Brilliantly explained and executed. A very good lesson in CAD/CAM using Fusion 360 and wire EDM. Thanks for the video, it was very informative and interesting.

Note that in Fusion, as in most CAD programs, there's no need for an external calculator - you can just type the formula into the dimension box e.g. 360/42/2

Being self employed doing EDM Service on a pretty new FANUC EDM machine, I´m really impressed about your DIY machine setup and skills!

Thank you for a very well-done demo on a lot of things I need to learn!

Thanks for the video. Anything you and the community can do to help make this technology accessible to more is great! I would buy the generator in a heartbeat if I knew that I could build the rest of the apparatus quickly and reliably. I'm watching the other videos.

Wow, I am impressed. This man is gifted smart!

Man, I've got to say, that really is amazing work.

Really great video. Will have to check out your EDM build videos; did not realized EDM could be a home-shop reality. Thanks for going through the Fusion and CAM development--really enjoyed watching you develop the gears. May download your script when I try making your project with my 3-D printer. Thanks!

Very nice pieces that you cut with your BAX EDM WIRE BX17, thumps Up!!

That’s fantastic. I’m unlikely to make one myself but admire you skills and sharing.

@35:47 perfect advice, pure gold. Thanks

Could you please upload a video on the other two formulas, please. You don't need to model them but I just want to make sure I understand for the program I am coding. Thanks for the stellar video of how to make these planetary gears!!! This video by far has been the best how-to video I've seen on youtube!

Great vedio, thanks for sharing 🙏

This is more accurate than milling for sure. Good job man.

love it, but you skipped the part I was most interested in how do you make the pilot hole and thread the wire for the internal cutting?

Perfect works! I love your video

Great explanation of planetary gears, thank you. Question, the slide visible at 2:49, I believe the formulas are fixed carrier: w_s/w_a = -rho fixed annulus: w_s/w_c = 1 + rho fixed sun: w_c/w_a = rho / (1 + rho)

42 as result and you know the calculation has to be correct

very nice video, Thanks a lot and thumbs up. I am curious to see the videos of building the machine.

One wonder if you'll consider to cut a few gear for a custom made geared lathe machine?? I mean have nothing to loose asking... great video, I've already subscribed in all my 3 channels...

If there is arc generator electronic board assembly available to be bought separately and of lower price, then it will be good for diy guys as the current one is still a high price for most of them.

a good tuto work thans sir

What a great find! Awesome and thank you

Aha butiful😂🎉

I’ve watched a few of your videos and find them fascinating. Could I ask about the cost of consumables, what is the cost of the brass cutting wire for a project like this or one of your others.

What are typical Voltage and Amps used for this process? Thanks.

Subscribed. I am definitely going to build on of these!!! Do you have to have the wire held at both end or can you have a straight wire held from the top and just make multiple passes until it cuts completely through? In other words have it cut the way a normal cnc router would cut but with a EDM wire instead. Thanks.

very nice job! I wish you had recorded cutting the internal teeth of the annulus gear. did you predrill a start hole? this is my first time viewing your channel so I would have liked to see how you threaded the wire to cut those internal teeth.

good work

Hardcore nice! TOP

is a very goo job! well done!

Great video! What is the backlash of the gearbox?

vr good

Can this do bevel gears with angled teeth also?

brilliant and thanks for the fusion module to make internal gear i will try it :)

Fantastic...

35:00 cavitation pressure??

great video. i need an excuse to start making your edm machine

good work, perfect machnine!;) grats!

beautiful

Good Job

I wanna make a 3Dprinter extruder with this! How much should I expect to pay for the gearbox you made?

Excellent show-and-tell! Two of the three pins inherently over-constrain the mechanism. Could this disadvantage be put to good use by putting pretensioning-flexures on one or more pins to eliminate backlash from the gear-train?

why dont you put teeth on the outer diameter of the ring and add another planetary to move the same speed so the outer planetary is bigger and it makes a 1 to 1 ratio increase torque why didnt anyone put teeth on the outer diameter of the ring

very nice video!!

What about the minimum modulus you can make on this machine, can it go down to 0.3?

Me Gustoooo!

Is it possible to make a planetary gear system without the central sun gear? In other words, there would be only the outside inside gear ring and several (let’s say two) planets. Are there formulas to calculate the required parameters for this type of arrangement?

WoW................ New Subb.......... PEACE POWER 🔋

I appreciate this video thanks. The only thing I'm lost on is calculating the distance of the planets. You say sun teeth times the "Module?". Did you say Module? What is the Module?

Can you recommend some documentation to build an EDM machine?

Very big like and subscribe

Great tutorial! I have a question: how did you calcolate the module?

I've been studying this stuff for a while, and have never seen a machine like this. What is it?

@BAXEDM what is the power consumption for cutting these part?

wow géniale

31:20 Why not just stick it in the oven for a few hours?

Nice work, subscribed! If you want more subs, feel free to embed your video on our homemade tools forum; looks like you're one of us :-)