Home made log splitter with log lift and four way adjustable wedge

Рет қаралды 60,235

3 жыл бұрын

This is the log splitter I built about ten years ago. It uses a Honda GX390 engine rated at 13 horse power and powers a 22 GPM Haldex pump. It uses three cylinders. One for the log lift, one for the splitting ram and one for the four way wedge. Don't try to build one of these at home in less you are prepared to spend twice what the ones at the box stores cost. But... they don't have a log lift, a four way wedge, a 25 gallon hydraulic tank, an outfeed table, a cup holder, and real steel!

Пікірлер: 38

@robertpronovost3839 5 ай бұрын

My box store brand is Champion. It rocks with a 26 gallon

@WaynesWorldGarage 5 ай бұрын

yes, 26 gallon is good. My hydraulic fluid gets hot after a few hours run time even with 20+ gallons of hydraulic fluid.

@allenbowick4716 2 жыл бұрын

You are a very smart man, I was wondering why you needed two valves for the ram & then I saw the auto return. Damn smart sir. Also loved the adjustable 4-way & deck @ the end. Work smarter not harder. I may have to cheat a little & copy some of your work. That's good ole American ingenuity at work, my hats off to you sir.

@WaynesWorldGarage 2 жыл бұрын

Allen, thanks for the compliment. But I borrowed this isea from the very well thought out and built Timberwolf Splitters.

@allenbowick4716 2 жыл бұрын

@@WaynesWorldGarage well if anyone asks I got it from you sir. Merry Christmas

@blackdaan Ай бұрын

i dont mind having auto return only on the return.. when you split you dont want you hands on the log.. that goes 10000 times good and 1 time bad..

@Meadowmuffinfarms Жыл бұрын

Nice splitter.

@WaynesWorldGarage Жыл бұрын

Thanks 👍

@57dtrain 2 жыл бұрын

Pretty good design 👍🏻 A couple things to note, the type of beam you used for main construction is called “wide flange beam.” I-beam has a much different cross section and they are both built for different applications. Also on your splitting blades, consider having a pinned connection to the small cylinder as that should take care of the lifting you are experiencing. Cheers.

@WaynesWorldGarage 2 жыл бұрын

Dustin, Thank you. That's a good point on the solid connection to the wedge. But.... I need to make it easy to remove... some of the big wheels with lots of knots have problems when I use the four way wedge, so I need to have it easy to remove. Not an issue unless I have knotty wood. And not little knots....

@andders2477 4 ай бұрын

we call them H beam

@57dtrain 4 ай бұрын

@@andders2477⁠H beam is a synonymous term yes.

@fricknjeep 3 жыл бұрын

hi there nice setup you did a nice build . do you know about surplus center that is where we get our hoses john

@WaynesWorldGarage 3 жыл бұрын

John, Yes, and I've bought from them before. This was painless.... I brought the entire machine to the hydraulic store and they cut/crimped each hose to fit. As you know, many of the hose connections are indexed since the hose doesn't twist. I could have used different adapters, but I didn't!! Hope to see you soon.

@samburk3635 5 ай бұрын

Any chance you could post the specs on that self return valve you used for your splitting ram? I have been designing one of these and I'm looking for the actual name of that valve, there are a few other makers out making similar machines, all $10k plus for one similar to yours. Excellent work and a nice machine!

@WaynesWorldGarage 5 ай бұрын

My valve is a Prince Auto Cycle valve with "power beyond" so I could attach and power the 4 way wedge. This part here is what I have exactly: RD525MMEE5A4B1. I bought them from these guys: www.splitez.com/hydraulic_valves.html They were great to deal with and very helpful. Good luck!

@Raul28153 2 жыл бұрын

I'm guessing you will be building a 6-way anvil in the near future . It's a nice rig you should consider tallying up all the components and their specs and selling it as plans. Yes people will pirate it, but you should make a few bucks on your engineering effort.

@WaynesWorldGarage 2 жыл бұрын

Thanks Raul. Well... the reality is I could not (or didn't chose to..) buy a commercially built splitter from Timberwolf... I modeled this after their splitter and that's where I got the thought of the log lift. And lifting the big wheels up is just not fun like when I was 25, or 35, or 45, or 55!!! Sadly, the price of steel is making fun projects like this really expensive now!

@carfvallrightsreservedwith6649 2 жыл бұрын

You need to change hose shops. I just had three 20" hoses made for under $85.

@WaynesWorldGarage 2 жыл бұрын

I'm not saying I got a bargain on the hoses, but price depends on the diameter of the hose... 2" hoses with fittings are expensive!!!!

@davidrehaluk8620 5 ай бұрын

Fuk I payed 40 to have 2 ends changed

@kyleshilman8541 8 ай бұрын

I’ve been wanting to build a splitter for myself and really like the machine you’ve built. How did you go about the design and measurements? Just from scratch? Or a set of plans? Any advice is appreciated! Thanks!

@WaynesWorldGarage 8 ай бұрын

Hi, I modeled after the Timberwolf splitters. But they cost big $$$! I did end up buying the 4 way wedge from them. Regarding design, I designed it around the steel beam I had. The log lift took some trial and error. The hydraulic pressures are not too hard to figure out. Most of it you can learn on the internet. There are some companies who sell valves and cylinders as a kit. Thanks for watching!

@kyleshilman8541 8 ай бұрын

@@WaynesWorldGarage Thanks! How long of a steel beam did you start with?

@WaynesWorldGarage 8 ай бұрын

@@kyleshilman8541 the beam is 82" long. The flat on the top is 8" wide. It's 1/2" thick. The vertical is 6.5" tall. I think it is W8X10.

@centraltaekwondo6275 4 ай бұрын

wow nice good job. How much money did it take to make this?

@WaynesWorldGarage 4 ай бұрын

A lot... the hydraulic hoses were over $1,000.... Don't tell my wife. Add an engine, pump, controls.... probably 3k.....

@centraltaekwondo6275 4 ай бұрын

LOL i m going to tall your wife @@WaynesWorldGarage

@michalmajer2830 4 ай бұрын

good day. I wonder what hydraulic distributor you have for extending the cylinder? cannot find in Europe.

@WaynesWorldGarage 4 ай бұрын

I bought them here www.splitez.com/log_splitter_wood_splitters.html good luck!

@stuarth43 Жыл бұрын

nice but use field fit hose terminals, do it at home so easy

@WaynesWorldGarage Жыл бұрын

Thank you. Yes, paying to have them done sent me to the poor house.....

@robertpronovost3839 5 ай бұрын

You could benefit from a six way

@WaynesWorldGarage 5 ай бұрын

I thought about that.... Might be in the future!

@rudymarrero9222 4 ай бұрын

Whats the size log lift cylender. Thanks

@WaynesWorldGarage 4 ай бұрын

it's 18"X1".

@jerrygoad3093 Жыл бұрын

That's too much machine for you bud all respect hell of a machine though

@WaynesWorldGarage Жыл бұрын

Ha! Too funny. Just welded up that way. Wasn't exactly planned!! Thanks for watching. Wayne