Home Decor Idea - DIY Chandelier from PVC Pipe
Hello dear viewers! I made a Chandelier use PVC Pipe with my own hands.
This chandelier has a spectacular appearance, but it is not to very easy to do it yourself!
But if you want to make this chandelier, you will definitely be able to do.
If you want to do something like that, watch this video!
If you liked the video, please subscribe to my channel!👇👇👇👍
/ @ardodiy
Thanks!
00:00 Video started
00:04 We need a pipe with a diameter of 160mm, length 50cm + a pipe with a diameter of 110mm and a length of 150cm
00:09 cut off the broken ends of the pipe
00:24 mark 36 cm on the pipe and cut the pipes 3pcs
00:37 Cut the large pipe 12 cm high
00:54 mark the center on the small pipe
01:02 further from the center we make markings on both sides by 4 cm
01:14 We cut the paper exactly along the perimeter of the pipe and divide it into three even parts
01:37 cut out the middles
02:05 further from the center of the pipe we mark 6 cm
02:16 further from a small piece of pipe we cut off 9 strips 10 cm high and 2 cm wide
02:35 we clean the edges of the strips with sandpaper
02:43 to get a smooth cutting surface of the pipe, we grind the pipe on glass with sandpaper
03:08 marks all strips and fixes on the pipe surface
03:27 we bend the strips by heating with a construction hairdryer according to the markings
03:38 make another fold on the strip
04:04 glue the strips with a large pipe
04:27 remove the strip from the pipe with a knife
04:31 clean pencil marks with acetone solvent
04:43 cut out circles from the board along the inner diameter of the pipe
05:07 mark the center of the circles and make a hole for the bulb holder
05:20
on each circle, make 3-4 holes to remove the heat of the light bulb
05:32 glue the wooden circle using superglue with an activator
05:41 for the base of the chandelier, we need either a board or chipboard or plywood measuring 50 * 50 cm with a thickness of 2.5 cm
05:49 mark a circle with a diameter of 47-48 cm
05:52 divide the circle into 6 equal parts
06:13 cut a circle out of the board
06:19 make markings and drill holes for wires and ceiling mounts
07:06 mark the center of the circle on the back side and make a recess about 10 cm in diameter for the wires
07:39 in a similar way, we make a recess for the wires to the center
07:56 smooth the surface with wood putty
08:20 sand the surface
08:29 before painting we clean the pipes with acetone solvent
08:39 paint the details in 2-3 layers
09:27 after painting, we begin assembly, first connect the electrical wires to the bulb holders
09:40 glue the bulb holder in place
09:54 slight backlash will help you not to scratch the paint on the pipe
09:59 you have to work neatly even use tweezers
10:18 mark the wires at the height you want
10:24 fix the wires with hot glue
10:40 dimensions
10:42 sample photos and videos
#chandelier #pvc #pipe #ardodiy