Home Projects: How to install a basement sink pump

Рет қаралды 19,674

Күн бұрын

In this video I show how I installed a basement laundry/utility sink pump to replace the original pump installed in a previous video. That pump was very problematic and had a lot of drawbacks compared to the one I installed to replace it.
Project Components:
Sink and Faucet Kit: amzn.to/3sNQZ4i
Simer Utility Pump: amzn.to/3LiHLn3
Check valve: amzn.to/3PcY6e1
PVC Unions: amzn.to/3Pc7ONJ
Tapcon Screws: amzn.to/2qC5AfD
PVC Glue Kit: amzn.to/2AU0EZN
Tools Used:
Milwaukee SDS Plus Rotary Hammer Drill: amzn.to/2JQ94nJ
Bosch SDS Plus Bits: amzn.to/2SXSuGr
Milwaukee M12 Fuel Kit: amzn.to/2JPGLWw
Copper Pipe Cutter: amzn.to/2PNlthH
Copper Pipe Cleaner Tool: amzn.to/2DuOU2b
Deburring Tool: amzn.to/2AT3QES
Bosch 18V Circular Saw: amzn.to/2SRbGWB
Milwaukee M18 Trueview LED Stand Light: amzn.to/2SYhrBO

Пікірлер: 27

@ethelbeavers 7 ай бұрын

I'm a disabled lady on a budget without a dad to teach me stuff. I'm going to try and replace our ejector pump myself and this was so helpful. Thank you so much for this video.

@briancnc 7 ай бұрын

I'm proud of you! Don't let your challenges be your limit, we can learn a lot on our own! Thanks for your kind words.

@ethelbeavers 7 ай бұрын

@@briancnc update: I DID IT 🥹 thank you so much

@jonathanthayer3716 4 ай бұрын

I saw this just in time. I was about to install the same pump you threw out for my basement kitchen sink. I had heard different opinions on it but the main thing was that it was loud. I just ordered the new basin/pump system…now I gotta go return all the 1 1/4 pipe and fittings and replace with 1 1/2. I guess it’s worth the extra few bucks to do it right.

@apmorales7187 5 ай бұрын

Good job amigo gad bless you 🙏

@urbanturbine 8 ай бұрын

Great video thank you. Who didn't recommend AAV? Also who said the discharge pipe should have been 2 inch?

@briancnc 8 ай бұрын

If you mean the drainage pipe, per code it should have been 2" which I changed it to, as the drainage load was exceeding the limit for that branch. AAV isn't recommended by the manufacturer, rather they expect you to vent to the exterior atmosphere, not sure why but I followed their recommendations as I've seen in another application where an AAV still allowed for some smell to come out

@advilshenk 4 ай бұрын

I have the same reverse osmosis system. I have the same under sink sump pump kit as the one you have. Anyways.... i bought an air admittance valve and i plan to install this kit set up in my basement for my utility sink and washer soon. I dont have a pvc vent pipe running thru the ceiling. Is there any way at all i Can use just an air admittance valve and not run pvc vent up the basement ceiling thru the first and second floors to roof? Thanks

@briancnc 4 ай бұрын

I asked the company and they said no. I will probably work just fine but there may be drawbacks, like the valve slamming closed on the motor, not sure what that causes long term but they don't advise it. I've certainly seen them done that way though just didn't want to risk having problems. Try to locate an existing vent stack you could tie into, you should be able to find one somewhere at least in your first floor and get to it from your basement stack like I did.

@worldview730 6 ай бұрын

2:09, copper air vent, didn't know you could even use that, thought it had to be cast Iron, or PVC.

@greenmarine5 Ай бұрын

I installed a laundry pump up system and didn't connect to venting because it doesn't need it, the only time venting is really needed is for sewage, everything else is code for extra expense

@Tracker7266 4 ай бұрын

I watched the original install and I'm a bit confused with the redo in this video. What size pipe are you NOW using for the discharge assembly?

@briancnc 4 ай бұрын

My discharge and vent (vertical pipes) are 1-1/2 sch 40 PVC pipe. I eventually tie into a main discharge line that's a 2" PVC, the one in the horizontal orientation.

@Tracker7266 4 ай бұрын

@@briancnc Thank you.

@Tracker7266 3 ай бұрын

@@briancnc What did you do with the old pump?

@briancnc 3 ай бұрын

@@Tracker7266 went to the 🗑

@jeffgomez4291 5 ай бұрын

Its been a few months now. Hows the pump holding up? Any issues?

@briancnc 5 ай бұрын

Extremely satisfied, no issues yet. This was definitely worth the upgrade.

@monday9026 4 ай бұрын

@@briancnc Can you give me an idea of how loud it is? Thanks very much!

@briancnc 4 ай бұрын

@monday9026 not very loud at all. Quieter than the pump I had before as it's housed in the pump enclosure. If you have any reservations you could just buy it and plug it in see how it works for your space, return it if it's too loud.

@audreysweeney5338 2 ай бұрын

How do you know that it is working

@briancnc 2 ай бұрын

Working in what regard? Running?

@greenmarine5 Ай бұрын

you should drill a whole in the PVC pipe inside the housing so the pump doesn't get vapor locked. Why the hell would you have a check valve after the trap that makes no sense on a sealed system

@briancnc Ай бұрын

The check valve is to prevent backflow. Albeit given the size of the holding tank and my vertical stack is pretty short I reckon if you had enough lift to get over the back flow could cause the pump to short cycle in the right conditions.

@briancnc Ай бұрын

Also on the air lock, I haven't had that issue yet but will keep an eye on it.