out lever to release the lock and you push the pin back to lock it in place once you get to your preferred tilt. I am typing and testing it out as I type as I forgot how it is done. Still my main computer chair at the moment.

@@BCreviews Thank you for answering quickly! It's difficult to find a chair that has a tilt lock (many have free recline but no lock and I'm not so much into a rocking chair) so I am considering this one :)

Legs are metal, Bottom of the cushion is plastic then a smaller piece of metal plate attached to the central rod (metal) connected to the legs (Metal)

Thanks man!

There are 3 recline adjustment where you pull the handle under the seat to unlock, good for a few minutes of leaning back to relax but I don't feel like doing anything for long period leaning backwards. The lumbar support does not have depth adjustment but it can be slide up and down by 4-5 inches. During the heat wave right now I am so happy that unlike gaming chair this one has net like fabric where air and heat can get through to stop sweating back. Since the video I had to tighten all the nuts once or twice, it started to squeek and a bit of WD40 and that is gone.

do you mean wheels size? 60mm if that is what you looking for.

Still using it 🤞 all working fine with just a little squeaking noise which I am sure wD40 will solve that

Much better than any gaming chair I have tested. Still my video editing and gaming set up right now

sorry, the box was long gone....

I only have experience with gaming chair and office chair, with back problem it is good to get some medical advise 👍

@@BCreviews thanks but who trusts medical advice anymore?🤣. Best solution for me has been low straight back basic office chair with double thick natural sheep skin to sit on.

Much better than my 3 other gaming style chair, foam is harder and thicker and since review it is still holding its shape. My gaming chairs are now pass down to my kids and this is my main chair

Yes, still using it as I am editing today video (another 4 hours). It starts to creak a little when I move but some WD40 will sort that

thank you very much @@BCreviews

Hard to explain as it is not really a normal cushion, it is a adjustable pad behind the main net backing. I guess you can call it soft but it is support through the overall net backing

@@BCreviews Thanks :)

I am 6”1

Only the leaning angle of the back is adjustable.

No you can’t remove it, it just slide up and down. Right at the bottom position it will be at your tail bone which it will do nothing much.

It annoyed me and i ripped it off :D@@BCreviews

@franz265 it’s only plastic so that too 😂

Not sure, not had that brand 🤔

The usual gas strut to move chair up or down

I am 6”1 and the head rest extend beyond what I needed, the only thing I don’t like so far is when I stand next to the table and lean on the chair (hand on headrest) it accidentally pushes it down too easily as the ratchet system is just plastic on plastic.

@@BCreviews Got it, thank you!

Yes, the usual hydraulics column for up and down

@@BCreviewsI can't seem to get mine to work?? I pull it out to unlock then pull up and nothing happens:(

@@kalebross8795got the same problem

Make sure the lever is the one where when you pull it will press the button in the top of the hydraulic piston. Other levers will lock and unlock the leaning part of the seat

When you pulled out the lever you twist the handle instead of lift or push down. When seated down and twist it forward it will force the gas pin and either let air out (lower) or when no weight on the chair it will let air in (higher) Hopes that help :)

Yes, I sell off most of my review stuff but kept this chair for my gaming

​@@BCreviews ok thanks. I'm just under 6ft 2 do you think it'd be OK? Also how's the cushion do you think it will it be good for 6+hours use?

Same as my expensive gaming chair, the foam is on the hard side but using it every day and there is no sign of it being compressed or squashed yet. My cheaper gaming chairs uses cheap foam and flatten after a few months of daily use

Much better than gaming chair , the foam did not change shape yet